Home | Manufacturer Directory | UPC Lookup | Wanted Manuals | Information Pages |
Register Login | Members Area |

Back To Craftsman Corded Drill       Model: 315.101300 or 315101300 Craftsman 3/8 in. Corded Drill Driver
Regular Text Search or Search by Model Number

Register / log-in to add to your Hammerwall Collection.
Manual Location


Upload a pic of this item

This a Craftsman 3/8 drill model number 315.101300.

Features:

  • 3/8 inch chuck
  • 0-1000 /min
  • 4.5amps

  • Manuals For Same Model Number.
    No other Manuals with the Exact Same Model Number and Manufacture.
    Other Items that are in the Same Category.
    315.271490 Craftsman Profession drill Manual...
    315.101210 Craftsman 3/8 in. Reversible Drill Manual...
    315.101220 Craftsman 3/8 in. Reversible Drill Manual...
    315.101230 Craftsman 3/8 in. Reversible Drill Manual...
    315.101030 Craftsman 3/8 in. Drill...
    315.101040 Craftsman 3/8 in. Drill...
    315.101050 Craftsman 3/8 in. Drill...
    315.279940 Craftsman Professional 3/8 in. corded Drill Dri...
    315.101300 Craftsman 3/8 in. Corded Drill Driver ...
    315.269390 Craftsman Professional 3/8 in. Electric Drill...

    This is a partial text extraction from the pdf, to download the pdf, click the Manual tab. If you want to search this text, hold control and F, and type the word you are looking for.

    Page: 1

    Owner's Manual ICRRFTSMI : IN [ 318 in . DRILL - DRIVER Variable Speed / Reversible Double Insulated Model No . 315.101300 Save this manual for • Safety future reference • Features • Operation , _ CAUTION : Read and follow • Maintenance all Safety Rules and • Parts List Operating Instructions before first use of this product . Customer Help Line : 1 - 800 - 932 - 3188 Sears Roebuck and Co . , Hoffman Estates , IL 60179 USA Visit the Craftsman web page : www . sears . com / craftsman 0 ( 0s 972000 - 871 4 - 01
    Page: 2

    TABLE OF CONTENTS • Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 • General Safety Rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 3 • Specific Safety Rules and / or Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 5 • Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 7 • Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 11 • Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 • Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 carry the tools or pull the plug from an outlet . _ 1 WARNING : Read and follow all instructions . Keep cord away from heat , oil , sharp edges , or Failure to follow all instructions listed below may moving pads . Replace damaged cords immedi - result in electric shock , fire and / or serious per - ately . Damaged cords increase the risk of electric sonal injury . shock . SAVE THESE INSTRUCTIONS When operating a power tool outside , use an outdoor extension cord marked " W - A " or " W " . Work Area These cords are rated for outdoor use and reduce • Keep your work area clean and well lit . Clut - the risk of electric shock . tered benches and dark areas invite accidents . Personal Safety Do not operate power tools in explosive atmospheres , such as in the presence of • Stay alert , watch what you are doing and use flammable liquids , gases , or dust . Power tools common sense when operating a power tool . Do not use tool while tired or under the influ - may create sparks which may ignite the dust or fumes . ence of drugs , alcohol , or medication . A mo - ment of inattention while operating power tools • Keep bystanders , children , and visitors away may result in serious personal injury . while operating a power tool . Distractions can • Dress properly . Do not wear loose clothing or cause you to lose control . jewelry . Contain long hair . Keep your hair , Electrical Safety clothing , and gloves away from moving parts . • Double insulated tools are equipped with a Loose clothes , jewelry , or long hair can be caught polarized plug ( one blade is wider than the in moving parts . other ) . This plug will fit in a polarized outlet • Avoid accidental starting . Be sure switch is off only one way . If the plug does not fit fully in the before plugging in . Carrying tools with your finger outlet , reverse the plug . If it still does not fit , on the switch or plugging in tools that have the contact a qualified electrician to install a switch on , invites accidents . polarized outlet . Do not change the plug in any Remove adjusting keys or wrenches before way . Double insulation [ ] eliminates the need for • turning the tool on . A wrench or a key that is left the three - wire grounded power cord and grounded attached to a rotating part of the tool may result in power supply system . personal injury . • Avoid body contact with grounded surfaces , Do not overreach . Keep proper footing and such as pipes , radiators , ranges , and refrigera - • tors . There is an increased risk of electric shock if balance at all times . Proper footing and balance enables better control of the tool in unexpected your body is grounded . situations . • Don't expose power tools to rain or wet condi - tions . Water entering a power tool will increase • Use safety equipment . Always wear eye protec - the risk of electric shock . tion . Dust mask , nonskid safety shoes , hard hat , or hearing protection must be used for appropriate • Do not abuse the cord . Never use the cord to conditions . 2
    Page: 3

    Tool Use and Care Check for misalignment or binding of moving parts , breakage of parts , and any other condi - • Use clamps or another practical way to secure tion that may affect the tool's operation . If and support the workpiece to a stable platform . damaged , have the tool serviced before using . Holding the work by hand or against your body is Many accidents are caused by poorly maintained unstable and may lead to loss of control . tools . • Do not force tool . Use the correct tool for your Use only accessories that are recommended application . The correct tool will do the job better by the manufacturer for your model . Accesso - and safer at the rate for which it is designed . ries that may be suitable for one tool , may become • Do not use tool if switch does not turn it on or hazardous when used on another tool . off . Any tool that cannot be controlled with the Service switch is dangerous and must be repaired , • Tool service must be performed only by quali - • Disconnect the plug from power source before fied repair personnel . Service or maintenance making any adjustments , changing accesso - performed by unqualified personnel could result in ries , or storing the tool . Such preventive safety a risk of injury . measures reduce the risk of starting the tool accidentally . • When servicing a tool , use only identical replacement parts . Follow instructions in the • Store idle tools out of the reach of children and Maintenance section of this manual . Use of other untrained persons . Tools are dangerous in unauthorized parts or failure to follow Maintenance the hands of untrained users . Instructions may create a risk of electric shock or • Maintain tools with care . Keep cutting tools injury . sharp and clean . Properly maintained tools with sharp cutting edges are less likely to bind and are easier to control . 3
    Page: 4

    Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may con - tact hidden wiring or its cord . Contact with a " live " wire will make exposed metal parts of the tool " live " and shock the operator . Additional Rules For Safe Operation Make sure your extension cord is in good condition . When using an extension cord , be Know your power tool . Read operator's manual sure to use one heavy enough to carry the carefully . Learn its applications and limitations , current your product will draw . A wire gage as well as the specific potential hazards related size ( A . W . G . ) of at least 16 is recommended for to this tool . Following this rule will reduce the risk an extension cord 100 feet or less in length . A of electric shock , fire , or serious injury . cord exceeding 100 feet is not recommended . Always wear safety glasses . Everyday eye - If in doubt , use the next heavier gage . The glasses have only impact - resistant lenses ; smaller the gage number , the heavier the cord . they are NOT safety glasses . Following this rule An undersized cord will cause a drop in line will reduce the risk of serious personal injury . voltage resulting in loss of power and overheating . • Protect your lungs . Wear a face or dust mask if Inspect for and remove all nails from lumber the operation is dusty . Following this rule will before drilling . Following this rule will reduce the reduce the risk of serious personal injury . risk of serious personal injury . Protect your hearing . Wear hearing protection Drugs , alcohol , medication . Do not operate tool during extended periods of operation . Following while under the influence of drugs , alcohol , or this rule will reduce the risk of serious personal any medication . Following this rule will reduce the injury . risk of electric shock , fire , or serious personal injury . Inspect tool cords periodically and , if dam - aged , have repaired at your nearest Factory Save these instructions . Refer to them # e - Service Center or other Authorized Service quently and use them to instruct others who Organization . Constantly stay aware of cord may use this tool . If you loan someone this location . Following this rule will reduce the risk of tool , loan them these instructions also . electric shock or fire . Check damaged parts . Before further use of _ LWARNING : Some dust created by power the tool , a guard or other part that is damaged sanding , sawing , grinding , drilling , and other construction activities contains chemicals known should be carefully checked to determine that it will operate properly and perform its in - to cause cancer , birth defects or other reproduc - tended function . Check for alignment of mov - tive harm . Some examples of these chemicals are : ing parts , binding of moving parts , breakage of parts , mounting , and any other conditions that • lead from lead - based paints , may affect its operation . A guard or other part • crystalline silica from bricks and cement that is damaged should be properly repaired or and other masonry products , and replaced by an authorized service center . • arsenic and chromium from chemically - Following this rule will reduce the risk of shock , treated lumber . fire , or serious injury . Your risk from these exposures varies , Do not abuse cord . Never carry the tool by the depending on how often you do this type of cord or yank it to disconnect it from the recep - work . To reduce your exposure to these tacle . Keep cord away from heat , oil , and sharp chemicals : work in a well ventilated area , and edges . Following this rule will reduce the risk of electric shock or fire . work with approved safety equipment , such as those dust masks that are specially designed to filter out microscopic particles .
    Page: 5

    SYMBOLS SYMBOL NAME DESIG NATION / EXPLANATION V Volts Voltage A Amperes Current Hz Hertz Frequency ( cycles per second ) min Minutes Time , - _ Alternating Current Type or a characteristic of current = = Direct Current Type or a characteristic of current no No Load Speed Rotational speed , at no load . . . / min Revolutions or Reciprocation Per Minute Revolutions , strokes , surface speed , orbits etc . per minute Indicates danger , warning or caution . , _ Safety Alert Symbol It means attention ! ! ! Your safety is involved . DEFINITIONS A ) DANGER : Failure to obey a safety warning will result in serious injury to yourself or to others . Always follow the safety precautions to reduce the risk of fire , electric shock and personal injury . B ) WARNING : Failure to obey a safety warning can result in serious injury to yourself or to others . Always follow the safety precautions to reduce the risk of fire , electric shock and personal injury . C ) CAUTION : Failure to obey a safety warning may result in property damage or personal injury to yourself or to others . Always follow the safety precautions to reduce the risk of fire , electric shock and personal injury . D ) NOTE : Advises you of information or instructions vital to the operation or maintenance of the equipment . _ k , WARNING : The operation of any drill can result in foreign objects being thrown into your eyes , which can result in severe eye damage . Before beginning power tool operation , always wear safety goggles or safety glasses with side shields and a full face shield when needed . We recommend Wide Vision Safety Mask for use over eyeglasses or standard safety glasses with side shields , available at Sears Retail Stores .
    Page: 6

    KNOW YOUR DRILL - DRIVER KEYLESS CHUCK See Figure 1 . Your drill - driverhas a keyless chuck that allows you to Before attempting to operate your drill - driver , familiar - hand tighten or release drill bit inthe chuck jaws . ize yourself with all operating features and safety SWITCH requirements . To turn your drill - driver ON , depress the switch trigger . Release switch trigger to turn your drill - driver OFF . _ L WARNING : Carefully read through this entire owner's manual before using your new drill - driver . SWITCH LOCK Pay close attention to the Rules For Safe Opera - The switch trigger can be locked in the OFF position . tion , Warnings and Cautions . If you use your drill - This feature helps reduce the possibility of acciden - driver properly and only for what it is intended , you tally starting the tool when not in use . will enjoy years of safe , reliable service . FORWARD / REVERSE SELECTOR ELECTRICAL CONNECTION ( DIRECTION OF ROTATION SELECTOR ) Your drill - driver has a precision built electric motor . It Your drill - driver has a forward / reverse selector located should be connected to a power supply that is 120 above the switch trigger . volts , 60 Hz , AC only ( normal household current ) . VARIABLE SPEED Do not operate this tool on direct current ( DC ) . A substantial voltage drop will cause a loss of power This toot has a variable speed switch that delivers and the motor will overheat . If your drill - driver does higher speed with increased trigger pressure . Speed is not operate when plugged into an outlet , double - controlled by the amount of switch tdgger depression . check the power supply . BIT STORAGE When not in use , bits provided with your drill - driver _ i , WARNING : Do not allow familiarity with your drill - can be placed in the storage area located on the top driver to make you careless . Remember that a of the motor housing . careless fraction of a second is sufficient to inflict severe injury . BITSTORAGEAREA TORQUE ADJUSTMENT RING DIRECTIONOF KEYLESS ROTATIONSELECTOR FORWARD / REVERSE ) LOCK - ON SWlTC BUTTON TRIGGER SCREWDRIVERBITS Fig . 1 are replaced . Failure _ WARNING : If any parts are missing , do not operate your drill - driveruntilthe missing parts to do so could result in possible serious personal injury . 6
    Page: 7

    APPLICATIONS PRODUCT SPECIFICATIONS : DRILL - DRIVER 315.101300 ( Use only for the purpose listed below ) 1 / 16 in . to 3 / 8 in . • Drilling in wood . Chuck Capacity • Drilling in ceramics , plastics , fiberglass , and Rating 120 V , 60 Hz , AC only laminates . 4.5 Amperes Input • Drilling in both hard and soft metals . Switch Variable Speed • Using driving accessories , such as driving screws 0 - 1000 RPM No Load Speed with screwdriver bits . Clutch 24 Positions • Mixing paints . SWITCH VARIABLE SPEED See Figure 2 . See Figure 2 . Your drill has a variable speed switch designed to To turn your drill ON , depress the switch trigger , allow operator control of speed and torque limits . The Release switch trigger to turn your drill OFF . speed and torque of your drill can be increased by FORWARD / REVERSE depressing the switch trigger . SELECTOR Note : Depress switch trigger all the way for maximum speed and torque of your drill . Depress switch trigger CENTERPOSITION only part of the way for less speed and torque . ( LOCK ) Avoid running your drill at low speeds for extended periods of time . Running at low speeds under constant usage may cause your drill to become overheated . If this occurs , cool your drill by running it without a load and at full speed . The following guidelines may be used in determining LOCK - ON SWITCH correct speed for various applications : BUTTON TRIGGER • Low speed is ideal when minimum speed and TO INCREASESPEED , power is required . For example , starting holes DEPRESSSWITCHTRIGGER Fig . 2 without center punching , driving screws , mixing LOCK - ON BUTTON paint , and drilling in ceramics . See Figure 2 . • Medium speed is suitable for drilling hard metals , Your drill is equipped with a lock - on feature which is plastics , and laminates . convenient when continuous drilling for extended • High speed produces best results when maximum periods of time is required . To lock - on , depress the power is required . For example , drilling in wood ; switch trigger , push in and hold the lock - on button soft metals such as aluminum , brass , and copper , located on the side of the handle , then release switch and when using driving accessories . trigger . Release lock - on button and your drill will continue running . To release the lock , depress the switch trigger and release . If you have the lock - on feature engaged during use and your drill becomes disconnected from power supply , disengage the lock - on feature immediately . 7
    Page: 8

    SWITCHLOCK LOCK ( tighten ) or UNLOCK ( release ) the chuck jaws . Grasp and hold the collar of the chuck with one hand . See Figure 3 . Rotate the chuck body with your other hand . Insert The switch trigger can be locked in the OFF position . drill bit straight into the chuck the full length of the This feature can be used to prevent the possibility of jaws , and tighten securely by rotating the chuck body accidental starting when not in use . To lock switch in a clockwise direction . trigger , place the direction of rotation selector in center position . UNLOCK ( Release ) SELECTOR CHUCK CHUCKBODY JAWS CENTERPOSITION ( LOCK ) DRILLBIT LOCK FORWARD ( Tighten ) CHUCK Fig . 3 COLLAR REVERSIBLE RIGHT Fig . 4 See Figure 3 . , _ WARNING " Do not hold chuck body with uoneck This toot has the feature of being reversible . The hand and use power of the drill to tighten ch direction of rotation is controlled by a selector located jaws on drill bit . Chuck body could slip in your above the switch trigger . With the drill held in normal hand or your hand could slip and come in contact operating position , the direction of rotation selector with rotating drill bit . This could cause an should be positioned to the left of the switch for accident resulting in serious personal injury . drilling . The drilling direction is reversed when the selector is to the right of the switch . When the selector INSTALLING BITS is in center position , the switch trigger is locked . See Figure 4 . • Unplug your drill . , _ i , CAUTION : To prevent gear damage , always allow chuck to come to a complete stop before changing the direction of rotation . , _ WARNING : Failure to unplug your drill could result in accidental starting causing serious To stop , release switch trigger and allow the chuck to injury . come to a complete stop . • Open or close the chuck jaws to a point where the • k WARNING : Your drill should never be opening is slightly larger than the bit size you n connected to power supply when you are intend to use . Also , raise the front of your drill assembling parts , making adjustments , installing slightly to keep the bit from falling out of the chuck or removing drill bits , cleaning , or when not in jaws . use . Disconnecting your drill will prevent • Insert drill bit straight into chuck the full length of accidental starting that could cause serious the jaws as shown in figure 4 . personal injury . • Tighten the chuck jaws on drill bit . KEYLESS CHUCK • To tighten the chuck jaws on drill bit ; grasp and hold the collar of the chuck with one hand , while See Figure 4 . rotating the chuck body with your other hand . A keyless chuck has been provided with your drill to Note : Rotate the chuck body in the direction of allow for easy installation and removal of bits . As the the arrow marked LOCK to tighten chuck jaws . name implies , you can hand tighten or release drill bits in the chuck jaws . Arrows on the chuck indicate • Do not use a wrench to tighten or loosen the which direction to rotate the chuck body in order to chuck jaws . 8
    Page: 9

    ADJUSTABLE TORQUE CLUTCH , _ , WARNING : Make sure to insert drill bit straight into chuck jaws . Do not insert drill bit into chuck Your drill is equipped with an adjustable torque clutch jaws at an angle and then tighten , as shown in for driving different types of screws into different Figure 5 . This could cause drill bit to be thrown materials . The proper setting depends on the type of from drill , resulting in possible serious personal material and the size of screw you are using . injury or damage to the chuck . TO ADJUST TORQUE • Identify the twenty four torque indicator settings located on the front of your drill . See Figure 6 . • Rotate adjusting ring to the desired setting . • 1 - 4 For driving small screws . • 5 - 8 For driving screws into soft material . 9 - 12 For driving screws into soft and hard materials . • 13 - 16 For driving screws in hard wood . • 17 - 20 For driving large screws . • 21 - , l _ l For heavy drilling . TO DECREASE ADJUSTING TORQUE RING Fig . 5 REMOVING BITS See Figure 4 . • Unplug your drill . , _ lh WARNING : Failure to unplug your drill could result in accidental starting causing serious injury . • Loosen the chuck jaws from drill bit . • To loosen : grasp and hold the collar of the chuck with one hand , while rotating chuck body with your TO INCREASE other hand . TORQUE Note : Rotate chuck body in the direction of the Fig . 6 arrow marked UNLOCK to loosen chuck jaws . • Do not use a wrench to tighten or loosen the chuck jaws . • Remove drill bit from chuck jaws . 9
    Page: 10

    BIT STORAGE or binding , _ i WARNING : Be prepared for bit See Figure 7 . breakthrough . When these situations occur , drill has a tendency to grab and kick opposite to the When not in use , bits provided with your drill can be direction of rotation and could cause loss of placed in the storage area located on the top of your control when breaking through material . If not drill as shown in figure 7 . prepared , this toss of control can result in BIT possible serious injury . STORAGEAREA When drilling metals , use a light oil on the drill bit to SCREWDRIVER keep it from overheating . The oil will prolong the life of BITS the bit and increase the drilling action . If the bit jams in workpiece or if the drill stalls , release switch trigger immediately . Remove the bit from the workpiece and determine the reason for jamming . Fig . 7 _ L WARNING : Always wear safety goggles orating safety glasses with side shields when oper your drill . Failure to do so could result in dust , shavings , loose particles or foreign objects being thrown into your eyes , causing possible serious injury . DRILLING See Figure 8 . When drilling hard smooth surfaces use a center punch to mark desired hole location , This will prevent the drill bit from slipping off center as the hole is started . However , the low speed feature allows starting holes without center punching if desired . To accomplish this , simply operate your drill at a low speed until the hole is started . The material to be drilled should be secured in a vise Fig . 8 or with clamps to keep it from turning as the drill bit rotates . Hold tool firmly and place the bit at the point to be drilled . Depress the switch trigger to start tool . Move the drill bit into the workpiece applying only enough pressure to keep the bit cutting . Do not force or apply side pressure to elongate a hole . 10
    Page: 11

    CHUCK REMOVAL TO RETIGHTEN A LOOSE CHUCK See Figure 9 , The chuck may become loose on the spindle and The chuck must be removed in order to use some develop a wobble , accessories . To remove : To tighten , follow these steps : • Unplug your drill , • Unplug your drill , , _ k WARNING : Failure to unplug your drill could , _ IL WARNING : Failure to unplug your drill could result in accidental starting causing serious result in accidental starting causing serious injury . injury . • Rotate torque adjusting ring to the maximum • Open the chuck jaws . torque setting . • Insert hex key into chuck and tighten chuck jaws • Insert a 8 mm ( 5 / 16 in , ) or larger hex key into the securely . Tap hex key sharply with a mallet in a chuck of your drill and tighten chuck jaws clockwise direction . securely . • This will tighten the chuck on the spindle . • Tap the hex key sharply with a mallet in a • Open the chuck jaws and remove the hex key . counterclockwise direction , See Figure 9 . • This will loosen the chuck on the spindle . • It can now be unscrewed by hand . See Figure 9 , • Open chuck jaws and remove hex key . TORQUE ADJUSTING RING LLET CHUCK KEYLESS JAWS CHUCK Fig . 9 11
    Page: 12

    GENERAL DOUBLE INSULATION All parts represent an important part of the double Double insulation is a concept in safety in electric insulation system and should be serviced only at a power tools , which eliminates the need for the usual Sears Service Center . three - wire grounded power cord . All exposed metal parts are isolated from the internal metal motor Avoid using solvents when cleaning plastic parts . components with protecting insulation . Double Most plastics are susceptible to damage from various insulated tools do not need to be grounded . types of commercial solvents and may be damaged by their use . Use clean cloths to remove dirt , carbon IMPORTANT dust , etc . Servicing of a tool with double insulation requires extreme care and knowledge of the system and _ i , WARNING : Do not at any time let brake fluids , should be performed only by a qualified service gasoline , petroleum - based products , penetrating technician . For service , we suggest you return the tool oils , etc . come in contact with plastic parts . They to your nearest Sears Service Center for repair . contain chemicals that can damage , weaken or Always use original factory replacement parts when destroy plastic . servicing . EXTENSION CORDS It has been found that electric tools are subject to The use of any extension cord will cause some loss of accelerated wear and possible premature failure when they are used on fiberglass boats , sports cars , power . To keep the loss to a minimum and to prevent wallboard , spackling compounds , or plaster . The tool overheating , use an extension cord that is heavy enough to carry the current the tool will draw . chips and grindings from these materials are highly abrasive to electric tool parts , such as bearings , Awire gage size ( A . W . G . ) of at least 16 is recom - brushes , commutators , etc . Consequently , it is not mended for an extension cord 100 feet or less in recommended that this tool be used for extended length . When working outdoors , use an extension work on any fiberglass material , wallboard , spackling cord that is suitable for outdoor use . The cord's jacket compounds , or piaster . During any use on these will be marked WA . materials , it is extremely important that the tool is cleaned frequently by blowing with an air jet . away _ IL CAUTION : Keep extension cords from thenot LUBRICATION drilling area and position the cord so that it will get caught on lumber , tools , etc . , during drilling All of the bearings in this tool are lubricated with a operation . sufficient amount of high - grade lubricant for the life of the unit under normal operating conditions . Therefore , no further lubrication is required . , _ i WARNING : Check extension cords before each use . If damaged replace immediately . Never use , _ ll WARNING : Always wear safety goggles or tool with a damaged cord since touching the safety glasses with side shields during power tool damaged area could cause electrical shock operation or when blowing dust . If operation is resulting in serious injury . dusty , also wear a dust mask . Extension cords suitable for use with your drill are available at your nearest Sears Retail Store . 12
    Page: 13

    ThefollowingrecommendeadccessorieasrecurrentlyavailableatSearsretailstores . • HighSpeedBits ( Forwoodor metal ) 3 / 8 in . Max . • Doweling Jig ( Item No . _ 9 - 4186 ) • Masonry Bits 1 / 2 in . Max . • Drill Stand ( Item No . _ 9 - 25989 ) • Wood Boring Bits 1 in . Max . • Wire Brushes , All • Hole Saws 1 in . Max . , _ WARNING : The use of attachments or accessories not listed might be hazardous . WARRANTY FULL ONE YEAR WARRANTY ON rP . RFTSMRN 3 / 8 in . DRILL - DRIVER If this rRRFTSHRN 3 / 8 in . Drill - Driver fails to give complete satisfaction within one year from the clare of pur - chase , RETURN IT TO THE NEAREST SEARS STORE IN THE UNITED STATES , and Sears will replace it , free of charge . If this I : RRFTSHRN 3 / 8 in . Drill - Driver is used for commercial or rental purposes , this warranty applies for only 90 days from the date of purchase . This warranty gives you specific legal rights , and you may also have other rights which vary from state to state . Sears , Roebuck and Co . , Dept . 817WA , Hoffman Estates , IL 60179 SAVE THESE INSTRUCTIONS 13
    Page: 14

    14
    Search in Corded Drill on ebay
    "