Register / log-in to add to your Hammerwall Collection.
Manual Location
The Search Results for the Search Section to the left will appear here.
Page: 1
CompactControl and CompactDesigner Version 5.0 USER MANUAL ISSUE 5.0 REVISION 0  3D perception AS All rights reserved . The copyright of this document is the property of 3D perception AS . The document is supplied on the express terms that it is to be treated as confidential . No part of this document may be reproduced or transmitted in any form or by any means , electronic or mechanical for any purpose , without the express written permission of 3D perception AS . The information in this document is subject to change without notice and is provided ‘ AS IS ’ .
Page: 2
3D perception CompactControl and CompactDesigner G00047 User Manual End User License Agreement This 3D perception AS End - User License Agreement ( hereinafter ‘ EULA ’ ) is a legal Agreement between the CUSTOMER and 3D perception AS for this 3D perception AS software product , which includes computer software and associated media and printed materials , and may include ‘ online ’ or electronic documentation ( hereinaf ter ‘ Software Product ’ or S ‘ oftware ’ ) . By installing , copying , or otherwise using the Software Product , the CUSTOMER agrees to be bound by the terms of this EULA . Copyright laws and international copyright treaties , as well as other intellectual property laws and treaties protect the Software Product . The Software Product is licensed , not sold . License Granted All title and copyrights in and to the Software product ( including but not limited to any images , photographs , animations , video , audio , music and text incorporated into the Software Product ) , the accompanying printed materials , and any copies of the Software Product , are owned by 3D perception AS or its suppliers . Copyright laws and international treaty provisions protect the Software Product . Therefore , the CUSTOMER must treat the Software Product like any other copyrighted material , except that the CUSTOMER may either : a ) Make one copy of the Software Product solely for backup or archival purposes or b ) Install the Software Product on a single computer , provided the original is kept solely for backup or archival purposes . The CUSTOMER may not copy the printed materials accompanying the Software Product . In consideration of payment of the License fee , 3D perception AS grants the CUSTOMER a non - exclusive right to use and display the Software Product as long as they comply with the terms of this EULA . Multi - Media Software The CUSTOMER may receive the Software Product in more than one medium . Regardless of the type of or size of medium the CUSTOMER receives , they may use only one medium that is appropriate for a single computer . The CUSTOMER may not use or install the other medium on another computer . The CUSTOMER may not loan , rent , lease , or otherwise transfer the other medium to another user , except as part of the permanent transfer ( as provided above ) of the Software Product . License Rights and Limitations This EULA grants the CUSTOMER the following rights and limitations : � Systems Software The CUSTOMER may install and use one copy of the Software Product on a single computer . If the Software Product includes functionality that enables a single computer to act as a network server , any number of computers or workstations may access or otherwise utilise the basic services of that server , provided that this functionality is detailed in the Scope of Supply . � Storage / Network Use The CUSTOMER may also store or install a copy of the Software Product on a storage device , such as a network server used only to install or run the Software Product on other computers over an internal network . However , the CUSTOMER must acquire and dedicate a license for each separate computer on which the Software Product is installed or run from the storage device . A license for the Software Product may not be shared or used concurrently on different computers . � Limitations on Reverse Engineering , De - compilation , and Disassembly The CUSTOMER may not reverse engineer , de - compile , or disassemble the Software Product , except and only to the extent that such activity is expressly permitted by applicable law notwithstanding this limitation . � Rental The CUSTOMER may not rent or lease the Software Product to any third party . � Software Transfer Provided that the CUSTOMER obtains prior written authorisation by 3D perception AS , they may permanently transfer all of their rights under this EULA provided that : - • The CUSTOMER retains no copies • The CUSTOMER transfers all of the Software Product ( including all component parts , the media and printed materials , any upgrades , this EULA and , if applicable , the Certificate of Authenticity ) • The recipient agrees to the terms of this EULA . If the Software Product is an upgrade , any transfer must include all prior versions of the Software Product . � Termination The EULA granted herein shall remain in effect for an unlimited period unless the CUSTOMER fails to comply with any provision of this EULA . In which case , 3D perception AS has the right to terminate this license after having requested the CUSTOMER in writing to cure the failure and the CUSTOMER failed to do so within thirty ( 30 ) days of such notice . Upon termination the CUSTOMER shall return the Software Product and destroy all copies of the Software Product , including modified and adapted copies , if any . ii
Page: 3
3D perception CompactControl and CompactDesigner G00047 User Manual Limited Warranty � Defects in Material and Workmanship 3D perception AS warrants that : - • The Software Product will perform substantially in accordance with the accompanying written material for a period of ninety ( 90 ) days from the date of receipt • Any hardware accompanying the Software Product will be free from defects in material and workmanship under normal use and service for a period of one ( 1 ) year from the date of receipt 3D perception AS and its suppliers ’ entire liabilit y and the CUSTOMERS exclusive remedy shall be repair or replacement of the Software Product or hardware that does not meet 3D perception AS ’ Limited Warranty and which is returned to 3D perception AS with a copy of the receipt . This Limited Warranty is void if failure of the Software Product or hardware has resulted from accident , abuse , or misapplication . Any replacement Software Product or hardware will be warranted for the remainder of the original warranty period or thirty ( 30 ) days , whichever is longer . � Other Warranties To the maximum extent permitted by applicable law , 3D perception AS and its suppliers disclaim all other warranties , either express or implied , including , but not limited to , implied warranties of merchantability and fitness for a particular purpose , with regard to the software product , and any accompanying hardware . This limited warranty gives the CUSTOMER specific legal rights . � Consequential Damages To the maximum extent permitted by applicable law , in no event shall 3D perception AS or its suppliers be liable for any special , incidental , indirect , or consequential damages whatsoever . This includes , without any limitation , damages for loss of business profits , business interruption , loss of business information , or any other pecuniary loss arising out of the use of or inability to use the Software product , even if 3D perception AS has been advised of the possibility of such damages . � Third Party Software Performance deterioration or damage to the Software Product and hardware caused or contributed to by a third - party software installed on the computer system without prior written authorisation of 3D perception AS shall render any and all warranties by 3D perception AS null and void . � Computer Viruses Performance deterioration or damage to the Software Product and hardware caused or contributed to by computer viruses shall render any and all warranties by 3D perception AS null and void . Applicable Law This EULA shall be governed by Norwegian law and shall benefit 3D perception AS . The CUSTOMERS consent to jurisdiction of the Kingdom of Norway is governed by the laws of Norway . Upgrades If the Software Product is an upgrade from another product , whether from 3D perception AS or another supplier , the CUSTOMER may use or transfer the Software Product only in conjunction with that upgraded product , unless the CUSTOMER destroys the upgraded product . If the Software Product is an upgrade of a 3D perception AS product , the CUSTOMER now may use that upgraded product only in accordance with this EULA . If the Software Product is an upgrade of a component of a package of software programs that the CUSTOMER licensed as a single product , then the Software Product may be used and transferred only as part of that single product package . Under no circumstances must it be separated for use on more than one computer . iii
Page: 4
3D perception CompactControl and CompactDesigner G00047 User Manual DOCUMENT STATUS Issue / Month Year Paragraph ( s ) Prepared by Description of Change Revision 5.0 rev 0 February 2008 All A F Rotheram Initial release iv
Page: 5
3D perception CompactControl and CompactDesigner G00047 User Manual TABLE OF CONTENTS FOREWORD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . XIV 1 . INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 1 About CompactControl . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 1 About CompactDesigner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 1 2 . GETTING STARTED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 1 Software installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 1 Getting started with CompactView X10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 4 Getting started with CompactView X15 - I , X30 - I , SX15 - I , SX30 - I , SX25 + I , PZ30X & PZ30SX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 4 Getting started with CompactView X15 - E , X30 - E , SX15 - E , SX30 - E and SX25 + E . . . . . 2 - 4 Getting started with CompactView SX60 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 5 Getting started with CompactView HMR - 15 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 5 Connect control interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 5 Set functionality codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 6 Getting started with CompactUTM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 7 Connecting projectors in a chain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 8 Serial Port Adaptor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 8 3 . COMMANDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 1 File Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 1 New . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 2 Open . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 2 Open Dialogue Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 2 Close . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 3 Save . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 3 Save As . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 3 Save As dialogue box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 3 Export . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 4 Print ( CompactDesigner only ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 4 Print Preview ( CompactDesigner only ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 5 Page Set - up ( CompactDesigner only ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 5 Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 5 Projector type management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 10 Recent file . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 10 Exit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 10 v
Page: 6
3D perception CompactControl and CompactDesigner G00047 User Manual Edit Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 11 Undo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 11 Redo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 11 Cut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 11 Copy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 12 Paste . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 12 Delete . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 12 Scenario . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 12 Add Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 13 Add Screen Segment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 14 Add Eye Point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 14 Add Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 14 Add Projector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 14 Add CompactUTM processor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 15 Add Image source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 15 Add Mirror . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 15 Add Multi channel manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 15 Add Obstacle ( CompactDesigner only ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 16 Add Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 16 Add Geometry Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 16 Add Edge Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 16 Add Colour Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 17 Add Gamma Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 17 Add Mask adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 17 Add Hotspot adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 18 Add Scaling adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 18 Add Stereo adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 18 Add Scenario . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 19 Command Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 19 Red . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 19 Green . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 19 Blue . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 20 Disable Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 20 Show Outer Edge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 20 Test Pattern . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 21 Save to device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 21 Revert to Saved . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 21 Update device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 22 Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 22 Collision detect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 22 Scenario Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 22 Communication status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 23 Analyze Signal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 23 Colour Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 23 Auto Calibrate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 23 View Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 24 Toolbars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 24 Status Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 24 vi
Page: 7
3D perception CompactControl and CompactDesigner G00047 User Manual Tree / Properties view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 24 Window Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 25 New 3D View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 25 New 2D View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 25 New Coverage Diagram command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 26 New Plot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 27 New Report View ( CompactDesigner only ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 28 Cascade command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 28 Tile command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 29 Arrange Icons command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 30 1,2,3 , etc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 30 Help Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 30 Help Topics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 30 About CompactDesigner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 33 Technical support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 33 3D Perception on the Web . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 33 4 . TOOLBARS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 1 Main toolbar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 1 Create Item toolbar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 2 Disable Adjustments toolbar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 3 Test Patterns toolbar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 4 Scenario toolbar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 4 5 . PROJECTION THEATRE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 1 The hierarchical tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 1 Permanent groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 2 Short - cut groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 2 Parameter dialogues . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 3 View Segments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 3 Theatre 2D View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 3 Theatre 3D View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 4 Theatre Coverage Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 4 Theatre Resolution plot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 5 Theatre Luminance plot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 5 Build of a theatre . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 6 6 . PROJECTION THEATRE PROPERTIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 1 Projection Theatre properties Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 1 Projection Theatre properties Communication status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 2 Projection Theatre settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 2 Projection Theatre Errors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 3 vii
Page: 8
3D perception CompactControl and CompactDesigner G00047 User Manual 7 . CHANNEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 1 All Channel level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 1 Single Channel with a Projector added . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 2 Multiple Channels with projectors added . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 4 Single Channel with an Image source added . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 6 Multiple Channels with Image sources added . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 8 Single Channel with a Projector an Image source added . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 10 Multiple Channels with projectors and Image sources added . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 12 Individual Channel level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 14 Add a channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 15 Channel properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 15 Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 16 Channel and projector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 17 Channel and image source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 19 Channel projector and image source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 21 Channel projector and CompactUTM processor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 24 Channel projector CompactUTM processor and image source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 26 8 . SCREEN PROPERTIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 1 All screens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 1 All screens same type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 1 All screens mixed type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 1 All screens Reflectivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 2 Compact Click Screens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 3 A CompactClick 325 Spherical screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 4 Sensor Array . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 5 A CompactClick 600 Cylindrical screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 5 Click Reflectivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 6 Segments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 7 Click Screen error . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 7 Sensor Array . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 7 Generic Screens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 8 A Generic flat screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 8 A Generic cylindrical screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 9 A Generic conical screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 10 A Generic spherical screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 11 Reflectivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 12 Segments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 13 Single screen error . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 13 9 . EYE POINT PROPERTIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 1 Eye point All . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 1 Eye point Individual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 1 Eye point general . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 2 Eye point error . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 3 viii
Page: 9
3D perception CompactControl and CompactDesigner G00047 User Manual 10 . ADD NEW PROJECTOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 1 Add with a channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 1 Add to an existing channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 1 Add directly to theatre . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 2 11 . PROJECTOR PROPERTIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 - 1 All projectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 - 1 Type A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 - 2 Type B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 - 7 Type C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 - 12 Type D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 - 17 Type E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 - 23 Type F . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 - 29 Type G . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 - 35 Type Z . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 - 42 Mixed Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 - 46 Individual projector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 - 49 Type A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 - 50 Type B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 - 55 Type C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 - 63 Type D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 - 68 Type E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 - 77 Type F . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 - 83 Type G . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 - 94 Type Z . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 - 100 12 . COMPACTUTM PROCESSOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 - 1 Add with a channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 - 1 Add to a channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 - 1 Add direct . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 - 2 CompactUTM processor properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 - 2 All CompactUTM processors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 - 3 Individual CompactUTM processor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 - 5 13 . IMAGE SOURCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 - 1 Add with a channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 - 1 Add to a channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 - 1 Add direct . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 - 2 Image source properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 - 2 Image Source Groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 - 2 Individual Image Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 - 4 3D Graphics ( View normal and half angles ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 - 4 3D Graphics ( View Frustrum coordinates ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 - 8 3D Graphics ( OpenGL projection matrix ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 - 11 2D Graphics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 - 13 Other Video source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 - 16 ix
Page: 10
3D perception CompactControl and CompactDesigner G00047 User Manual 14 . SCENARIOS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 - 1 Add new Scenario . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 - 1 Scenario Manager View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 - 1 Scenario Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 - 1 Interpolation Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 - 2 15 . GEOMETRY ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 - 1 Type Nurbs Mesh . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 - 2 Geometry Adjustment : Example usage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 - 5 Auto Calculated . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 - 7 Load from file . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 - 8 16 . EDGE ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 - 1 Edge Adjustment properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 - 3 Example usage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 - 6 17 . COLOUR ADJUSTMENT PROPERTIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 - 1 18 . GAMMA ADJUSTMENT PROPERTIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 - 1 19 . MASK ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 - 1 Mask adjustment properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 - 1 20 . SCALING ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 - 1 Scaling adjustment properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 - 1 21 . STEREO ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 - 1 Stereo adjustment properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 - 1 22 . BLACK LEVEL ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 - 2 23 . MIRROR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 - 1 24 . OBSTACLES PROPERTIES ( COMPACTDESIGNER ONLY ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 - 1 All obstacle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 - 1 All obstacles same type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 - 1 All obstacles mixed types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 - 1 Single Obstacles - General page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 - 2 Obstacle Type Box - General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 - 3 Obstacle Type Cylinder - General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 - 4 x
Page: 11
3D perception CompactControl and CompactDesigner G00047 User Manual Obstacle Type File - General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 - 5 25 . COLLISION DETECT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 - 1 Automatic Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 - 1 Manual Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 - 2 Disabled . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 - 2 26 . ANALYSE SIGNAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 - 1 Histogram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 - 1 Waveform . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 - 2 27 . COLOUR CALIBRATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 - 1 Graph . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 - 1 Reference Colours . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 - 2 Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 - 2 Channel Measurement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 - 2 28 . HOTSPOT ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 - 1 29 . MULTI CHANNEL MANAGER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 - 1 Multi channel manager Add . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 - 2 Multi channel manager properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 - 4 Multi channel manager example . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 - 7 Typical scenario . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 - 15 30 . QUICK GUIDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 - 1 Creating a projection theatre . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 - 1 Adding a screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 - 2 Adding an Eye point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 - 3 Coverage Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 - 5 Add channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 - 5 Set up communication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 - 6 Align Projectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 - 7 Check Projector Communication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 - 7 Adding Geometry Adjustment Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 - 8 Adjusting geometry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 - 8 Adding Edge Adjustment Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 - 9 The Edge Adjustment control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 - 10 xi
Page: 12
3D perception CompactControl and CompactDesigner G00047 User Manual 31 . USER DEFINED GROUPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 - 1 Create a user defined group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 - 1 Edit Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 - 2 32 . PROJECTOR TYPE MANAGEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 - 1 Create or amend a projector definition file . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 - 2 33 . INSIDE HIERARCHICAL TREE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 - 1 Advance Position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 - 1 34 . INSIDE 3D VIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 - 1 35 . INSIDE 2D VIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 - 1 36 . INSIDE COVERAGE DIAGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 - 1 37 . NEW RESOLUTION PLOT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 - 1 38 . NEW LUMINANCE PLOT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 - 1 39 . AUTO CALIBRATE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 - 1 40 . REPORT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 - 1 Select report type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 - 1 Tailor report . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 - 2 Report contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 - 3 Report type management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 - 10 41 . TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 - 1 42 . SYSTEM SET - UPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 - 1 Simple Set - Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 - 1 Network Set_Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 - 2 Network Set - Up with Image Generators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 - 3 Software in Lap Top . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 - 4 Software in CompactUTM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 - 5 With Stereo Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 - 6 43 . WINDOWS REGISTRY SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 - 1 CompactDesigner / CompactControl . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 - 2 xii
Page: 13
3D perception CompactControl and CompactDesigner G00047 User Manual Communication Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 - 4 Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 - 5 44 . PARTS LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 - 1 Main products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 - 1 45 . ALPHABETIC INDEX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 - 1 xiii
Page: 14
3D perception CompactControl and CompactDesigner G00047 User Manual FOREWORD CompactControl and CompactDesigner are both delivered accompanied by a very comprehensive on - line Help service . As with most on - line Help services however , although usually very good , they are far easier to navigate once you k ‘ now ’ what you are looking for . The trick of course is to k ‘ now ’ w hat you are looking for and until you are familiar with the system you may not always be aware of what there is and what it is called . With this in mind , this manual has been published , not as an alternative to the CompactControl and CompactDesigner on - line Help service but rather as a compliment to it . With a quick glance through the Contents List the reader may gleam some of the procedures and functionality within the system . Alternatively , as an aid to re - locating specific features , chapter 41 is an alphabetical reference index . So the choice is yours . You can start reading this manual just like a book , starting at chapter 1 and going through to the end . Or you may want to read the content list and then read specific chapters that have taken your interest . You may even decide to start with chapter 28 , the Quick Guide to the system . Perhaps you will even load the software and t ‘ ry it out ’ and refer to the manual a s and when you need to . The choices are infinite and they are all yours . It just remains for us to wish you ‘ Good luck ’ and to hope that you find this manual a most useful tool to assist you with either CompactControl or CompactDesigner , whichever you have chosen . 3D perception AS Solbråveien 41 P.O.Box 455 1373 Asker Norway Telephone + 47 66 98 70 71 Fax + 47 66 98 70 71 e - mail info @ 3d - perception.com website www . 3d - perception.com xiv
Page: 15
3D perception CompactControl and CompactDesigner G00047 User Manual 1 . INTRODUCTION The CompactControl and CompactDesigner software may be installed either directly from a CD - ROM or by downloading from the Internet . After registering with 3D perception , and depending on the type of software license purchased , you will have either CompactControl or CompactDesigner loaded on your PC . CompactControl provides the user with full geometry , edge , gamma and colour control of projectors whereas CompactDesigner , as well as offering all that CompactControl offers , also facilitates the complete design of projection theatres along with in - depth analysis . This manual describes in detail the full range of all facilities offered by both CompactControl and CompactDesigner and clearly indicates any area that is only covered by CompactDesigner . About CompactControl CompactControl allows the user to set up a model of the actual theatre scenario by placing the appropriate combination of projectors , CompactUTM processors , Image sources and screen elements , in the theatre model at their correct physical locations . CompactControl then allows the user to perform geometry adjustment , edge blending , gamma correction and colour balancing in order to create a continuous picture with evenly distributed light intensity . About CompactDesigner CompactDesigner , whilst offering all the same facilities as CompactControl , also assists in the designing of Projection Theatres based on known room measurements , specifics of projectors and screen geometry . Many of the processes are automated . The designer may input various types of screens or screen elements , projector types , position both screen and projectors , define eye point , or even multiple eye points for simulation activities that require this . CompactDesigner calculates the parameters for very accurate Non - Linear Image Mapping ( NLIM ) in order to provide a high quality image as seen from the selected eye points . Between projectors , the designer is free to select edge blending zones and the intensity fall off characteristics , gamma correction and colour balance . All to create a seamless continuous picture with evenly distributed light intensity . 1 - 1
Page: 16
3D perception CompactControl and CompactDesigner G00047 User Manual Know your CompactDesigner Version 4 - Standard Consists of the following modules • CompactControl • Screen Analysis • Focus Analysis • 3D perception Projector Analysis • Obstacle Analysis • Collision Detect • Report Generation Optional Extra Modules Module 1 – Advance Engineering Tool Module 2 – 2D Drawings and CAD Interface Module 3 – User Defined Projector Analysis Module 4 – ColourMatcher Version 4 – Salesman’s Tool ( VAR’s only ) Consists of the following modules • CompactControl ( 2 projectors only ) • Screen Analysis • Focus Analysis • 3D perception Projector Analysis • Obstacle Analysis • Collision Detect • Report Generation 1 - 2
Page: 17
3D perception CompactControl and CompactDesigner G00047 User Manual 2 . GETTING STARTED Whether a CompactDesigner user or a CompactControl user , the first step to be undertaken is to install the software onto a PC , Laptop or CompactUTM and to a ‘ ctivate ’ the software with a software license . CompactDesigner Users After installing the software users of CompactDesigner that are designing projection theatres and analysing the results may proceed directly to relevant chapters within this help system . First time users may wish to start with an overview of all menus . More practised users can go directly to particular areas or to the Quick Guide . CompactControl Users After installing the software users CompactControl users are advised to first study the relevant areas detailing the connection of their selected projectors . CompactView X15 - I CompactView X15 - E CompactView X30 - I CompactView X30 - E CompactView SX15 - I CompactView SX15 - E CompactView SX30 - I CompactView SX30 - E CompactView SX25 + I CompactView SX25 + E CompactView PZ30X CompactView X30Basic CompactView PZ30SX CompactView SX30Basic CompactView X10 CompactView HMR - 15 CompactView SX60 All Genetic projectors Software installation The software is delivered on CD - ROM media , or is downloaded from the Internet . You may either have a CD with software , or a downloaded self - extracting executable file . NOTE : Installation on a Laptop If the software is to be loaded onto a laptop PC that normally resides in a docking station and there are 2 or more network cards in the system , the installation procedures must be performed with the laptop in an undocked state . The computer ID will be calculated ensuring that there is no conflict with the network cards . Installation from CD - ROM Insert the CD - ROM . Depending on your computer’s se t - up , the installation program may start automatically . If it does not , you need to locate the set - up program on the root directory of the CD : Double - click the icon to start the set - up procedure . 2 - 1
Page: 18
3D perception CompactControl and CompactDesigner G00047 User Manual Installation from self - extracting executable Locate the executable file and double - click its icon to start the set - up procedure . The installation procedure will now guide you through the set - up process . Software License The set - up program requires you to enter the License number ( from the license certificate issued with the software ) and a valid software license key . The following procedure is for setting up your license for CompactDesigner and CompactControl . The first time you run the set - up program , the CompactDesigner Setup dialogue box will appear . Enter your name and Company name and click < Next > . A second CompactDesigner Setup dialogue box will appear . This dialogue box will give you the Machine ID for the target computer . It will also have a field for the License number and will have the License key set at the default value of CV0000 - 0 - 0000 - 00000000 - 00000000 . The License key is based on the unique ID of the target computer . To obtain a License Key code you must send the Machine ID and the License number from your license certificate to your distributor , who in turn will send back to you the necessary license key code . Once you have received the License Key code for your machine , run the set - up program again . This time enter both the License number from the license certificate and the License key code . The set - up program will not allow you to continue until a valid License number and License key have been entered . 2 - 2
Page: 19
3D perception CompactControl and CompactDesigner G00047 User Manual License Info License setup 2 - 3
Page: 20
3D perception CompactControl and CompactDesigner G00047 User Manual Getting started with CompactView X10 1 . Connect the projector to a video signal source using the supplied cables . The video signal must be connected to the Enhanced Video , the Composite Video or the S - VHS connector port on the projector . 2 . Connect the Control PC ( running CompactControl or CompactDesigner ) to the projectors Control Chain In socket on the side of the projector . The supplied 6 - lead cable plugs into the PC’s serial port using an adapter ( 9 - pin to RJ - 45 ) . 3 . Connect the projector to AC power and switch on . 4 . Start CompactDesigner or CompactControl ( depending on your software configuration ) . For complete details please refer the CompactView X10 User Manual . Getting started with CompactView X15 - I , X30 - I , SX15 - I , SX30 - I , SX25 + I , PZ30X & PZ30SX 1 . Connect the projector to a video signal source using the supplied cables . The video signal must be connected at the rear of the projector . 2 . Connect the Control PC ( running CompactControl or CompactDesigner ) to the projectors Control Chain In socket on the side of the projector . The supplied 6 - lead cable plugs into the PC’s serial port using an adapter ( 9 - pin to RJ - 45 ) . 3 . Connect the projector to AC power and switch on . 4 . Start CompactDesigner or CompactControl ( depending on your software configuration ) . For complete details please refer to the relative user manuals . Getting started with CompactView X15 - E , X30 - E , SX15 - E , SX30 - E and SX25 + E Getting started with CompactView X15 - E , X30 - E , SX15 - E , SX30 - E , and SX25 + E projectors is the same as for generic projectors , connection via a CompactUTM . For complete details please refer to the relative user manuals . 2 - 4
Page: 21
3D perception CompactControl and CompactDesigner G00047 User Manual Getting started with CompactView SX60 Getting started with CompactView SX60 projectors is the same as for generic projectors , connection via a CompactUTM . For complete details please refer to the relative user manual . Getting started with CompactView HMR - 15 The first time the CompactView HMR - 15 is switched on , a message will appear on the screen requesting a valid license key ( activation code ) for the projector . The message box will also indicate the following details for the projector : Address Software version IP address The following procedures now require completion before the CompactView HMR - 15 projector is ready for use . 1 . Connect control interface 2 . Set functionality codes for projectors 3 . Set computer source for projectors Connect control interface Connect the Control PC ( running CompactDesigner or CompactControl ) to the projectors RS232 In port The supplied 6 lead cable plugs into the Control PC’s serial port using a RJ12 6 pin to serial DB - 9 female adapter . Alternatively the projector may be connected to either LAN or WLAN For full details please refer to the CompactView HMR - 15 User Manual 2 - 5
Page: 22
3D perception CompactControl and CompactDesigner G00047 User Manual Set functionality codes Select Projectors on the drop - down menu under Maintenance on the main File menu On the Projector maintenance dialogue box click right on the desired projector and select Properties from the drop - down menu . NOTE : The address of all CompactView HMR - 15 projectors will commence with the characters CH . On the IP address dialogue page , if the IP address and Subnet mask are set automatically ( default option ) , the DHCP standard protocol will be used to assign the address . If the IP address and Subnet mask are to be set manually , it is recommended that users consult with their own network administrator . 2 - 6
Page: 23
3D perception CompactControl and CompactDesigner G00047 User Manual On the Security key dialogue page enter the unique Security key for the projector . Press " Update " once and then press " OK " . This will register and activate the optional modules purchased . NOTE : The security key for each projector can be obtained by e - mail from 3D perception . Send the projector address ( CH . … ) of ea ch projector to any of the sales staff , support staff or to info @ 3d - perception.com or support @ 3d - perception.com You will not see any notification or warnings when you press the " update " button Wait for 30 seconds and the projector will then start to scan for source . For complete details please refer to the CompactView HMR - 15 user manual . Getting started with CompactUTM All generic and CompactView X30Basic , SX30Basic , X15 - E , X30 - E , SX15 - E , SX30 - E , SX25 + E and SX60 projectors are connected to a CompactUTM . The upper DVI - I sockets at the rear of the CompactUTM are input ports ; the lower sockets are the output ports . Both Digital and Analogue signals may be received and transmitted through the appropriate sockets of the CompactUTM channels . The CompactUTM will automatically determine the type of input signal after the plug has been introduced to the socket . Both Digital and Analogue signals will be active on the output port . For complete details please refer to the CompactUTM User Manual . Stereo Adapter Cable The stereo adapter cable is required when using the Stereo option 2 - 7
Page: 24
3D perception CompactControl and CompactDesigner G00047 User Manual Connecting projectors in a chain Multiple projectors may be connected together in a d ‘ aisy chain ’ by using the input and output serial connectors on each projector . The first projector is connected to the host PC using a 6 - lead cable with RJ - 45 connectors on both ends . This cable connects to the PC through the supplied adapter ( 9 - pin to RJ - 45 ) . The other end plugs into the Control Chain In socket on the first projector . From the first projector , another 6 - lead cable is used to connect the Control Chain Out socket on the first projector to the Control Chain In socket on the next . This chain can be extended up to the theoretical limit of 255 projectors in a single chain . Serial Port Adaptor The detail view of connectors is as seen from the outside of the adapter . 2 - 8
Page: 25
3D perception CompactControl and CompactDesigner G00047 User Manual Connections DB9 RJ12 Signal Colour Coding ( standard adapter ) 2 3 RxD Green 3 1 TxD Blue 5 2 GND Yellow ( 5 ) 4 GND ( see note ) - Communication cable RJ12 pin 4 ( GND ) can be left open for short cable lengths ( less than approximately 10m / 30ft ) . For longer cable lengths , connect both ground wires and use twisted pair cable ( 1 - 2 , 3 - 4 twisted ) . The cable should be connected as shown below , i.e . not t ‘ wisted ’ : If twisted pair cable is used , the pairs must be 1 - 2 , 3 - 4 , and 5 - 6 . Maximum cable length for one connection ( PC to projector or projector to projector ) is determined by EIA / RS - 232C , specifications for serial communication at 38 400 bps . Stereo adapter cable 2 - 9
Page: 26
3D perception CompactControl and CompactDesigner G00047 User Manual 2 - 10
Page: 27
3D perception CompactControl and CompactDesigner G00047 User Manual 3 . COMMANDS The following Command menus are available from the top line of the screen . File Menu The File menu offers the following commands : New Creates a new theatre . Open Opens an existing theatre . Close Closes an opened theatre . Save Saves an opened theatre using the same file name . Save As Saves an opened theatre to a specified file name . Export Export current view to CAD file Print Prints a report . Print Preview Displays the report on the screen in pages as it would appear printed Page Set - up Set up page for print with paper size and orientation etc . Maintenance Updates the license / projector / object inspector data . Projector type Add or amend details of different projector types management Recent Files Re - open recently closed theatres . Exit Exit CompactControl and CompactDesigner . 3 - 1
Page: 28
3D perception CompactControl and CompactDesigner G00047 User Manual New Creates a new Theatre in CompactControl and CompactDesigner . Shortcut Toolbar : Keys : CTRL + N Open Use this command to open an existing theatre in a new window . The File Open dialogue box will appear . You can open multiple theatres at once . Use the Window menu to switch among the multiple open theatres . See Window 1 , 2 , . . . command . Shortcut Toolbar : Keys : CTRL + O Open Dialogue Box The Open dialogue box allows you to specify which file to open : Look in Select the directory from which you want to open a theatre . File Name Type or select the filename you want to open . This box lists files with the extension you select in the List Files of Type box . 3 - 2
Page: 29
3D perception CompactControl and CompactDesigner G00047 User Manual Files of Type Select the type of file you want to view . NOTE : The file type for projection theatre designs must be P ‘ rojection theatre design ( * . cvd ) . ’ If you select A ‘ ll files ( * . * ) ’ you may view all files , but only valid design files can be opened . Close Use this command to close all windows containing the active theatre . The system suggests that you save changes to your theatre before you close it . If you close a theatre without saving it , you lose all changes made since the last save . If you respond with < Yes > on the prompt dialogue box then the system will display the Save As dialogue box . You can also close a theatre by clicking on the close button in the upper right hand corner : Save Use this command to save the active theatre to its current name and directory . When you save a theatre for the first time , the system displays the Save As dialogue box in order that you can name your theatre . If you want to change the name and directory of an existing theatre before you save it , choose the Save As command . Shortcut Toolbar : Keys : CTRL + S Save As Use this command to save and name the active theatre . The system displays the Save As dialogue box in order that you can both name your theatre and specify where you wish to save it . Save As dialogue box The Save As dialogue box allows you to specify the name and location of the file you're about to save : 3 - 3
Page: 30
3D perception CompactControl and CompactDesigner G00047 User Manual Save in Select the directory in which you want to store the theatre . File Name Enter a new file name to save a theatre with a different name . Save as type The system adds the extension you specify in the Save as type box . NOTE : The file type for projection theatre designs must be P ‘ rojection theatre design ( * . cvd ) ’ . Export Export the current view ( either 3D View or 2D drawing ) to AutoCAD as a . dxf file . Print ( CompactDesigner only ) Only active after a New Report has been generated . The print facility will print a report after a N ‘ ew Report View ’ has been generated from the Window menu . NOTE : The minimum system requirement for the print function is Internet Explorer 5.5 . For full details of the report see Report . 3 - 4
Page: 31
3D perception CompactControl and CompactDesigner G00047 User Manual Shortcut Toolbar : Keys : CTRL + P Print Preview ( CompactDesigner only ) Only active after a New Report has been generated . The print preview shows on screen the report in pages , as it will appear in print . Page Set - up ( CompactDesigner only ) Only active after a New Report has been generated . The page set - up will allow you to set up the page characteristics prior to printing . Maintenance Maintenance offers a second menu with the following options : 3 - 5
Page: 32
3D perception CompactControl and CompactDesigner G00047 User Manual License The license dialogue box allows you to view and modify license information for your system . The dialogue box shows the status of the current license and the machine ID . There are also entry fields for the License number and the license key . For full details on setting up software license see chapter Getting started Projectors The Projector maintenance dialogue box contains the following data for all Projectors , CompactUTM processors , Image sources and Multi channel managers Name Address Status update Software version Timeout count Last timeout Chain address 3 - 6
Page: 33
3D perception CompactControl and CompactDesigner G00047 User Manual The Projector maintenance dialogue box allows the user to perform the following functions : � Update Software � Save to devices � Restart projectors � Restore factory defaults � Clean up list � Always on top Perform above functions to individual devices To perform action functions to an individual device , select a device from the list and click right for a drop - down menu Details Note . If the details are printed in green then communication is maintained with the units . If the details are printed in red then communication has been broken . Name The identity of the Item ( e.g . Projector 1 or Multi channel manager 1 ) Address The address of the Item ( e.g . CM3d00 - 1234 - 1234 - 0001 ) Status An incrementing time display showing latest communication with update relevant driver ( e.g . 10 : 50 : 07 ) Software The current software version of the relevant driver version Timeout The number of times communication has been broken count Last timeout The time communication was last broken Chain The relative position of the Item within a chain . address Update Software Click the Update Software button and a warning dialogue box will appear . To proceed click Yes . 3 - 7
Page: 34
3D perception CompactControl and CompactDesigner G00047 User Manual On the Select Upgrade Software file dialogue box you will be given the option to upgrade either the front - end processor software or the GCM software . To update simply select file type from the pull down menu and then open the required file . NOTE : For the front - end processor software it is recommended to perform the updates with only one projector connected at a time . The GCM software can be updated with all projectors connected . Update software for individual devices To update software for an individual device , select the device on the list , click right and select Update software on the drop - down menu . Restart projectors Depress this button to restart all active devices . Restart individual devices To restart an individual device , select the device on the list , click right and select Restart device on the drop - down menu . 3 - 8
Page: 35
3D perception CompactControl and CompactDesigner G00047 User Manual Clean up list This function enables you to remove disconnected projectors from the projectors list , i.e . those listed in red as opposed to those listed in green . Save to devices This function saves the current settings from the RAM storage area of the projector or the CompactUTM processor into the permanent Flash memory . Save individual devices To save to an individual device , select the device on the list , click right and select Save to device on the drop - down menu . Restore factory defaults This function restores the factory default settings in the projector . Restore factory default to individual devices To restore factory defaults to an individual device , select the device on the list , click right and select Restore factory default on the drop - down menu . Always on top When the Always on top option has been selected , the CVmaintenance test dialogue box will always be the top window visible until it has been closed . Properties ( only applicable to CompactView HMR - 15 ) Select a CompactView HMR - 15 projector on the list [ CH ] … , click right and select Properties on the drop - down menu . 3 - 9
Page: 36
3D perception CompactControl and CompactDesigner G00047 User Manual The dialogue box for CompactView HMR - 15 properties will appear with the following pages : IP address WLAN Lamp Security key CW For full details see Getting started with CompactView HMR - 15 Object Inspector The object inspector resides in the software to allow 3D Perception software engineers to inspect and debug the system . Users should not attempt to make any changes within this area unless specifically instructed to do so by 3D Perception personnel . Projector type management This facility allows the user to add new projector definition files and to amend existing projector definition files . For full details of this facility see chapter Projector Type Management Recent file Locate the cursor on Recent files and a sub - menu will appear that lists the files you have most recently opened in the system . To quickly reopen one of these files , click on it . Exit Use this command to end your system session . You can also use the Close command on the application Control menu . The system prompts you to save theatres with unsaved changes . Shortcut Mouse : Click on the close button in the upper right hand corner . 3 - 10
Page: 37
3D perception CompactControl and CompactDesigner G00047 User Manual Edit Menu The Edit menu offers the following commands : Undo Reverse previous editing operation . Redo Re - apply previous Undo operation . Cut Deletes data from the theatre and moves it to a storage area . Copy Copies data from the theatre to a storage area . Paste Pastes data from the storage area into the theatre . Delete Deletes data from the theatre and does not save it in a storage area . Scenario Allows for the editing of scenarios Undo Undoes the last editing action , if possible . The name of the command changes , depending on what the last action was . The Undo command changes to Can't Undo on the menu if you cannot reverse your last action . Shortcut Toolbar : Keys : CTRL + Z Redo Redoes the effect of the last undo , if any . Unless an undo operation has just been performed , this command will be disabled . Shortcut Toolbar : Keys : CTRL + Y Cut Removes the currently selected data from the theatre and puts it in a storage area . This command is unavailable if there is no data currently selected . Cutting data to the storage area replaces the contents previously stored there . Shortcut Toolbar : Keys : CTRL + X 3 - 11
Page: 38
3D perception CompactControl and CompactDesigner G00047 User Manual Copy Copies selected data into a storage area . This command is unavailable if there is no data currently selected . Copying data to the storage area replaces the contents previously stored there . Shortcut Toolbar : Keys : CTRL + C Paste Pastes ( copies ) data from the storage area . This command is unavailable if there is no data currently in the storage area . Shortcut Toolbar : Keys : CTRL + V Delete Deletes selected data . This command is unavailable if there is no data currently selected . Deleting data will not place it in a storage area . Shortcut Toolbar : N / A Keys : Del Scenario Edit a scenario . ( Only available after a Scenario has been added ) . For full details see chapter Scenarios . 3 - 12
Page: 39
3D perception CompactControl and CompactDesigner G00047 User Manual Add Menu The Add menu offers the following commands : Screen segment Add a new screen segment to the current theatre Eye point Add a new eye point to the current theatre Channel Add a Channel to the current theatre . Projector Add a new projector to the current theatre CompactUTM Add a new CompactUTM processor to the selected Channel Image source Add a new Image source to the selected Channel Mirror Add a new mirror to the current theatre Multi channel Add a new multi channel manager to the current theatre manager Obstacle Add an obstacle to the current theatre Group Add a new user - defined group of objects Geometry adjustment Add a new geometry adjustment to the current projector Edge adjustment Add a new edge adjustment to the current projector Colour adjustment Add a new colour adjustment to the current projector Gamma adjustment Add a new gamma adjustment to the current projector Mask adjustment Add a new mask adjustment to the selected projector Hotspot adjustment Add a new hotspot adjustment to the selected projector Scaling adjustment Add a new scaling adjustment to the selected projector Stereo adjustment Add a new stereo adjustment to the selected projector Scenario Add a new scenario to the current theatre 3 - 13
Page: 40
3D perception CompactControl and CompactDesigner G00047 User Manual Add Screen Segment Use this command to insert a new screen segment into the current theatre . The properties of the new screen can be set via the screen segment dialogue , see Screen properties Shortcut Toolbar : Keys : N / A Add Eye Point Use this command to insert a new eye point into the current theatre . The properties of the new eye point can be set via the eye point dialogue , see Eye point properties Shortcut Toolbar : Keys : N / A Add Channel Use this command to insert Channels into the current theatre . The properties of Channels can be set via the Channels properties dialogue , see Channel properties Shortcut Toolbar : Keys : N / A Add Projector Use this command to insert a new projector into the current theatre . A new projector may be added directly to a theatre , in which case a Channel will also be added and a link between the two created . Alternatively a projector may be added directly with a link to an existing Channel that does not already contain a projector by first selecting the Channel . For full details of adding a projector see Add New Projector The properties of the new projector can be set via the projector properties dialogue , see Projector Properties Shortcut Toolbar : Keys : N / A 3 - 14
Page: 41
3D perception CompactControl and CompactDesigner G00047 User Manual Add CompactUTM processor Use this command to add a new CompactUTM processor to a Channel . The command will not be available until a Channel that does not have a CompactUTM processor attached has been selected . The properties of the new processor can be set via the CompactUTM processor dialogue , see CompactUTM processor properties Shortcut Toolbar : N / A Keys : Add Image source Use this command to add a new Image source to a Channel . The command will not be available until a Channel that does not have an Image source attached has been selected and there is an Eye point present in the theatre . The properties of the new Image source can be set via the Image source dialogue , see Image source properties . Shortcut Toolbar : Keys : N / A Add Mirror Use this command to insert a new mirror into the current theatre . The command will not be active until there is at least one Channel containing a projector present ; and the Channel or any element within the Channel has been selected . The properties of the new mirror can be set via the mirror dialogue , see Chapter - Mirror Shortcut Toolbar : Keys : N / A Add Multi channel manager Use this command to insert a new multi channel manager into the current theatre . The properties of the new multi channel manager can be set via the multi channel manager dialogue , see Chapter - Multi channel manager Shortcut Toolbar : Keys : N / A 3 - 15
Page: 42
3D perception CompactControl and CompactDesigner G00047 User Manual Add Obstacle ( CompactDesigner only ) Use this command to insert obstacles into the current theatre . The properties of the obstacles can be set via the obstacles dialogue , see Obstacles Properties . Shortcut Toolbar : Keys : N / A Add Group Use this command to define a new group of items . Groups can be used to control multiple objects in parallel , for example for moving a group of projectors around , while other projectors remain fixed . By default , all items ( projectors , screen segments , etc . are included in default groups when they are created . These groups are named A ‘ ll projectors ’ , A ‘ ll screen segments , ’ etc . These groups cannot be changed or renamed . Shortcut Toolbar : Keys : N / A For full details on User Defined groups see Chapter User Defined Groups Add Geometry Adjustment Use this command to insert a new geometry adjustment . The command will not be active until there is a screen present ; an eye point present ; at least one Channel containing a projector present ; and the Channel or any element within the Channel has been selected . The properties of the new geometry adjustment can be set via the geometry adjustment dialogue , see Geometry adjustment Shortcut Toolbar : Keys : N / A Add Edge Adjustment Use this command to insert a new edge adjustment . The command will not be active until there is a screen present ; an eye point present ; at least two Channels containing a projector present ; and one of the Channels or any element within that Channel has been selected . The properties of the new edge adjustment can be set via the edge adjustment dialogue , see Edge adjustment properties Shortcut Toolbar : Keys : N / A 3 - 16
Page: 43
3D perception CompactControl and CompactDesigner G00047 User Manual Add Colour Adjustment Use this command to insert a new colour adjustment . The command will not be active until there is a screen present ; an eye point present ; at least one Channel containing a projector present ; and the Channel or any element within the Channel has been selected . The properties of the new colour adjustment can be set via the colour adjustment dialogue , see Colour adjustment properties Shortcut Toolbar : Keys : N / A Add Gamma Adjustment Use this command to insert a new gamma adjustment . The command will not be active until there is a screen present ; an eye point present ; at least one Channel containing a projector present ; and the Channel or any element within the Channel has been selected . The properties of the new gamma adjustment can be set via the gamma adjustment dialogue , see Gamma adjustment properties Shortcut Toolbar : Keys : N / A Add Mask adjustment Use this command to add a new Mask adjustment . The command will not be active until there is a screen present ; an eye point present ; at least one Channel containing a projector present ; and the Channel or any element within the Channel has been selected . The properties of the new Mask adjustment can be set via the Mask adjustment dialogue , see Mask adjustment properties : Shortcut Toolbar : Keys : N / A 3 - 17
Page: 44
3D perception CompactControl and CompactDesigner G00047 User Manual Add Hotspot adjustment Use this command to add a new Hotspot adjustment . The command will not be active until there is a screen present ; an eye point present ; at least one Channel containing a projector present ; and the Channel or any element within the Channel has been selected . The properties of the new Hotspot adjustment can be set via the Hotspot adjustment dialogue , see Hotspot adjustment properties : Shortcut Toolbar : Keys : N / A Add Scaling adjustment Use this command to insert a new scaling adjustment . The command will not be active until the theatre contains a screen ; an eye point ; at least one Channel containing a CompactUTM processor ; and the Channel or any element within the Channel has been selected . NOTE : Only valid on CompactUTM zero models SXGA plus , UXGA plus and UXGA vpi . The properties of the new scaling adjustment can be set via the scaling adjustment dialogue , see Chapter - Scaling adjustment Shortcut Toolbar : Keys : N / A Add Stereo adjustment Use this command to insert a new stereo adjustment . The command will not be active until the theatre contains a screen ; an eye point ; at least one Channel containing a CompactUTM processor ; and the Channel or any element within the Channel has been selected . NOTE : Only valid on CompactUTM zero models XGA plus , SXGA plus , UXGA plus and UXGA vpi . The properties of the new stereo adjustment can be set via the Stereo adjustment dialogue , see Chapter - Stereo adjustment Shortcut Toolbar : Keys : N / A 3 - 18
Page: 45
3D perception CompactControl and CompactDesigner G00047 User Manual Add Scenario Add a new Scenario . For full details of Scenario’s see Scenario Shortcut Toolbar : Keys : N / A Command Menu The Command menu offers the following commands : Red Switch On / Off the red signal Green Switch On / Off the green signal Blue Switch On / Off the blue signal Disable adjustment Disable certain functions within the system Show outer edge Show the outer edges of the image Test pattern Select test pattern Save to device Save parameters to permanent memory in the device Revert to saved Revert to settings stored in permanent memory in the device Update device Send parameters to device Red Switching on or off the red signal will cause the colour of the projected image to change . The command will apply to either one or several projectors depending on whether a single projector or a group of projectors has been selected in the hierarchical view . Green Switching on or off the green signal will cause the colour of the projected image to change . 3 - 19
Page: 46
3D perception CompactControl and CompactDesigner G00047 User Manual The command will apply to either one or several projectors depending on whether a single projector or a group of projectors has been selected in the hierarchical view . . Blue Switching on or off the blue signal will cause the colour of the projected image to change . The command will apply to either one or several projectors depending on whether a single projector or a group of projectors has been selected in the hierarchical view . Disable Adjustment Locate the mouse on Disable adjustment and a second pop - up menu will appear with the following options for disablement : • Geometry • Edge • Colour • Gamma • Mask • Scaling • Stereo • Output Dithering To disable one of the options simply click on it . Options that have been disabled will be indicated with a tick mark . To re - enable a function click on it and the tick mark will disappear . The command will apply to either one or several projectors depending on whether a single projector or a group of projectors has been selected in the hierarchical view . Shortcut Toolbar : Keys : N / A Show Outer Edge Shows the outer edge of the image in purple . This enables you to visualise the area not in use due to geometry adjustments . Note that edge blending may blend out the outer edge marking , soft edges are not disabled in this area . 3 - 20
Page: 47
3D perception CompactControl and CompactDesigner G00047 User Manual The command will apply to either one or several projectors depending on whether a single projector or a group of projectors has been selected in the hierarchical view . Shortcut Toolbar : N / A Keys : Test Pattern Test patterns are used to assist with the setting up and aligning of projectors . Before being able to use the test pattern facility an image generator must first be connected to the system . For full details of Test Patterns see chapter Toolbars - Test Patterns . For full details of setting up the system with image generators see chapter System Set - Up . Save to device This command saves the current settings from the RAM storage area of the device ( projector or the CompactUTM processor ) into the permanent Flash memory . This will ensure current settings may be saved in order that the next time the device is switched back on it will come back with those same settings . Revert to Saved This command reloads the settings from the device’s permanent Flash memory , and reverts to those settings . The command will apply to either one or several devices depending on whether a single device or a group of devices has been selected in the hierarchical view . 3 - 21
Page: 48
3D perception CompactControl and CompactDesigner G00047 User Manual Update device This commands sends the parameters from the CompactDesigner / CompactControl program to the RAM storage area of the device ( projector or the CompactUTM processor ) . Normally , it is not necessary to use this command , since parameters are updated automatically when changes are done in the program . However , if the device was switched on or reset after the program was started and the file was loaded , it may be necessary to send parameters to the device again . NOTE : To save parameters to the permanent Flash memory of the device you must use Save to Device . Tools The Tools menu offers the following options : Collision detect NOTE : Collision Detect is only available in CompactDesigner For full details see Chapter – Collision Detect Scenario Manager NOTE : Scenario Manager will only be active after a Scenario has been added For full details see Chapter - Scenario Manager 3 - 22
Page: 49
3D perception CompactControl and CompactDesigner G00047 User Manual Communication status The Communication status page contains the following data for all Projectors , CompactUTM processors , Image sources and Multi channel managers Name Address Status update Software version Timeout count Last timeout Chain address Analyze Signal NOTE : Analyse Signal will only be active if a CompactUTM processor exists within the selected channel For full details see Chapter - Analyse signal Colour Calibration This feature allows for the comparable calibration of colours across all channels . NOTES : 1 . Colour Calibration requires the extra software module Compact ColourMatcher . 2 . Prior to being able to use the facilities of colour calibration you will require a Minolta CS - 100A or similar type hardware . For full details of Colour Calibration see Chapter - Colour calibration Auto Calibrate For full details see Chapter – Auto Calibration 3 - 23
Page: 50
3D perception CompactControl and CompactDesigner G00047 User Manual View Menu The View menu offers the following commands : Toolbar Show or hide the various toolbars . Status Bar Show or hide the status bar . Tree / Properties view Show or hide the hierarchical tree and dialogue boxes . Toolbars Use this command to display and hide any of the available toolbars , which includes buttons for some of the most common commands in the system , such as File Open . A check mark appears next to the menu item when the Toolbar is displayed . Main Display / hide Main toolbar Create item Display / hide Create item toolbar Disable adjustment Display / hide Disable adjustment toolbar Test patterns Display / hide Test patterns toolbar Scenario Display / Hide Scenario toolbar Status Bar Use this command to display and hide the Status Bar , which describes the action to be executed by the selected menu item or depressed toolbar button , and keyboard latch state . A check mark appears next to the menu item when the Status Bar is displayed . The status bar is displayed at the bottom of the system window . Tree / Properties view Use this command to view or hide the hierarchical tree from the various views . To view or hide must be done for each individual view i.e . • 3D View • 2D Diagram • Coverage Diagram • Resolution Plot • Luminance Plot 3 - 24
Page: 51
3D perception CompactControl and CompactDesigner G00047 User Manual Window Menu The Window menu offers the following commands , which among other things enables you to arrange multiple views of multiple theatres in the application window : New 3D drawing Creates a new 3D View of the selected theatre New 2D drawing Creates a new 2D drawing of the selected theatre Creates a new Coverage Diagram of the selected theatre New Coverage Diagram New Plot Creates a new Resolution Plot of the selected theatre New Report View Creates a report of the selected theatre Cascade Arranges windows in an overlapped fashion . Tile Arranges windows in non - overlapped tiles . Arrange Icons Arranges icons of closed windows . 1,2 . . commands Switch between multiple open theatres . New 3D View Use this command to open a new window with the same contents as the active window . You can open multiple theatre windows to display different parts or views of a theatre at the same time . If you change the contents in one window , all other windows containing the same theatre reflect those changes . When you open a new window , it becomes the active window and is displayed on top of all other open windows . New 2D View Use this command to open a 2D drawing with the same contents as the active window . When you open a 2D drawing , it becomes the active window and is displayed on top of all other open windows . NOTE : If you change the contents in one window , all other windows referencing the same theatre reflect those changes � For details of functions within the 2D drawing see chapter Inside 2D View 3 - 25
Page: 52
3D perception CompactControl and CompactDesigner G00047 User Manual 2D drawing example New Coverage Diagram command Use this command to create a new coverage diagram . Coverage views , or diagrams , are provided to analyse field of view as seen from the eye point . A coverage view will show the field of view as seen from a given eye point , in azimuth and elevation . NOTE : If you change the contents in one window , all other windows referencing the same theatre reflect those changes . � For details of functions within the Coverage View diagram see chapter Inside Coverage Diagram New coverage diagram example 3 - 26
Page: 53
3D perception CompactControl and CompactDesigner G00047 User Manual New Plot From the drop - down menu select to create either a new resolution plot or a new Luminance plot . The resolution plot enables you to analyze the resolution either on screen or as seen from the eye point . The luminance plot enables you to analyze the amount of light on the screen ( illuminance ) , or the amount of light reflected back to the eye point ( luminance ) . NOTE : A luminance plot is not applicable when using rear projection � For details of functions within the Resolution plot see Chapter Resolution Plot � For details of functions within the Luminance plot see Chapter Luminance Plot Resolution plot example 3 - 27
Page: 54
3D perception CompactControl and CompactDesigner G00047 User Manual Luminance plot example NOTE : A luminance plot is not applicable to rear projection New Report View ( CompactDesigner only ) This command will generate a detailed report of the currently selected theatre . For full details of the report see chapter Report Cascade command Use this command to arrange multiple opened windows in an overlapped fashion . 3 - 28
Page: 55
3D perception CompactControl and CompactDesigner G00047 User Manual Tile command Use this command to arrange multiple opened windows in a non - overlapped fashion . 3 - 29
Page: 56
3D perception CompactControl and CompactDesigner G00047 User Manual Arrange Icons command Use this command to arrange the icons for minimised windows at the bottom of the main window . If there is an open theatre window at the bottom of the main window , then some or all of the icons may not be visible because they will be underneath this theatre window . 1,2,3 , etc The system displays a list of currently open theatre windows at the bottom of the Window menu . A check mark appears in front of the theatre name of the active window . Choose a theatre from this list to make its window active . Help Menu The Help menu offers the following commands , which provide you with assistance for this application : Help Topics A complete Help system with various means of searches . About CompactDesigner Displays the version number of this application . Technical support To be developed 3D Perception on the Web Go direct to 3D Perception’s home page on the web Help Topics The Help system has three primary means of searching for topics to assist the user : Contents Index Search 3 - 30
Page: 57
3D perception CompactControl and CompactDesigner G00047 User Manual Contents Use the Contents search the same as looking through the contents of an ordinary book . Index Use the alphabetical Index to find a word or phrase that has been highlighted for your ease of reference . 3 - 31
Page: 58
3D perception CompactControl and CompactDesigner G00047 User Manual Search Use the Search to find specific words and phrases in any of the help topics instead of searching for information by category . 3 - 32
Page: 59
3D perception CompactControl and CompactDesigner G00047 User Manual About CompactDesigner This command will display the About CompactDesigner information box . Technical support This option will take you directly to the Technical Support section on 3D Perceptions Web Site . 3D Perception on the Web This option will take you direct to 3D Perceptions home page on the World Wide Web . 3 - 33
Page: 60
3D perception CompactControl and CompactDesigner G00047 User Manual 4 . TOOLBARS The different toolbars can be switched ON and OFF from the Command bar under View . A check mark next to the menu item indicates that the Toolbar is displayed . Main Display / hide Main toolbar Create item Display / hide Create item toolbar Disable adjustment Display / hide Disable adjustment toolbar Test patterns Display / hide Test patterns toolbar Scenario Display / Hide Scenario toolbar Main toolbar The toolbar is displayed across the top of the application window , below the menu bar . The toolbar provides quick mouse access to many tools found in the Add and Edit command menus New Creates a new document Open an existing document . The system displays the Open dialogue box , in which you can locate and open the desired file . Save the active document or template with its current name . If you have not named the document , the system displays the Save As dialogue box . Print the active document . ( CompactDesigner only ) Save to projector saves all correction settings to the projectors . Revert to the last saved parameters for the projectors Communication status displays the current status of the projectors Cut selected data from the document and store it on the clipboard . Copy the selection to the clipboard . Paste the contents of the clipboard at the insertion point . Undo the last editing operation . Note : Not all actions can be undone . Redo re - apply previous editing operation About displays the CompactDesigner information box What's this ? to get specific help on the topic under the cursor 4 - 1