Home | Register Login | Wanted Manuals | MarketPlace | Members Area | Manuals Manufacturer Directory | UPC Lookup | Information Pages | Policy


Back To Craftsman Cordless Drill       Model: 315.272070 or 315272070 Craftsman Professional 18 Volt 1/2 Inch Cordless Drill Driver
Regular Text Search or Search by Model Number

Register / log-in to add to your Hammerwall Collection.
Manual Location

This is a Craftsman Professional 18 Volt Cordless 1/2 Inch Drill. This drill features a no load speed of 0-400 , 0-1400 RPM, a charge rate of 1 hour, and up to 345 Inch Pounds of Torque.

This is a partial text extraction from the pdf, to download the pdf, click the Manual tab. If you want to search this text, hold control and F, and type the word you are looking for.

Page: 1

Owner's Manual 0 FES S I 0 NAL Variable Speed / Reversible PROFESSIONAL 112 in . CORDLESS DRILL - DRIVER Model No . 315.272070 Save this manual for future reference _ , CAUTION : Read and follow all Safety Rules and Operating Instructions before first use of this product • Safety * Features Customer Help Line : 1 - 800 - 932 - 3188 • Operation • Maintenance Sears , Roebuck and Co . , Hoffman Estates , IL 60179 USA • Parts List visit the Craftsman web page : www . sears . com / craftsman NRTL 972000 - 608 11 - 98
Page: 2

• Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 • Introduction and Product Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 • Rules For Safe Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 5 A . Important Safety Rules For Battery Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 B . Important Safety Instructions For Charger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 C . Important Information For Recharging Hot Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 • Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 • Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 • Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 13 • Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 • Battery Pack Removal and Preparation For Recycling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 • Exploded View and Repair Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ; . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 • Parts Ordering / Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 FULL ONE YEAR WARRANTY ON CRAFTSMAN PROFESSIONAL CORDLESS DRILL - DRIVER If this rlIRFTSNAN Professional Cordless Drill - Driver fails due to a defect in material or workmanship within one year from the date of purchase , Sears will repair it , free of charge . WARRANTY SERVICE IS AVAILABLE BY SIMPLY RETURNING THE TOOL TO THE NEAREST SEARS STORE IN THE UNITED STATES . This warranty gives you specific legal rights , and you may also have other rights which vary from state to state . Sears , Roebuck and Co . , Dept . 817WA , Hoffman Estates , IL 60179 SPECIFICATIONS : Your drill - driver has many features for making drilling operations more pleasant and enjoyable . Safety , 1 / 2 inch Chuck Capacity performance and dependability have been given top Motor 18 Volts DC priority in the design of this drill - driver making it easy Charger Rating 120 Volts , 60 Hz , AC Only to maintain and operate . 0 - 400 / 0 - 1400 RPM No Load Speed _ 1 _ CAUTION : Carefully read through this entire Switch Variable Speed - Reversible owner's manual before using your new drill - 1 Hour Charge Rate driver . Pay close attention to the Rules For Safe 345 / 135 in . Lbs . Maximum Torque Operation , Warnings and Cautions . If you use your drill - driver properly and only for what it is intended , you will enjoy years of safe , reliable service .
Page: 3

The purpose of safety symbols is to attract your attention to possible dangers . The safety symbols , and the explanations with them , deserve your careful attention and understanding . The safety warnings do not by themselves eliminate any danger . The instructions or warn | ngs they give are not substitutes for proper accident prevention measures . SYMBOL MEANING SAFETY ALERTSYMBOL : A Indicmescautionorwarning . Maybausedinco _ un _ ionwithothersymbolsorpictogmphs . WARNING : Failure to obey a safety warning can result in serious injury to yourself or to others . A Always follow the safety precautions to reduce the risk of fire , electdc shock and personal injury . CAUTION : Failure to obey a safety warning may result in property damage or personal injury to A yourself or to others . Always follow the safety precautions to reduce the riskof fire , electric shock and personal injury . NOTE : Advises you of information or instructions vital to the operation or maintenance of the equipment . USE RIGHT TOOL . Don't force small tool or attempt operate _ i _ WARNING : Do not to this • attachment to do the job of a heavy duty tool . tool until you have read thoroughly and Don't use tool for purpose not intended - for understand completely all instructions , example - A circular saw should never be used safety rules , etc . contained in this manual . for cutting tree limbs or logs . Failure to comply can result in accidents involving fire , electric shock , or serious B WEAR PROPER APPAREL . Do not wear loose personal injury . Save owner's manual and clothing or jewelry that can get caught in tool's review frequently for continuing safe moving parts and cause personal injury . Rubber operation , and instructing others who may gloves and nonskid footwear are recommended use this tool . when working outdoors . Wear protective hair covering to contain long hair and keep it from READ ALL INSTRUCTIONS being drawn into nearby air vents . KNOW YOUR POWER TOOL . Read owner's ALWAYS WEAR SAFETY GLASSES . Everyday eyeglasses have only impact - resistant lenses ; manual carefully . Learn its applications and they are NOT safety glasses . limitations as well as the specific potential hazards related to this tool . PROTECT YOUR LUNGS . Wear a face mask or dust mask if operation is dusty . GUARD AGAINST ELECTRICAL SHOCK by preventing body contact with grounded surfaces . PROTECT YOUR HEARING . Wear hearing For example : Pipes , radiators , ranges , refrigera - protection during extended periods of operation . tor enclosures . SECURE WORK . Use clamps or a vise to hold • KEEP WORK AREA CLEAN . Cluttered areas work . It's safer than using your hand and it frees and benches invite accidents . both hands to operate tool . • AVOID DANGEROUS ENVIRONMENT . Don't • DON'T OVERREACH . Keep proper footing and use power tool in damp or wet locations or balance at all times . Do not use on a ladder or expose to rain . Keep work area well lit . unstable support . • KEEP CHILDREN AND VISITORS AWAY . All • MAINTAIN TOOLS WITH CARE . Keep tools visitors should wear safety glasses and be kept a sharp at all times , and clean for best and safest safe distance from work area . Do not let visitors performance . Follow instructions for lubricating contact tool or extension cord . and changing accessories . STORE IDLE TOOLS . When not in use tools REMOVE ADJUSTING KEYS AND should be stored in a dry and high or locked - up WRENCHES , Form habit of checking to see that place - out of the reach of children . keys and adjusting wrenches are removed from tool before turning it on . DON'T FORCE TOOL . It will do the job better and safer at the rate for which it was designed . 3
Page: 4

RULES FOR SAFE OPERATION ( Continued ) DO NOT PLACE BATTERY TOOLS OR THEIR M NEVER USE IN AN EXPLOSIVE ATMO - SPHERE . Normal sparking of the motor could BATTERIES NEAR FIRE OR HEAT . They may explode . ignite flammable liquids , gases , or fumes . DO NOT CHARGE BATTERY TOOL IN A KEEP HANDLES DRY , CLEAN , AND FREE DAMP OR WET LOCATION . FROM OIL AND GREASE . Always use a clean cloth when cleaning . Never use brake fluids , Your battery tool should be charged in a location gasoline , petroleum - based products or any where the temperature is more than 50 ° F but strong solvents to clean your tool . less than 100 ° F . STAY ALERT . Watch what you are doing and Under extreme usage or temperature conditions , use common sense . Do not operate tool when battery leakage may occur . If liquid comes in you are tired . Do not rush . contact with your skin , wash immediately with CHECK DAMAGED PARTS . Before further use so _ . p and water , then neutralize with lemon juice or vinegar . If liquid gets in your eyes , flush them of the tool , a guard or other part that is damaged with clean water for at least 10 minutes , then should be carefully checked to determine that it seek immediate medical attention . will operate properly and perform its intended function . Check for alignment of moving pads , If carrying your battery tool at your side , make binding of moving parts , breakage of pads , sure it is not running and your finger is not on the mounting , and any other conditions that may switch . Avoid accidental starting . affect its operation . A guard or other part that is SECURE WORK before applying power . NEVER damaged should be properly repaired or hold workpiece in your hand or across your legs . replaced by an authorized service center unless indicated elsewhere in this instruction manual . WHEN SERVICING USE ONLY IDENTICAL • DO NOT USE TOOL IF SWITCH DOES NOT CRAFTSMAN REPLACEMENT PARTS . TURN IT ON AND OFF . Have defective switches IMPORTANT SAFETY INSTRUCTIONS FOR replaced by an authorized service center . CHARGER • DRUGS , ALCOHOL , MEDICATION . Do not SAVE THESE INSTRUCTIONS . This manual operate tool while under the influence of drugs , contains important safety and operating alcohol , or any medication . instructions for battery charger part number • DRILLING OR DRIVING SCREWS INTO 975283 - 001 . ELECTRICAL WIRING IN WALLS , CEILINGS , Before using battery charger , read all instructions OR OTHER AREAS CAN CAUSE THE BIT OR and cautionary markings in this manual , on CHUCK TO BECOME ELECTRICALLY LIVE . battery charger , and product using battery Do not touch metal parts when drilling into a wall ; charger . grasp only the insulated handle ( s ) or plastic housing when using this tool . Make sure hidden electrical widng , water pipes , and mechanical _ i , WARNING : To reduce risk of injury , charge hazards are not in the path of the bit when only nickel - cadmium type rechargeable batteries . drilling into a wall . Other types of batteries may burst causing • INSPECT FOR and remove all nails from lumber personal injury and damage . before drilling . Do not expose charger to rain or snow . IMPORTANT SAFETY RULES FOR BATTERY Use of an attachment not recommended or sold TOOLS by the battery charger manufacturer may result Battery tools do not have to be plugged into an in a risk of fire , electric shock , or injury to electrical outlet ; therefore , they are always in persons . operating condition . Be aware of possible To reduce risk of damage to charger body and hazards when not using your battery tool or cord , pull by charger body rather than cord when when changing accessories . disconnecting charger . USE ONLY THE CHARGER PROVIDED WITH Make sure cord is located so that it will not be YOUR BATI'ERY TOOL . Do not substitute any stepped on , tripped over , or otherwise subjected other charger . Use of another charger could to damage or stress . cause batteries to explode causing possible serious injury . 4
Page: 5

RULES FOR SAFE OPERATION ( Continued ) An extension cord should not be used unless have replaced immediately by a qualified serviceman . absolutely necessary . Use of improper extension cord could result in a risk of fire and Do not operate charger if it has received a electric shock . If extension cord must be used , sharp , blow , been dropped , or otherwise make sure : damaged in any way ; take it to a qualified serviceman . a . That pins on plug of extension cord are the same number , size and shape as those of Do not disassemble charger ; take it to a plug on charger . qualified serviceman when service or repair is b . That extension cord is properly wired and in required . Incorrect reassembly may result in a good electrical condition ; and risk of electric shock or fire . c . That wire size is large enough for AC To reduce risk of electric shock , unplug charger ampere rating of charger as specified from outlet before attempting any maintenance below : or t ; leaning . Turning off controls will not reduce this risk . Cord Length ( Feet ) 25 ' 50 ' 100 ' 150 ' • Do not use charger outdoors . Cord Size ( AWG ) 16 16 16 14 • Disconnect charger from power supply when Note : AWG = American Wire Gage not in use . SAVE THESE INSTRUCTIONS . Refer to them DO NOT OPERATE CHARGER WITH A frequently and use them to instruct others who DAMAGED CORD OR PLUG . if damaged , may use this tool . If you loan someone this tool , loan them these instructions also . Look for this symbol to point out important safety precautions . It means attentionfH Your safety is involved . IMPORTANT INFORMATION FOR RECHARGING HOT BATTERIES When using your drill - driver continuously , the batteries in your battery pack will become hot . You should let a hot battery pack cool down for approximately 30 minutes before attempting to recharge . When the battery pack becomes discharged and is hot , this will cause the red light on your battery charger to flash . When battery pack cools down , red light will glow continuously indicating fast charging mode , 1 hour charge time . The green light indicates slow charging mode , requiring overnight charging for batteries to reach full charge . Once the battery pack cools down , it will recharge battery pack in fast charging mode as normal . Note : This situation only occurs when continuous use of your drill causes the batteries to become hot . It does not occur under normal circumstances . Refer to " CHARGING YOUR DRILL - DRIVER " for normal recharging of batteries . If the charger does not charge your battery pack under normal circumstances , return both the battery pack and charger to your nearest Sears repair center for electrical check . , _ WARNING : The operation of any power tool can result in foreign objects being thrown into your eyes , which can result in severe eye damage . Before beginning power tool operation , always wear safety goggles or safety glasses with side shields and a full face shield when needed . We recommend Wide Vision Safety Mask for use over eyeglasses or standard safety glasses with side shields , available at Sears Retail Stores .
Page: 6

Thefollowingrecommended accessories are currently available at Sears Retail Stores . • 6 - Pc . Extra Length Magnite Power Bit Set • 30 - Pc . Power Screwdriver / Nutdriver Set and Case • 17 - Pc . Power Screwdriver / Nutdriver Set and Case • High Speed Bits . . . . . . 1 / 2 in . Max . • Wood Boring Bits . . . . . . 1 - 1 / 2 in . Max . , _ WARNING : The use of attachments or accessories not listed might be hazardous . KNOW YOUR DRILL - DRIVER WRIST STRAP See Figure 1 . See Figure 1 : Before attempting to use any tool familiarize yourself A wrist strap is provided to reduce the chances of with all operating features and safety requirements . dropping your drill - driver . Place one hand through the wrist strap when carrying tool . BATTERYPACK TWO - SPEED BITSTORAGE LEVEL GEARTRAIN ( HI - LO ) UX , L , A . Y ANDLE " Kg . u SS , SWITCH BATTERY TRIGGER CHARGER REDLIGHT " ON " CHARGING MODE WRISTSTRAF YELLOW LIGHT " ON " AND _ SCREWDRIVERBITS REDLIGHTFLASHINGINDICATES DEFECTIVEBATTERYPACK Fig . 1 , _ WARNING : If any parts are missing , do not operate tool until the missing parts are replaced . Failure to do so could result in possible serious personal injury . 6
Page: 7

_ 1 , WARNING : Always wear safety goggles or steady after battery pack has cooled down . safety glasses with side shields when operating If battery pack is deeply discharged , red light should tools . Failure to do so could result in objects become steady after voltage has increased , being thrown into your eyes , resulting in possible normally within 30 minutes . serious injury . If after one hour red lightis still flashing , this indicates a defective battery pack and should be _ , WARNING : Do not allow familiarity with your replaced . drill - driver to make you careless . Remember that Green light on indicates battery pack is in slow a careless fraction of a second is sufficient to charging mode or fully charged . inflict severe injury . Yellow light on and red light flashing indicates defecta * vebattery pack . Return battery pack to your CHARGING YOUR DRILL - DRIVER nearest Sears Repair Center for checking or replacing . The battery pack for this tool has been shipped in a low charge condition to prevent possible problems . • When your battery pack becomes fully charged , the red Therefore , you should charge it until light on front of light will tum OFF and the green light will rum ON . charger changes from red to green . • If you remove battery pack from charger and Note : Battedes will not reach full charge the first time relnsert It Immediately ( leas than 5 seconds ) they are charged . Allow several cycles ( drilling back In charger , the green light will come on followed by recharging ) for them to become fully indicating full charge and slow charging mode charged . until removed from charger . If you remove battery pack from charger and walt more than 5 TO CHARGE seconds before relnserting It back in charger , • Charge battery pack only with the charger the charger will function normally . provided . • After normalusage , 1 hourof chargingtime is requiredto • Make sure power supply is normal house be fully charged . A minimum charge limeof 1 - 1 / 2 hours voltage , 120 volts , 60 Hz , AC only . is requiredto rechargea completelydischargedtool . • Connect charger to power supply . • The battery packwillbecome slightlywarm to the touch • Place battery pack in charger aligning raised rib in while charging . This is normalanddoes not indicatea charger with groove in battery pack . problem . • Press down on battery pack to be sure contacts on • Do not place charger in an area of extreme heat or battery pack engage propedy with charger cold . It will work best at normal room temperature . contacts . , _ CAUTION : Your drill - driver contains special high • Red lightshould turn on . Red light indicates fast charging mode . temperature batteries to help prevent battery damage when left on charge for extended pedods If red light is flashing , this indicates battery pack is of time . However , once the batteries become fully deeply discharged or hot . charged , we recommend that you unplug your If battery pack is hot , red light should become charger from power supply and remove the battery pack . LED FUNCTION OF CHARGER LED WILL BE LIGHTED TO INDICATE STATUS OF CHARGER AND BATTERY PACK : 1 . Red LED Lighted = Fast Charging Mode . 2 . Green LED Lighted = Slow Charging Mode and Fully Charged Battery Pack . 3 . Red LED Flashing = Hot or Deeply Discharged Battery Pack . Also Defective Battery Pack After 1 Hour . 4 . Yellow LED Lighted and Red LED Flashing = Defective Battery Pack . 7
Page: 8

SWITCH TO INSTALL BATTERY PACK See Figure 2 . • Lock switch trigger on your drill by placing the To turn your drill ON , depress the switch trigger . To direction of rotation selector in center position . turn it OFF , release the switch trigger . See Figure 2 . • Place battery pack in your drill . Align raised rib SELECTOR inside ddll with groove on battery pack . See Figure 4 . SWITCHER CENTERPOSITION TRIGG ( LOCK ) Fig . 2 BATrERY PACK t VARIABLE SPEED This tool has a variable speed switchthat delivers higher speed and torque with increased trigger pressure . Speed LATCHES is controlled by the amount of switch trigger depression . Note : You might hear a whistling or ringing noise from the switch during use . Do not be concerned , this is a normal part of the switch function . TWO - SPEED GEAR TRAIN See Figure 3 . Your ddll has a two - speed gear train designed for drilling or ddving at HI or LO speeds . A slide switch is located on top of your drill to select either HI or LO speed . When using drill in the HI speed range , speed DEPRESSLATCHESTO will increase and unit will have less power and torque . RELEASEBATFERYPACK Fig . 4 When using drill in the LO speed range , speed will decrease and unit will have more power and torque . • Make sure the latches on each side of your Use HI speed for fast drilling or driving applications battery pack snap in place and battery pack is and LO speed for high power and torque applications . secured in drill before beginning operation . LOSPEED TWOSPEED _ , CAUTION : When placing battery pack in your GEARTRAIN ( HI - LO ) drill , be sure raised rib inside drill aligns with HISPEED groove on battery pack and latches snap in place properly . Improper assembly of battery pack can cause damage to internal components . TO REMOVE BATTERY PACK • Lock switch trigger on your drill by placing the direction of rotation selector in center position . See Figure 2 . • Locate latches on end of battery pack and depress to release battery pack from your drill . See Figure 4 . • Remove battery pack from your ddll . Fig , 3
Page: 9

SWITCH LOCK See Figure 5 . The switch trigger can be locked in the OFF position . This feature can be used to prevent the possibility of accidental starting when not in use . To lock switch trigger , place the direction of rotation selector in center position . 1 - 7 / 16in . SELECTOR REVERSE SACKSIDEOFCHARGER Fig . 6 CENTERPOSITION ( LOCK ) KEYLESS CHUCK SWITCH See Figure 7 . TRIGGER Your new drill has a keyless chuck . As the name implies , you can hand tighten or release drill bits in the chuck jaws . Grasp and hold the collarof the chuck with one hand . Rotate the chuck body with your other hand . The arrows on the chuck indicate which direction to rotate Fig . 5 the chuck body in order to LOCK ( tighten ) or UNLOCK , _ WARNING : Battery tools are always in ( release ) the drill bit . operating condition . Therefore , switch should always be locked when not in use or carrying at your side . UNLOCK ( RELEASE ) REVERSIBLE See Figure 5 . This tool has the feature of being reversible . The CHUCK BODY direction of rotation is controlled by a selector located above the switch trigger . With the drill held in normal operating position , the direction of rotation selector should be positioned to the left of the switch for drilling . The ddlling direction is reversed when the selector is to the right of the switch . When the selector LOCK CHUCK is in center position , the switch trigger is locked . DRILLBIT _ IGHTEN ) COLLAR CAUTION : To prevent gear damage , always Fig . 7 allow chuck to come to a complete stop before , _ WARNING : Do not hold chuck body with one changing the direction of rotation or the two - hand and use power of the drill to tighten chuck speed gear train ( hi - lo ) . jaws on drill bits . Chuck body could s _ ipin your To stop , release switch trigger and allow the chuck to hand or your hand could slip and come in contact come to a complete stop . with rotating drill bit . This could cause an accident resulting in serious personal injury . CHARGER See Figure 6 . Your charger has a " key hole " hanging feature for convenient , space saving storage . Screws should be installed so that center distances are 1 - 7 / 16 inches apart . 9
Page: 10

CHUCK AUXILIARYHANDLE CHUCK COLLAR See Figure 8 . BODY DRILLBIT An auxiliary handle is packed with your drill - driver for ease of operation and to help prevent loss of control . The handle can be rotated 360 ° TO INSTALL : • Lock the switch trigger by placing the direction of rotation selector in center position . See Figure 2 . • Place ring of handle over the chuck and adjusting CHUCKJAWS ring . Note : Handle fits in a groove behind adjust - ing ring . • Once in position behind adjusting ring , rotate handle to desired angle . • Thread wing screw into handle insert . RIGHT Fig . 9 • Tighten wing screw securely . • To tighten the chuck jaws on drill bit ; grasp and hold the collar of the chuck with one hand , while ADJUSTINGRING rotating the chuck body with your other hand . Note : Rotate the chuck body in the direction of the arrow marked LOCK to tighten chuck jaws . See Figure 7 . • Do not use a wrench to tighten or loosen the chuck jaws . _ 1 = WARNING : Do not insert drill bit into chuck jaws and tighten as shown in figure 10 . This GROOVE could cause drill bit to be thrown from drill resulting in possible serious personal injury or damage to the chuck . AUXIUARY TO LOOSEN WINGSCREW Fig . 8 INSTALLING BITS See Figure 9 . Lock the switch trigger by placing the direction of Fig . 10 rotation selector in center position . See Figure 2 . REMOVING BITS Open or close chuck jaws to a point where the See Figure 9 . opening is slightly larger than the bit size you Lock the switch trigger by placing the direction of intend to use . Also , raise the front of your drill • rotation selector in center position . See Figure 2 . slightly to keep the bit from falling out of the chuck Loosen the chuck jaws from drill bit . jaws . • To loosen : grasp and hold the collar of the chuck • Insert drill bit into chuck the full length of the jaws with one hand , while rotating chuck body with your as shown in figure 9 . other hand . Note : Rotate chuck body in the • Tighten the chuck jaws on drill bit . direction of the arrow marked UNLOCK to loosen chuck jaws . See Figure 7 . Do not use a wrench to tighten or loosen the chuck jaws . Remove drill bit from chuck jaws . 10
Page: 11

ADJUSTABLE TORQUE CLUTCH BIT STORAGE See Figure 12 . Your ddll is equipped with an adjustable torque clutch for driving different types of screws into different When not in use , bits provided with your drill can be materials . The proper setting depends on the type of placed in the storage area located on the top of your material and the size of screw you are using . drill as shown in figure 12 . TO ADJUST TORQUE SCREWDRIVER • Identify the twenty four torque indicator settings BIT _ BITS located on the front of your drill . See Figure 11 . • Rotate adjusting dng to the desired setting . • 1 - 4 For driving small screws . • 5 - 8 For driving screws into soft material . • 9 - 12 For driving screws into soft and hard materials . • 13 - 16 For driving screws in hard wood . • 17 - 20 For driving large screws . • 21 - < LII For heavy drilling . Fig . 12 _ i , WARNING : Always wear safety goggles or TO _ FCREASE safety glasses with side shields when operating UE tools . Failure to do so could result in objects being thrown into your eyes , resulting in possible serious injury . LEVEL DRILLING See Figure 13 . A convenient new feature provided with your drill is a level . It is recessed in the motor housing on top of your ddll . It can be used to keep drill bits level during drilling operations . TO INCREASE ADJUSTING TORQUE RING Fig . 11 Note : Remember the two - speed feature ( HI - LO ) when setting torque . The amount of torque will vary depend - ing on which speed setting you have your ddll - ddver . Switching to LO speed will increase torque . Switching _ ' LEVEL to HI speed will decrease torque . Fig . 13 11
Page: 12

DRILLING , _ WARNING : Be prepared for binding or bit breakthrough . When these situations occur , drill See Figure 14 . has a tdndency to grab and kick opposite to the direction of rotation and could cause loss of control when breaking through matedal . If not prepared , this loss of control can result in possible serious injury . When drilling metals , use a light oil on the drill bit to keep it from overheating . The oil will prolong the life of the bit and increase the drilling action . If the bit j _ ms in workpiece or if the drill stalls , release switch trigger immediately . Remove the bit from the workpiece and determine the reason for jamming . CHUCK REMOVAL See Figures 15 , 16 , and 17 . The chuck must be removed in order to use some accessories . To remove : • Lock the switch trigger by placing the direction of rotation selector in center position . • Insert a 5 / 16 inch or larger allen wrench ( hex key wrench ) into the chuck of your drill and tighten the chuck jaws securely . • Tap the allen wrench sharply with a mallet in a Fig . 14 clockwise direction . See Figure 15 . This will loosen the screw in the chuck for easy removal . When drilling hard smooth surfaces use a center punch to mark desired hole location . This will prevent the drill bit from slipping off center as the hole is MALLET started . However , the low speed feature allows starting holes without center punching if desired . To accomplish this , simply operate your drill at a low speed until the hole is started . KEYLESS The material to be drilled should be ' secured in a vise CHUCK or with clamps to keep it from turning as the drill bit rotates , Hold tool firmly and place the bit at the point to be drilled . Depress the switch trigger to start tool . Move the drill bit into the workpiece applying only enough pressure to keep the bit cutting . Do not force or apply side pressure to elongate a hole . CHUCK WRENCH ALLEN JAWS Fig . 15 12
Page: 13

Insert allen wrench in chuck and tighten chuck CHUCKREMOVAL ( continued ) jaws securely . Tap sharply with a mallet in a • Open chuck jaws and remove allen wrench . counterclockwise direction . This will loosen chuck Remove the chuck screw by turning it in a clock - on the spindle . It can now be unscrewed by hand . wise direction . See Figure 16 . Note : The screw See Figure 17 . has left hand threads . Fig . 16 Fig . 17 TO RETIGHTEN A LOOSE CHUCK The chuck may become loose on spindle and develop a wobble . Also , the chuck screw may become loose causing the chuck jaws to bind and prevent them from closing . To tighten , follow these steps : • Lock the switch trigger by placing the direction of rotation selector in center position . • Insert allen wrench into chuck and tighten chuck jaws securely , Tap allen wrench sharply with a mallet in a clockwise direction . This will tighten chuck on the spindle . • Open the chuck jaws and remove allen wrench . • Tighten the chuck screw . Note : The chuck screw has left hand threads . _ L WARNING : When servicing , use only identical Do not abuse power tools . Abusive practices can Craftsman replacement parts . Use of any other damage tool as well as workpiece . part may create a hazard or cause product Only the parts shown on parts list , page fifteen , are damage . intended to be repaired or replaced by the customer . All other parts should be replaced by a qualified Avoid using solvents when cleaning plastic parts . service technician at an authorized service facility . Most plastics are susceptible to damage from various types of commercial solvents and may be damaged _ , WARNING : Do not attempt to modify this tool or by their use . Use clean cloths to remove dirt , dust , oil , create accessories not recommended for use grease , etc . with this tool . Any such alteration or modification is misuse and could result in a hazardous _ , WARNING : Do not at any time let brake fluids , condition leading to possible serious personal gasoline , petroleum - based products , penetrating injury . oils , etc . come in contact with plastic parts . They contain chemicals that can damage , weaken or destroy plastic . 13
Page: 14

Store and charge your batteries in a cool area . BAI - rERIES Temperatures above normal room temperature Your drill's battery pack is equipped with 15 nickel - will shorten battery life . cadmium rechargeable batteries . Length of service Never store batteries in a discharged condition . from each charging will depend on the type of work Recharge them immediately after they are you are doing . discharged . The batteries in this tool have been designed to All battedes gradually lose their charge . The provide maximum trouble free life . However , like all higher the temperature the quicker they lose their batteries , they will eventually wear out . Do not charge . If you store your tool for long periods of disassemble battery pack and attempt to replace the time without using it , recharge the batteries every batteries . Handling of these batteries , especially when month or two . This practice will prolong battery wearing rings and jewelry , could result in a serious life . burn . To obtain the longest possible battery life , we suggest the following : OVERLOAD Your ddll has a built - in overload protector to protect the motor dudng overloading or prolonged use . The ovedoad protector automatically activates to break the circuit . When this occurs , allow your drill to cool a few seconds before resuming operation . BA'n'ERYPACKREMOVALAND To preserve natural resources , please recycle or dispose of expired battery PREPARATION FOR RECYCLING pack properly . _ h , WARNING : Upon removal , cover the battery This product contains nickel - cadmium pack's terminals with heavy duty adhesive tape . battery . Must be disposed of properly . Do not attempt to destroy or disassemble battery Local , state , or federal laws may pack or remove any of its components . Nickel - prohibit disposal of nickel - cadmium cadmium batteries must be recycled or disposed batteries in ordinary trash . Consult of properly . Also , never touch both terminals with your local waste authority for metal objects and / or body parts as short circuit information regarding available may result . Keep away from children . Failure to recycling and / or disposal options . comply with these warnings could result in fire and / or serious injury . 14
Page: 15

CRAFTSMAN PROFESSIONAL 1 / 2 INCH CORDLESS DRILL - DRIVER MODEL NO . 315.272070 t number inall correspondence regarding your 1 / 2 in . CORDLESS DRILL - DRIVER orwhen orderingel The model number will be found on a plate attached to the motor housing , Always mention the mod I I repair parts . SEE BACK PAGE FOR PARTS ORDERING INSTRUCTIONS 4 3 2 7 PARTS LIST KEY PART DESCRIPTION QUAN , NO . NUMBER 1 975377 - 000 Wing Screw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2 975376 - 000 Auxiliary Handle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 3 975379 - 000 Screw ( Special ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 4 975380 - 001 Chuck . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 6 975284 - 001 Battery Pack ( item No . 9 _ - 11098 ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 6 967216 - 004 Wrist Strap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 7 975283 - 001 * Charger ( Item No . 9 _ - 11069 ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 8 975388 - 000 Carrying Case - Not Shown . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 972000 - 608 Owner's Manual * Can Be Purchased Thru RSOS ( Retail Special Order System ) 15
Page: 16

CRAFTSMAN PROFESSIONAL 112INCH CORDLESS DRILL - DRIVER - - - - - MODEL NUMBER 315.272070 I in all correspondence regarding your 1 / 2 INCH CORDLESS DRILL - DRIVER or when ordering repair parts . I The model number will be found on a plate attached to the motor housing . Always mention the model number | ] 4 3 PARTS LIST KEY PART DESCRIPTION QUAN . NO . NUMBER WING SCREW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1 975377 - 000 AUXILIARY HANDLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2 975376 - 000 3 975379 - 000 SCREW ( SPECIAL ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 CHUCK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 4 975380 - 001 5 * BATTERY PACK ( ITEM NO . 9 - 11098 ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 WRIST STRAP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 967216 - 004 6 7 * CHARGER ( ITEM NO . 9 - 11089 ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 975388 - 000 CARRYING CASE - NOT SHOWN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 8 * Can Be Purchased Thru RSOS ( Retail Special Order System )
Page: 17

( ModNeul mb2e7r2070 ) uan . Key PartNumber Description 1 975377 - 000 Win9Screw 0.1545 0.31 2 975376 - 000 AuxiliarHyandle 1.31 _ 2.64 975379 - 000 3 Sce , w ( Special ) 1 0.1203 0.2402 4 975380 - 001 3huc _ 8.008C 16 . 5 3arteryPack ( ItemNo . 9 - 1109 6 967216 - OO4 NristStrap 0.220C 0.44 7 3harge ( rItemNo . 0 - 11089 ) 8 975388 - 000 3ar _ in9Case - NotShown 5.994 _ 11.99 * CanBePurchaseTdhruRSOS ( RetaiSl pedaOl rdeSr ystem ) _ lodeNl umbe2r72070 ) Qgarl . Key PartNumber Description I illEIm LB llml 4.76 2 975450 - 000 LEVEL 1 0.0721 0.15 3 974365000 GEARCHANGEBUTTON 1 0.1050 0.21 4 975463 - 000 FORWARD - REVERSEACTU 1 0.0824 0,16 5 975448.0 _ 0 SWITCHASSEMBLY 1 15.8414 31.68 8 975459 - 000 CIRCUITBREAKER 1 2,1424 4.28 7 ) 75449 - 000 MOTORW / GEARTRAINAN 1 24.8127 49.63 8 _ 74402 - 000 CLUTCHBALLS 6 0.1810 0.38 : ) 74356 - 000 CLUTCHWASHER 2 0,171 ( 0.34 1C _ ) 75458 - 060 DETENTRING 1 0.0824 0.16 11 _ 75455 - 000 SPRING 1 0.3014 0.71 ] lz " _ 75456 - 000 CLUTCHHUB 1 0.2266 0.45 13 _ 74349 - 000 SCREW 7 0.2020 0.4 ( ; 14 ; ) 74367 . . 000 SCREW 4 0.0210 0.1 _ 1 _ ; ) 74401 . . 000 CLUTCHRETAINER 1 0.2311 0.4E 1E ; ) 74361 . . 000 BALLRETAINER 1 0,0710 0.1 _ 17 ; ) 74366 - 000 CLUTCHBALLS 8 0.0610 0.1 _ 1E ; ) 74368 - 000 THRUSTWASHER 1 0.1510 0,3 ( 1 , , , ; ) 75457 , . 000 CLUTCHCAP 1 0.2266 0.4 _ 2C _ 75465 - 000 CAPSUPPORT 1 0.3090 0,6 ; 21 974362 - 000 DETENTCLIP 2 0.0710 0.1 = , 2 ; 975464 _ 00 SCREW 4 0.0721 0.1 = , I 2 - 99 HI
Page: 18

CRAFTSMAN PROFESSIONAL 1 / 2 INCH CORDLESS DRILL - DRIVER - MODEL NUMBER 315.272070 I The model number will be found on a plate attached to the motor housing . Always mention the model number in all correspondence regarding your I 1 / 2 INCH CORDLESS DRILL - DRIVER or when ordering repair parts . J PARTS LIST DESCRIPTION QUAN . KEY NO . PART NO . HOUSING ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1 980561 - 001 LEVEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2 975450 - 000 GEAR CHANGE BUTTON . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 3 974365 - 000 FORWARD - REVERSE ACTUATOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 4 975463 - 000 SWITCH ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 5 975448 - 000 CIRCUIT BREAKER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 6 975459 - 000 MOTOR W / GEAR TRAIN AND CLUTCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 7 975449 - 000 CLUTCH BALLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 8 974402 - 000 CLUTCH WASHER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 9 974356 - 000 DETENT RING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 10 975458 - 000 SPRING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 11 975455 - 000 CLUTCH HUB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 12 975456 - 000 SCREW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 13 974349 - 000 SCREW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 14 974367 - 000 CLUTCH RETAINER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 15 974401 - 000 BALL RETAINER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 16 974361 - 000 CLUTCH BALLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 17 974366 - 000 THRUST WASHER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 18 974368 - 000 CLUTCH CAP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 19 975457 - 000 CAP SUPPORT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 20 975465 - 000 DETENT CLIP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 21 974362 - 000 SCREW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 22 975464 - 000 OWNER'S MANUAL 972000 - 608R 2 - 99
Page: 19

CRAFTSMAN PROFESSIONAL 1 / 2 INCH CORDLESS DRILL - DRIVER - MODEL NUMBER 315.272070 " _ 2 12 11 1 r , . . . jl 19 I _ . . . . 20 22 21
Page: 20

- _ CRAFTSMAN PROFESSIONAL 1 / 2 INCH CORDLESS DRILL - DRIVER - MODEL NUMBER 315.272070 - - _ RED CIRCUIT MOTOR BREAKER SWITCH RED BLACK RED BLACK WIRINGDIAGRAM
Page: 21

For in - home major brand repair service : Call 24 hours a day , 7 days a week 1 - 800 - 4 - MY - HOME sM ( 1 - 800 - 469 - 4663 ) Para pedir servicio de reparacibn a domicilio - 1 - 800 - 676 - 5811 In Canada for all your service and parts needs call Au Canada pour tout le service ou les pi6ces - 1 - 800 - 665 - 4455 For the repair or replacement parts you need : Call 6 am - 11 pm CST , 7 days a week PartsDirectsM 1 - 800 - 366 . PART ( 1 - 800 - 366 - 7278 ) Para ordenar piezas con entrega a domicilio - 1 - 800 - 659 - 7084 For the location of a Sears Parts and Repair Center in your area : Call 24 hours a day , 7 days a week 1 - 800 - 488 - 1222 For information on purchasing a Sears Maintenance Agreement or to inquire about an existing Agreement : Call 9 am - 5 pm , Monday - Saturday 1 - 800 - 827 - 6655 S / A / R8 HomeCentralSM The Service Side of Sears
Search in Cordless Drill on ebay
"

If you click the (B) symbol next to any of the model numbers it will search for that item, and display it to the left.
Compatible BatteriesTools That use the same battery as this one.
Bat.:9-11098
   Charger:9-11089
   Charger:975283-001

Bat.:975284-001
   Charger:975283-001
   Charger:9-11089

Bat.:315.110980
   Charger:975283-001
   Charger:975208-001
   Charger:9-11089

315.272070 Drill
315.274990 Drill
Additional Battery and Chargers.
Battery pack : 975284-001
Charger : 975283-001
* Clicking the part number will send you to Sears Parts Direct.
0972000-608 Owner's manual
0975388-000 Carrying case
1975377-000 Wing screw
2975376-000 Auxiliary handle
3975379-000 Screw (special)
4975380-001 Chuck
5975284-001 Battery pack
6967216-004 Wrist strap
7975283-001 Charger
0972000-608 Owner's manual
0975388-000 Carrying case
1980561-001 Housing
10975458-000 Detent ring
11975455-000 Spring
12975456-000 Clutch hub
13974349-000 Screw (m4 x 16mm)(8)(standard hardware item-may...
14974367-000 Screw (4)
15974401-000 Clutch retainer
16974361-000 Ball retainer
17974366-000 Clutch balls (8)
18974368-000 Thrust washer
19975457-000 Clutch cap
2975450-000 Level
20975465-000 Cap support
21974362-000 Detent clip (2)
22975464-000 Screw (4)
3974365-000 Gear change button
4975463-000 Forward - reverse actuator
5975448-000 Switch assembly
6975459-000 Circuit breaker
7975449-000 Motor w/gear train and clutch
8974402-000 Clutch balls (6)
9974356-000 Clutch washer (large)
0972000-608 Owner's manual
0975388-000 Carrying case