|Home |||Register Login |||Wanted Manuals |||MarketPlace |||Members Area |||Manuals Manufacturer Directory |||UPC Lookup |||Information Pages |||Policy|
The Search Results for the Search Section to the left will appear here.
User's manual 5.8 GHz Expansion Handset EP590 - 3 For use withAT & T model EP5995 CANCEL FLASH
Congratulations on your purchase of this AT & T product . Before using this telephone system , you must read Important safety information on pages 19 - 23 of this manual . NEED HELP ? Our representatives are here to help you with any questions concerning the operation of this product , available accessories , or any other related issues . Call toll free 1 ( 800 ) 222 - 3111 In Canada , call 1 ( 866 ) 288 - 4268 or visit our website at www.telephones.att.com Model no . : AT & T EP590 - Product name : 5.8 GHz cordless telephone Serial no . : SN : ( found at the bottom of the charger ) Purchase date : Place of purchase :
IMPORTANT Information about caller ID with call waiting This product has a caller ID with call waiting feature that works with service from your local telephone service provider . Caller ID with call waiting lets you see the name of the caller before answering the phone , even when youâ€™re on another call . You may need to change your telephone service to use this feature . Contact your telephone service provider if : â€¢ You have both caller ID and call waiting , but as separate services ( you may need combined service ) . â€¢ You have only caller ID service , or only call waiting service . â€¢ You donâ€™t subscribe to any caller ID or call waiting services . You can use this product with regular caller ID service , or you can use this productâ€™s other features without subscribing to either caller ID or combined caller ID with call waiting service . There are fees for caller ID services , and they may not be available in all areas . Depending on your service subscription , you may see the callerâ€™s number , or the callerâ€™s name and number . This product can provide information only if both you and the caller are in areas offering caller ID service , and if both telephone companies use compatible equipment . The time and date are sent by the service provider along with the call information . Copyright Â© 006 Advanced American Telephones.All rights reserved . AT & T and the Globe Design are trademarks of AT & T Corp . , licensed to Advanced American Telephones .
You must charge the See page 4 STOP ! battery pack before use . for easy instructions . For customer service or product information , visit our website at www.telephones.att.com or call 1 ( 800 ) 222 - 3111 . In Canada , call 1 ( 866 ) 288 - 4268 . Table of contents Quick reference guide . . . . . . . . . . . . . . . . . . . . . . . . Before you begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Parts checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Battery installation & charging . . . . . . . . . Adding new handsets . . . . . . . . . . . . . . . . . . . . . . . . . . 5 To replace a handset . . . . . . . . . . . . . . . . . . . . . . . . . . . Belt clip & optional headset . . . . . . . . . . . . . . 9 In case of difficulty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0 Important safety information . . . . . . . . . . 9 FCC Part 68 and ACTA . . . . . . . . . . . . . . . . . . . FCC Part 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Limited warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Quick reference guide For complete instructions , please refer to the manual provided with AT & T EP5995 cordless telephone / speakerphone answering system . If your manual for model EP5995 has been misplaced , you may download it from www.telephones.att.com . STATUS LIGHT / OFF / CANCEL Blinks to indicate there are new voicemail and / or new memo . During a call , press to hang up . While using menus , press to SOFTKEYS cancel an operation , back up to the previous menu , or exit the Press a softkey to select a menu menu display . item displayed just above the key . NavKey / PHONE / FLASH Press the CENTER NavKey Press to make and answer a call . to display menus . During a call , press to receive an CANCEL FLASH Press the UP or DOWN NavKey incoming call , if call waiting is activated . or to navigate through menus . See page 2 in this / SPEAKER userâ€™s manual for menu screen examples . Press to activate the handset speakerphone . Press the CENTER NavKey to select highlighted menu item . Press again to resume normal handset use . CENTER UP / ANSWERING SYSTEM LEFT RIGHT Press to show the number of old and new messages recorded on the DOWN answering system .
Quick reference guide Main menu Directory Settings Alice Set Time Directory Settings Amy Edit Handset Name Chris Deborah Show Handset Name Jenny Language Kristen Contrast FIND NEW Call Log Sounds Alice Ringer mVolumee Ringer Volu Call Log Sounds 0 - 888 - 883 - 2445 Ringer Melody Jan 9 10 : 39AM Record Ringer Keypad Tone SAVE DELETE Messages Pictures ePicturess Messages Pictur 0 New Messages 10 Old Messages SET PLAY DELETE Animations Messages 7 Memo Animations Jan 10 10 : 51AM Duration 0 : 11 REPEAT SKIP SET STOP DELETE Intercom Global Page Intercom BASE
Before you begin This cordless telephone not connect well when you operates with the maximum press / PHONE / FLASH . Move power allowed by the closer to the telephone Federal Communications base , then press / PHONE / Commission ( FCC ) . Even so , FLASH to answer the call . the handset and telephone If the handset is out of base can communicate over range during a phone only a certain distance conversation , there might â€” which can vary with the be interference . To improve locations of the telephone reception , move it closer to base and handset , the the telephone base . weather , and the layout of When you move out of your home or office . range without pressing If you receive a call while / OFF / CANCEL , the telephone you are out of range , the will be disconnected after handset might not ring â€” or five seconds . if it does ring , the call might Parts checklist Remember to save your sales receipt and original packaging in case you ever need to ship your telephone for warranty service . Check to make sure the telephone package includes the following : Power Telephone adapter handset Belt clip CANCEL FLASH Charger Battery compartment Battery pack cover
Battery installation & charging After installation , place the handset in the charger or the telephone base and allow the battery pack to charge for at least 6 hours before use.You can keep the battery pack charged by returning the handset to the charger or the telephone base after use . When battery power is fully depleted , a full recharge takes about 6 hours . Low battery indicator Return handset to telephone base or charger Insert supplied bat - to recharge when this symbol flashes . tery as indicated . ( Handset will beep when battery is low . ) The top edge ( with contacts and tab ) needs to be inserted 12 : 00AM first , then push down HANDSET 2 on the lower portion . 1 Low Battery REDIAL CALLER ID 2 Caution : Use only supplied rechargeable battery or AT & T replacement battery model 103 ( SKU 00249 . Plug power cord into jack Part Number 89 - 0429 - on underside of charger , 00 - 00 ) . then plug power adapter into electrical outlet . Replace compartment cover . NOTE : When fully charged , the battery in the handset can provide Place handset in charger to 5 hours of talk time or 3 charge for at least 16 hours days of standby time ( when before first use . idle ) . CANCEL FLASH CHARGE light remains on while charging . 5
Adding new handsets The AT & T EP5995 cordless telephone / speakerphone answering system can accommodate up to eight cordless handsets . You can add new handset ( AT & T model EP590 - , purchased separately ) anytime . Up to three handsets can be on a call at the same time . The handset provided with your telephone 12 : 00AM system is automatically registered as Register handset : Handset . Additional handsets will be assigned in numerical order ( , , , etc . ) Press the MENU key on the base . Find when they are registered . ' Register Handset ' in menu . Press SELECT . Before using a separately purchased handset , it must be registered with the telephone base . Put the new handset on the telephone base or a handset charger . 12 : 00AM Press SELECT / MENU at the telephone base , Registration followed by ^ DIR once and the screen will in progress . . . show Register Handset . Press SELECT / MENU on the telephone base to confirm . When the handset has synchronized with the telephone base , the screen on the handset will show Registration in progress . When the handset is successfully registered to the telephone base , the telephone base will generate a confirmation tone.The newly registered handset will be assigned the lowest extension number which has not previously been assigned to another system handset ( - 8 ) . The new handset will sound a confirmation tone . 5
Adding new handsets If the screen on the telephone base shows Registration failed , an error tone will sound . Try again . CANCEL CANCEL CANCEL FLASH FLASH FLASH Handset 1 Telephone base Handset 2 Handset 3 CANCEL CANCEL CANCEL CANCEL CANCEL FLASH FLASH FLASH FLASH FLASH Handset 4 Handset 5 Handset 6 Handset 7 Handset 8 NOTE : The maximum number of handsets in use at any time is three , and the possible combinations include : â€¢ Three handsets and the base on an external call . â€¢ Two handsets and the base on an external call , and one handset accessing the answering system . â€¢ One handset and the base are on an external call , and two handsets are on intercom . NOTE : The new handset will be assigned the next available handset number . A maximum of eight handsets can be registered to each telephone base . 6
To replace a handset If you are replacing a handset on a system that has the maximum number of registered handsets ( eight ) or wish to change the assigned handset number of your registered handsets , you must first de - register the handsets , and then re - register all handsets again . NOTE : A handset must be de - registered , with NOT REGISTERED shown on the handset screen , before it can be registered to another telephone base . To de - register a handset â€¢ Press the CENTER NavKey on the handset to bring up main menu . â€¢ Press the UP or DOWN NavKey or four times for settings . â€¢ Press the CENTER NavKey to enter into settings menu . â€¢ Press the UP NavKey once or DOWN NavKey seven times to select delete registration . â€¢ Press the CENTER NavKey and you will be prompted to select YES / NO for handset de - registration . â€¢ Press the softkey YES to proceed with de - registration or NO to cancel . â€¢ After pressing the softkey YES , the screen will remain blank for a while . â€¢ When the screen shows Not Registered , the de - registration process is complete . There will not be a confirmation tone . 6
To replace a handset To de - register all handsets â€¢ Press SELECT / MENU . â€¢ Press V CID twice to the base settings option . â€¢ Press SELECT / MENU . â€¢ Press ^ DIR once . â€¢ Menu shows Delete Handsets , Press SELECT / MENU . â€¢ Display shows Del Registration of all handsets . â€¢ Press SELECT / MENU to confirm . To re - register a handset You can re - register handsets after de - registering them swfrome the telephone base , or you can re - register them to a ane telephone base if you have replaced your telephone b for any reason . â€¢ Make sure your handset battery pack is properly installed and charged . â€¢ The screen on the handset will initially show Not Registered . â€¢ Put the handset in the telephone base or a handset charger . â€¢ Press SELECT / MENU on the telephone base to bring up the main menu . â€¢ On the base unit , press ^ DIR once and the screen will show Register Handset . â€¢ Press SELECT / MENU to confirm and the screen on theaistered telephone base will show Registering Handset . Aftereg brief moment , the handset will show Handset X r and you will hear a confirmation tone ( where Xthe represents the handset just registered ) when entire process is complete . 8 9
Belt clip & optional headset Install belt clip as shown below if desired . For hands - free telephone conversations , use any industry standard . 5 mm headset ( purchased separately ) . For best result , use an AT & T . 5 mm headset . Snap belt clip into notches on side of handset . Rotate and pull to remove . Plug 2.5 mm headset into jack on side of handset CANCEL FLASH ( beneath small rubber cap ) . 8 9
In case of difficulty If you have difficulty with your phone , please try the suggestions below . For Customer Service , visit our web site at www.telephones.att.com , or call ( 800 ) â€“ ; in Canada , call ( 866 ) 88 - 68 . â€¢ Make sure the battery pack is installed and My telephone charged correctly . For optimum daily perfor - does not work mance , return the cordless handset to the at all . telephone base after use . â€¢ Make sure the power adapter is securely plugged into an outlet not controlled by a wall switch . â€¢ Make sure the telephone line cord is plugged firmly into the base unit and the modular wall jack . â€¢ Reset the telephone base . Unplug the unitâ€™s electrical power . Wait for approximately 15 seconds , then plug it back in . Allow up to one minute for the cordless handset and base to reset . â€¢ Remove and re - insert the battery pack . If that still does not work , it may be necessary to purchase a new battery pack . â€¢ Place the handset in the base or charger for Low Battery is recharging . displayed on screen . â€¢ Remove and re - install the battery pack and use it normally until fully discharged , then recharge the handset on the base or charger for 16 hours . â€¢ If the above measures do not correct the problem , the battery pack may need to be replaced . 0
In case of difficulty â€¢ Make sure the handset is placed in the char - The battery ger correctly . The CHARGE light on the char - does not ger should be on . charge in the â€¢ Remove the battery from the handset and handset or install it in the spare battery compartment the handset on the side of the telephone base and let battery does it charge for 16 hours . Then re - install the not accept charged battery pack into the handset . charge . â€¢ If the cordless handset is in the charger or in the telephone base but the CHARGE light is not on , refer to â€œ The charge light is off â€� in this section . â€¢ It may be necessary to purchase a new bat - tery . Please refer to the batteries section of this userâ€™s manual . â€¢ The telephone might be malfunctioning . Please refer to the Warranty section of this userâ€™s manual for further instruction . â€¢ Clean the charging contacts on the cordless The CHARGE handset ( s ) and telephone base each month light is off . using a pencil eraser or a dry non - abrasive fabric . â€¢ Make sure the power adapter and telephone line cords are plugged in correctly and secure - ly . â€¢ Unplug the power adapter . Wait for 15 sec - onds before plugging it back in . Allow up to one minute for the cordless handset and tele - phone base to reset . â€¢ The telephone might be malfunctioning . Please refer to the Warranty section of this userâ€™s manual for further instruction . 0
In case of difficulty â€¢ First , try all the above suggestions . There is no dial tone . â€¢ Move the cordless handset closer to the tele - phone base . It might be out of range . â€¢ The telephone line cord might be malfunction - ing . Try installing a new telephone line cord . â€¢ Disconnect the base unit from the telephone jack and connect a different telephone . If there is no dial tone on the telephone either , the problem is in your wiring or local service . Contact your local telephone company . â€¢ Make sure the ringer is on . The telephone does not ring â€¢ Make sure the telephone line cord and power when there is adapter are plugged in properly . an incoming â€¢ The cordless handset may be too far from the call . telephone base . Move it closer to the tele - phone base . â€¢ There may be too many extension phones on the telephone line to allow all of them to ring simultaneously . Try unplugging some of them . â€¢ If the other telephones in your home are hav - ing the same problem , the problem is in the wiring or local service . Contact the local tele - phone company ( charges may apply ) . â€¢ Other electronic products can cause interfer - ence to your cordless telephone . Try installing your telephone as far away as possible from the following electronic devices : wireless rout - ers , radios , radio towers , pager towers , cel - lular telephones , digital telephones , intercoms , room monitors , televisions , VCRs , personal computers , kitchen appliances , and other cordless telephones . â€¢ Test a working telephone at the telephone jack . If another telephone hast he same
In case of difficulty prob lem , the problem is in the telephone jack . Contact your local telephone company ( charg - es may apply ) . â€¢ The telephone line cord might be malfunction - ing . Try installing a new telephone line cord . â€¢ Re - install the battery pack and place the cord - less handset in the telephone base . â€¢ Wait for the cordless handset to synchronize with the telephone base . To be safe , allow up to one minute for this to take place . â€¢ Make sure there is a dial tone before dialing . It I cannot dial is normal if the cordless handset takes a sec - out . ond or two to synchronize with the telephone before producing a dial tone . Wait an extra second before dialing . â€¢ Makes sure the telephone is set to the correct dial mode ( pulse dial or tone dial ) for the ser - vice in your area . Refer to the Setup section of this userâ€™s manual to set the dial mode . â€¢ If the other telephones in your home are hav - ing the same problem , the problem is in the wiring or local service . Contact your local tele - phone company ( charges may apply ) . â€¢ Eliminate any background noise . Noise from a television , radio , or other appliances may cause the telephone to not dial out properly . If you cannot eliminate the background noise , first try muting the cordless handset before dialing , or dialing from another room in your home with less background noise .
In case of difficulty â€¢ The handset may be out of range . Move it There is closer to the telephone base . noise or interference â€¢ Appliances or other cordless telephones plugged into the same circuit as the telephone during a base can cause interference . Try moving the telephone appliance or telephone base to another outlet . conversation . â€¢ Other electronic products can cause interfer - ence to your cordless telephone . Try installing My calls fade your telephone as far away as possible from out or cut in the following electronic devices : wireless rout - and out when ers , radios , radio towers , pager towers , cellu - I am using lar telephones , digital telephones , intercoms , room monitors , televisions , VCRs , personal the cordless computers , kitchen appliances , and other handset . cordless telephones . â€¢ Microwave ovens operate on the same fre - quency as your telephone . It is normal to experience static on your telephone while the microwave oven is operating . Do not install this telephone in the same outlet or near a microwave oven . â€¢ If your telephone is plugged in with a modem or a surge protector , plug the telephone ( or a - modem / surge protector ) into a different loc tion . If this solves the problem , re - locate your telephone or modem farther apart from each other , or use a different surge protector . â€¢ The layout of your home or office might be limiting the operating range . Trying moving the base to another location , preferably a higher location for better reception . â€¢ Disconnect the telephone base from the mod - ular jack and plug in a corded telephone . If calls are still not clear , the problem is probably in the wiring or local service . Contact your local service company ( charges may apply ) . â€¢ Do you have DSL service ? If yes , you need to have a DSL filter installed at every telephone 5
In case of difficulty jack that has a telephone connected to it . Contact your DSL service provider for filter information . â€¢ Disconnect the telephone base from the tele - I hear other phone jack . Plug in a different telephone . If calls when you still hear other calls , the problem is prob - using the ably in the wiring or local service . Call your telephone . local telephone company . â€¢ Make sure the telephone line cord is plugged I hear noise in in securely . the cordless handset , and none of the keys or buttons work . â€¢ Caller ID is a subscription service . You must My caller ID subscribe to this service from your local tele - features are phone company for this feature to work on not working your telephone . properly . â€¢ The caller may not be calling from an area which supports caller ID . â€¢ Both you and the callerâ€™s telephone compa - nies must use equipment which are compat - ible with caller ID service . â€¢ If you subscribe to DSL service , install a noise filter to the telephone line between the base unit and the telephone line jack . Contact your DSL service provider for filter information . 5
In case of difficulty â€¢ Make sure you subscribe to Caller ID with Call The system Waiting features services provided by the local does not telephone company . receive caller â€¢ The caller may not be calling from an area ID or the which supports caller ID . system does not display â€¢ Both you and the callerâ€™s telephone compa - nies must use equipment which are compat - caller ID ible with caller ID service . during call â€¢ If you subscribe to DSL service , install a noise waiting . filter to the telephone line between the base unit and the telephone line jack . Contact your DSL service provider for filter information . â€¢ Make sure the answering system is on . When The answering the answering system is on , the red light on system does the ANSWER ON / OFF key should be lit . not answer â€¢ If Toll Saver is activated , the number of rings after the changes to two when there are new messages correct waiting . number of â€¢ If the memory is full or if the answering system rings . is off , the system will answer after ten rings . â€¢ In some cases , the answering system be affected by the ringing system used by the local telephone company . â€¢ When recording the announcement , make The sure you speak in a normal tone of voice announcement about nine inches from the telephone base . message is â€¢ Make sure there is no background noise ( tele - not clear . vision , music , traffic , etc . ) when recording . 6
In case of difficulty â€¢ Make sure the answering system is on . The answering system does â€¢ Make sure the Announcement Only feature is not record off . message . â€¢ If a caller leaves a very long message , part of The messages it may be lost when the system disconnects on the the call after four minutes . answering â€¢ If the caller pauses for more than 7 seconds , system are the system stops recording and disconnects incomplete . the call . â€¢ If the memory on the system becomes full during a message , the system stops recording and disconnects the call . â€¢ If the callerâ€™s voice is very soft , the system may stop recording and disconnect the call . â€¢ Press / VOLUME on the side of the handset or The messages on the telephone base to increase the speaker on the system volume . are very difficult to hear . â€¢ Make sure your Remote Access Code is cor - The answering rect . system does â€¢ Make sure you are calling from a touch - tone not respond telephone . When dialing a number , you should to remote hear tones . If you hear clicks , then it is not a commands . touch - tone telephone and cannot activate the answering system . â€¢ The answering system may not detect the e - Remote Access Code when your announc ment is playing . Wait until the announcement 6
In case of difficulty is over before entering the code . â€¢ There may be interference on the telephone line you are using . Press the dial pad keys firmly when dialing . â€¢ If the unit is not responding normally , trying Common cure putting the cordless handset in the telephone for electronic base or the charger . If it does not seem to equipment . respond , try the following ( in the order listed ) : â€¢ Disconnect the power to the telephone base . â€¢ Disconnect the battery on the cordless hand - set and the spare battery in the telephone base . â€¢ Wait a few minutes before connecting power to the telephone base . â€¢ Re - install the battery pack and place the cord - less handset into the telephone base or char - ger . â€¢ Wait for the cordless handset to synchronize its connection with the telephone base . To be safe , allow up to one minute for this to take place . 8 9
Important safety information This symbol alerts you to important operating or servicing instructions that may appear in this userâ€™s manual . Always follow basic safety precautions when using this product to reduce the risk of injury , fire , or electric shock . Safety information â€¢ Read and understand all instructions in the userâ€™s manual . Observe all markings on the product . CAUTION : To reduce the risk of fire or injury to per - sons or damage to the telephone , read and follow these instructions carefully : â€¢ Use only supplied rechargeable battery ( model 0 ) or AT & T replacement battery ( model 0 ) . â€¢ Do not dispose of the battery in a fire ; it could explode . Check with local codes for special disposal instructions . Do not open or mutilate the battery . Released electro - â€¢ lyte is corrosive and may cause damage to the eyes or skin . It may be toxic if swallowed . Exercise care in handling batteries in order not to create â€¢ a short circuit with conductive materials such as rings , bracelets , and keys.The battery or conductor may over - heat and cause harm . â€¢ Charge the battery provided with or identified for use with this product only in accordance with the instruc - tions and limitations specified in this manual . â€¢ Observe proper polarity orientation between the battery and battery charger . â€¢ Avoid using a telephone during a thunderstorm . There may be a slight chance of electric shock from lightning . 8 9
Important safety information â€¢ Do not use a telephone in the vicinity of a gas leak . If you suspect a gas leak , report it immediately , but use a telephone away from the area where gas is leaking . If this product is a cordless model , make sure the telephone base is also away from the area . â€¢ Do not use this product near water , or when you are wet . For example , do not use it in a wet basement or shower , or next to a swimming pool , bathtub , kitchen sink , or laundry tub . Do not use liquids or aerosol sprays for cleaning . If the product comes in contact with any liquids , unplug any line or power cord immediately . Do not plug the product back in until it has dried thoroughly . â€¢ Install this product in a protected location where no one can trip over any line or power cords . Protect cords from damage or abrasion . â€¢ If this product does not operate normally , read in case of difficulty ( pages 10 - 18 ) in the userâ€™s manual . If you cannot solve the problem , or if the product is damaged , refer to the limited warranty ( pages 8 - ) . Do not open this product except as may be directed in your userâ€™s manual . Opening the product or reassembling it incorrectly may expose you to hazardous voltages or other risks . â€¢ Replace batteries only as described in your userâ€™s manual . Do not burn or puncture batteries â€” they contain caustic chemicals . CAUTION : Use only the power adapter provided with this product . To obtain a replacement , call 1 ( 800 ) 222 â€“ 3111 . 0
Important safety information Especially about cordless telephones â€¢ Privacy : The same features that make a cordless telephone convenient create some limitations . Telephone calls are transmitted between the telephone base and the handset by radio waves , so there is a possibility that your cordless telephone conversations could be intercepted by radio receiving equipment within range of the cordless handset . For this reason , you should not think of cordless telephone conversations as being as private as those on corded phones . â€¢ Electrical power : The telephone base of this cordless telephone must be connected to a working electrical outlet . The electrical outlet should not be controlled by a wall switch . Calls cannot be made from the handset if the telephone base is unplugged or switched off , or if the electrical power is interrupted . â€¢ Potential TV interference : Some cordless telephones operate at frequencies that may cause interference to TVs and VCRs.To minimize or prevent such interference , do not place the telephone base of the cordless telephone near or on top of a TV or VCR . If interference is experienced , moving the cordless telephone farther away from the TV or VCR will often reduce or eliminate the interference . â€¢ Rechargeable batteries : This product contains either nickel - cadmium or nickel - metal hydride rechargeable batteries . Exercise care in handling batteries in order not to create a short circuit with conductive material such as rings , bracelets , and keys . The battery or conductor may overheat and cause harm . Observe proper polarity between the battery and the battery charger . 0
Important safety information â€¢ Nickel - cadmium rechargeable batteries : Must be recycled or disposed of properly . Do not dispose of them in household garbage . Do not burn or puncture . Like other batteries of this type , if burned or punctured , they could release caustic material which could cause injury . â„¢ The RBRC Seal means that the manufacturer is voluntarily participating in an industry program to collect and recycle nickel - cadmium rechargeable batteries when taken out of service within the United States . These batteries may be taken to a participating local retailer of replacement batteries or recycling center . Or you may call 1 - 800 - 8 - BATTERY for locations accepting spent nickel - cadmium batteries . Precautions for users of implanted cardiac pacemakers Cardiac pacemakers ( applies only to digital cordless telephones ) : Wireless Technology Research , LLC ( WTR ) , an independent research entity , led a multidisciplinary evaluation of the interference between portable wireless telephones and implanted cardiac pacemakers . Supported by the U.S . Food and Drug Administration , WTR recommends to physicians that : PACEMAKER PATIENTS â€¢ Should keep wireless telephones at least six inches from the pacemaker . â€¢ Should NOT place wireless telephones directly over the pacemaker , such as in a breast pocket , when it is turned ON . â€¢ Should use the wireless telephone at the ear opposite the pacemaker .
Important safety information WTRâ€™s evaluation did not identify any risk to bystanders with pacemakers from other persons using wireless telephones . Especially about telephone answering systems Two - way recording : This unit does not sound warning beeps to let the other party know that the call is being recorded.To ensure that you are in compliance with any federal or state regulations regarding recording a telephone call , you should start the recording process and then inform the other party that you are recording the conversation . SAVE THESE INSTRUCTIONS
FCC Part 68 and ACTA This equipment complies with Part 68 of the FCC rules and with technical requirements adopted by the Administrative Council for Terminal Attachments ( ACTA ) . The label on the back or bottom of this equipment contains , among other information , a product identifier in the format US:AAAEQ # # TXXXX.This identifier must be provided to your local telephone company upon request . The plug and jack used to connect this equipment to premises wiring and the telephone network must comply with the applicable Part 68 rules and technical requirements adopted by ACTA . A compliant telephone cord and modular plug is provided with this product . It is designed to be connected to a compatible modular jack that is also compliant . An RJ jack should normally be used for connecting to a single line and an RJ jack for two lines . See Installation Instructions in the userâ€™s manual . The Ringer Equivalence Number ( REN ) is used to determine the number of devices you may connect to your telephone line and still have them ring when you are called.The REN for this product is encoded as the 6th and th characters following the US : in the product identifier ( e.g . , if # # is 0 , the REN is 0 . ) . In most , but not all areas , the sum of all RENs should be five ( 5.0 ) or less . For more information , please contact your local telephone company . This equipment may not be used with Party Lines . If you have specially wired alarm dialing equipment connected to your telephone line , ensure the connection of this equipment does not disable your alarm equipment . If you have questions about what will disable alarm equipment , consult your telephone company or a qualified installer . 5
FCC Part 68 and ACTA If this equipment is malfunctioning , it must be unplugged from the modular jack until the problem has been corrected . Repairs to this telephone equipment can only be made by the manufacturer or its authorized agents . For repair procedures , follow the instructions outlined under the limited warranty . If this equipment is causing harm to the telephone network , the telephone company may temporarily discontinue your telephone service . The telephone company is required to notify you before interrupting service . If advance notice is not practical , you will be notified as soon as possible . You will be given the opportunity to correct the problem and the telephone company is required to inform you of your right to file a complaint with the FCC . Your telephone company may make changes in its facilities , equipment , operation , or procedures that could affect the proper functioning of this product . The telephone company is required to notify you if such changes are planned . If this product is equipped with a corded or cordless handset , it is hearing aid compatible . If this product has memory dialing locations , you may choose to store emergency telephone numbers ( e.g . , police , fire , medical ) in these locations . If you do store or test emergency numbers , please : â€¢ Remain on the line and briefly explain the reason for the call before hanging up . â€¢ Perform such activities in off - peak hours , such as early morning or late evening . 5
FCC Part 15 This equipment has been tested and found to comply with the requirements for a Class B digital device under Part 5 of the Federal Communications Commission ( FCC ) rules.These requirements are intended to provide reasonable protection against harmful interference in a residential installation . This equipment generates , uses and can radiate radio frequency energy and , if not installed and used in accordance with the instructions , may cause harmful interference to radio communications . However , there is no guarantee that interference will not occur in a particular installation . If this equipment does cause harmful interference to radio or television reception , which can be determined by turning the equipment off and on , the user is encouraged to try to correct the interference by one or more of the following measures : â€¢ Increase the distance between the equipment and receiver . â€¢ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected . â€¢ Consult the dealer or an experienced radio / TV technician for help . Changes or modifications to this equipment not expressly approved by the party responsible for compliance could void the userâ€™s authority to operate the equipment . To ensure safety of users , the FCC has established criteria for the amount of radio frequency energy that can be safely absorbed by a user or bystander according to the intended usage of the product.This product has been tested and found to comply with the FCC criteria . The handset may be safely held against the ear of the user . The telephone base shall be 6
FCC Part 15 installed and used such that parts of the userâ€™s body other than the hands are maintained at a distance of approximately 0 cm ( eight inches ) or more . If you choose to use a clipping device , please make sure to only use the supplied AT & T belt clip . 6
Limited warranty The AT & T brands are used under license . Any repair , replacement or warranty service , and all questions about this product should be directed to : Advanced American Telephones , ( 800 ) - or www.telephones.att.com . In Canada , call ( 866 ) 88 - 68 . . What does this limited warranty cover ? The manufacturer of this AT & T - branded product , Advanced American Telephones ( â€œ AAT â€� ) , warrants to the holder of a valid proof of purchase ( â€œ CONSUMER â€� or â€œ YOU â€� ) that the product and all accessories provided by AAT in the sales package ( â€œ PRODUCT â€� ) are free from material defects in material and workmanship , pursuant to the following terms and conditions , when installed and used normally and in accordance with operation instructions.This limited warranty extends only to the Consumer for Products purchased and used in the United States of America . . What will AAT do if the Product is not free from material defects in materials and workmanship during the limited warranty period ( â€œ MATERIALLY DEFECTIVE PRODUCT â€� ) ? During the limited warranty period , AATâ€™s authorized service representative will repair or replace , at AATâ€™s option , without charge , a Materially Defective Product . If AAT repairs this product , AAT may use new or refurbished replacement parts . If AAT chooses to replace this product , AAT may replace it with a new or refurbished product of the same or similar design . AAT will return repaired or replacement products to you in working condition . AAT will retain defective parts , modules , or equipment . Repair or replacement of Product , at AATâ€™s option , is 8 9
Limited warranty your exclusive remedy . You should expect the repair or replacement to take approximately 0 days . . How long is the limited warranty period ? The limited warranty period for the Product extends for ONE ( ) YEAR from the date of purchase . If AAT repairs or replaces a Materially Defective Product under the terms of this limited warranty , this limited warranty also applies to repaired or replacement Products for a period of either ( a ) 90 days from the date the repaired or replacement Product is shipped to you or ( b ) the time remaining on the original one - year limited warranty , whichever is longer . . What is not covered by this limited warranty ? This limited warranty does not cover : â€¢ Product that has been subjected to misuse , accident , shipping or other physical damage , improper installation , abnormal operation or handling , neglect , inundation , fire , water , or other liquid intrusion ; or â€¢ Product that has been damaged due to repair , alteration , or modification by anyone other than an authorized service representative of AAT ; or â€¢ Product to the extent that the problem experienced is caused by signal conditions , network reliability or cable or antenna systems ; or â€¢ Product to the extent that the problem is caused by use with non - AAT accessories ; or â€¢ Product whose warranty / quality stickers , product 8 9
Limited warranty serial number plates or electronic serial numbers have been removed , altered or rendered illegible ; or â€¢ Product purchased , used , serviced , or shipped for repair from outside the United States , or used for commercial or institutional purposes ( including but not limited to Products used for rental purposes ) ; or â€¢ Product returned without valid proof of purchase ( see 6 below ) ; or â€¢ charges for installation or setup , adjustment of customer controls , and installation or repair of systems outside the unit . 5 . How do you get warranty service ? To obtain warranty service in the United States of America , call ( 800 ) - for instructions regarding where to return the Product . Before calling for service , please check the userâ€™s manual . A check of the Product controls and features may save you a service call . Except as provided by applicable law , you assume the risk of loss or damage during transit and transportation and are responsible for delivery or handling charges incurred in the transport of Product ( s ) to the service location . AAT will return repaired or replaced Product under this limited warranty to you , transportation , delivery or handling charges prepaid . AAT assumes no risk for damage or loss of the Product in transit . If the Product failure is not covered by this limited warranty , or proof of purchase does not meet the terms of this limited warranty , AAT will notify you and will request that you authorize the cost of repair prior to any further 0
Limited warranty repair activity.You must pay for the cost of repair and return shipping costs for the repair of Products that are not covered by this limited warranty . 6 . What must you return with the Product to get warranty service ? You must : a return the entire original package and contents including the Product to the AAT service location along with a descrip - tion of the malfunction or difficulty ; b include â€œ valid proof of purchase â€� ( sales receipt ) identifying the Product purchased ( Product model ) and the date of purchase or receipt ( keep a copy for your records ) ; and c provide your name , complete and correct mailing address , and telephone number . . Other limitations This warranty is the complete and exclusive agreement between you and AAT . It supersedes all other written or oral communications related to this Product . AAT provides no other warranties for this product . The warranty exclusively describes all of AATâ€™s responsibilities regarding the product . There are no other express warranties . No one is authorized to make modifications to this limited warranty and you should not rely on any such modification . State Law Rights : This warranty gives you specific legal rights , and you may also have other rights which vary from state to state . Limitations : Implied warranties , including those of fitness for a 0
Limited warranty particular purpose and merchantability ( an unwritten warranty that the product is fit for ordinary use ) are limited to one year from date of purchase . Some states do not allow limitations on how long an implied warranty lasts , so the above limitation may not apply to you . In no event shall AAT be liable for any indirect , special , inci - dental , consequential , or similar damages ( including , but not limited to lost profits or revenue , inability to use the product , or other associated equipment , the cost of substitute equip - ment , and claims by third parties ) resulting from the use of this product . Some states do not allow the exclusion or limitation of inci - dental or consequential damages , so the above limitation or exclusion may not apply to you . Please retain your receipt as your proof of purchase .
www.telephones.att.com Copyright Â© 006 Advanced American Telephones . All rights reserved . AT & T and the Globe Design are trademarks of AT & T Corp . , licensed to Advanced American Telephones . Printed in China . Issue AT & T 0 / 06 . 9 - 000 - 0 0 - 000