Home | Register Login | Wanted Manuals | MarketPlace | Members Area | Manuals Manufacturer Directory | UPC Lookup | Information Pages | Policy


Back To Craftsman Cordless Drill       Model: 320.26302 or 32026302 Craftsman Professional Lithium Ion Cordless 1/2 in. Drill Driver
Regular Text Search or Search by Model Number

Register / log-in to add to your Hammerwall Collection.
Manual Location

This is a Craftsman Professional 20 Volt Drill Driver, that is designed for the 20 Volt Lithium Ion Series of Craftsman Tools.

This drill features a 24 position Clutch, and offers an Impressive 500 lbs of torque, that's a lot of torque. The Chuck itself is a completely metal, so you don't have to worry about the plastic on cheaper drills chuck eventually wearing down (I've done it).  The Professional series of Craftsman tools, are the high end cordless tools in the Craftsman lineup and are built to higher standards than the regular line.

Features/ Specifications:

Product Overview:
Item Weight: 5.5 lbs.
General Warranty: 2 years
General Features:
Drill Type: Drill / driver
Bulb Type: LED
Chuck:
Type: Ratcheting
Material: All Metal
Quality: Standard
Motor-Engine:
Type: Electric
Adj. Clutch: Yes
Clutch Torque: Adjustable
Speed Capability: 2 speed
Speed Range RPM: 0-350 / 0-1300 rpm
Torque Settings Number: 24 positions
Torque Maximum: 500 in./lbs.
Handles:
Main Handle Grip: Soft grip
Main Type: T
Color:
Overall Color: Red
Power:
Type: Rechargeable batteries
Batteries:
Number Required: 1
Number Included: None
Cell Type: Lithium-ion
Voltage: 20
Charge Cycle: 50 min.

This is a partial text extraction from the pdf, to download the pdf, click the Manual tab. If you want to search this text, hold control and F, and type the word you are looking for.

Page: 1

Operator's Manual LITHIUlVi = ION CORDLESS 1 / 2 - in . Drill / Driver Model No . 320.26302 320.29032 320.29036 , WARRANTY , SAFETY • ASSEMBLY = DESCRIPTION = OPERATION = MAINTENANCE , _ WARNING : To reduce the risk of injury , the user must read and CHARGE BATTERY understand the operator's manual BEFORE FIRST USE before using this product . Sears , Roebuck and Co . , Hoffman Estates , IL 60179 USA Visit the Craftsman web page : www . sears . com / craftsman Save this manual for future reference
Page: 2

[ ] Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 [ ] Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 [ ] Safety Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 4 [ ] General Safety Rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 7 [ ] Specific Safety Rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 [ ] Safety Rules for Charger / Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 9 [ ] Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 11 [ ] Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 [ ] Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 - 21 [ ] Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 - 23 [ ] Exploded View and Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 - 32 [ ] Sears Repair Parts Phone Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover TWO YEAR LIMITED WARRANTY ON CRAFTSMAN ® PROFESSIONAL TOOL If this Craftsman Professional tool fails due to a defect in material or workmanship , RETURNTED IT TO THE NEAREST SEARS STORE OR OTHER CRAFTSMAN OUTLET IN THE UNI STATES for free replacement during the first year from the date of purchase , and for free repair during the second year from the date of purchase . This warranty does not include expendable parts such as lamps , batteries , bits or blades . This warranty gives you specific legal rights , and you may also have other rights which vary from state to state . Sears , Roebuck and Co . , Hoffman Estates , IL 60179 SAVE THESE iNSTRUCTiONS ! READ ALL iNSTRUCTiONS ) This Drill / Driver has many features for making its use more pleasant and enjoyable . Safety , performance and dependability have been given top priority in the design of this product making it easy to maintain and operate . A • L WARNING : Some dust created by using power tools contains chemicals known to the state of California to cause cancer and birth defects or other repro - ductive harm .
Page: 3

ThepurposoefsafetsyymboislstoattracytouarttentiotonpossibdleangerTsh . esafety symboalsndtheexplanatiwonitshthemdeservyeoucrarefualttentioanndunderstandTihneg . symbwolarninDgsONOTbythemselveelisminaatenydangeTrh . einstructioannsdwarnings theygivearenosubstitutfeosrpropearccidepnrteventimoneasures . _ ' t _ WABN | NG : BE SURE to read and understand all safety alert symbols such as i " DANGER " , " WARNING " and " CAUTION " BEFORE using this product . Failure to follow all instructions may result in electric shock , fire and / or serious personal injury , J SYMBOL SIGNAL MEANING DANGER : situation , which , if not avoided , will result Indicates an imminently hazardous in death or serious injury . WARNING : situation , which , if not avoided , could _ t Indicates a potentially hazardous result in death or serious injury . CAUTION : situation , which , if not avoided , may result , _ Indicates a potentially hazardous in minor or moderate injury . ( Without Safety Alert Symbol ) Indicates CAUTION : a situation that may result in property damage . _ , WABN | NG : To ensure safety and reliability , all repairs should be performed by a ] qualified service technician at Sears Service Center , J m & , WARNING : The operation of any power tool can result in foreign objects I being thrown into your eyes , which can result in severe eye damage . Before I beginning power tool operation , always wear safety goggles or safety glasses with side shields and a full face shield when needed . We recommend Wide I O Vision Safety Mask for use over eyeglasses or standard safety glasses with side I shields . Always use eye protection which is marked to comply with ANSI Z87 . 1 . SAVE THESE iNSTRUCTiONS
Page: 4

Some of these following symbols may be used on this tool . Please study them and learn their meaning . Proper interpretation of these symbols will allow you to operate the tool better and safer . SYMBOL NAME DES | G NAT | ON / EXPLANAT | ON V Volts Voltage A Amperes Current Hz Hertz Frequency ( cycles per second ) W Watt Power min Minutes Time Alternating Current Type of current Direct Current Type or a characteristic of current no No Load Speed Rotational speed , at no load ] Class II Construction Double - insulated construction . . . / rain Per Minute Revolutions , strokes , surface speed , orbits , etc . , per minute locations . Wet Conditions Alert Do not expose to rain or use in damp Read The Operator's Manual read and understand operator's manual i _ To reduce the risk of injury , user must before using this product . Eye Protection glasses with side shields and a full face O Always wear safety goggles or safety shield when operating this product . Safety safety . Alert Precautions that involve your No Hands Symbol blade will result in serious personal injury . Failure to keep your hands away from the No Hands Symbol bFlaaidluerewtioll kreeseuplt yionusrehriaonudss paewrsaoynafrlominjuthrye . No Hands Symbol bFlaaidluerewtioll kreeseuplt yionusrehriaonudss paewrsaoynafrlominjuthrye . No Hands Symbol bFlaaidluerewtioll kreeseuplt yionusrehriaonudss paewrsaoynafrlominjuthrye . Hot Surface Tavooirdedcuocnetatchte wriisthk oafnyinjuhroyt sourrfadcaem . age , 4
Page: 5

_ , WARN | HG ; HEAD AND UNDEHSTAND ALL INSTHUCTIONS . Failure to follow all | instructions listed below may result in electric shock , fire and / or serious personal injury . The term " power tool " in all of the warnings listed below refer to mains - operated ( corded ) 1 power tools or battery - operated ( cordless ) power tools . SAVE THESE iNSTRUCTiONS WORK AREA SAFETY II Keep work area clean and well lit . Cluttered or dark areas invite accidents . m Do not operate power tools in explosive atmospheres , such as in the presence of flammable liquids , gases or dust . Power tools create sparks which may ignite the dust or fumes . m Keep children and bystanders away while operating a power tool . Distractions cause you to lose control . ELECTRICAL SAFETY m Power tool plugs must match the outlet . Never modify the plug in any way . Do not use any adapter plugs with earthed ( grounded ) power tools . Unmodified plugs and matching outlets will reduce the risk of electric shock . m Avoid body contact with earthed ( grounded ) surfaces such as pipes , radiators , ranges and refrigerators . There is an increased risk of electric shock if your body is earthed ( grounded ) . m Do not expose power tools to rain or wet conditions . Water entering a power tool will increase the risk of electric shock . m Do not abuse the cord . Never use the cord for carrying , pulling or unplugging the power tool . Keep cord away from heat , oil , sharp edges or moving parts . Damaged or entangled cords increase the risk of electric shock . m When operating a power tool outdoors , use an extension cord suitable for outdoor use . Use of a cord suitable for outdoor use reduces the risk of electric shock . m Use battery only with Charger / Adapter listed . MODEL BATTERY PACK CHARGER / ADAPTER 320,26302 25708 320,25705 320,29032 29005 320,67099 320 , t032t 320,29036 29006 320,67099 320 , t032t PERSONAL SAFETY m Stay alert , watch what you are doing and use common sense when operating a power tool . Do not use a power tool while you are tired or under the influence of drugs , alcohol or medication . A moment of inattention while operating power tools may result in serious personal injury . m Use safety equipment . Always wear eye protection . Safety equipment such as dust masks , non - skid safety shoes , hard hat or hearing protection used for appropriate conditions will reduce personal injuries . m Avoid accidental starting . Ensure the switch is in the off position before plugging in . Carrying power tools with your finger on the switch or plugging in power tools that have the switch on invites accidents . m Hemove any adjusting key or wrench before turning the power tool on . A wrench or key left attached to a rotating part of the power tool may result in personal injury . m Do not overreach . Keep proper footing and balance at all times . This enables better control of the power tool in unexpected situations .
Page: 6

mDrespsroperly . Do not wear loose clothing or jewelry . Keep your hair , clothing and gloves away from moving parts . Loose clothes , jewelry or long hair can be caught in moving parts . m if devices are provided for the connection of dust extraction and collection facilities , ensure these are connected and properly used . Use of these devices can reduce dust - related hazards . m Do not wear loose clothing or jewelry . Contain long hair . Loose clothes , jewelry or long hair can be drawn into air vents . m Do not use on a ladder or unstable support . Stable footing on a solid surface enables better control of the power tool in unexpected situations . POWER TOOL USE AND CARE m Do not force the power tool . Use the correct power tool for your application . The correct power tool will do the job better and safer at the rate for which it was designated . m Do not use the power tool if the switch does not turn it on or off . Any power tool that cannot be controlled with the switch is dangerous and must be repaired . m Disconnect the plug from the power source and / or the batter pack from the power tool before making any adjustments , changing accessories or storing power tools . Such preventive safety measures reduce the risk of starting the power tool accidentally . m Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool . Power tools are dangerous in the hands of untrained users . m Maintain power tools . Check for misalignment or binding of moving parts , breakage of parts and any other condition that may affect the power tool's operation , if damaged , have the power tool repaired before use . Many accidents are caused by poorly maintained power tools . m Keep cutting tools sharp and clean . Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control . m Use the power tool , accessories and tool bits etc . , in accordance with these instructions and in the manner intended for the particular type of power tool , taking in account the working conditions and the work to be performed . Use of the power tool for operations different from those intended could result in a hazardous situation . BATTERY TOOL USE AND CARE m Ensure the switch is in the off position before inserting battery pack . Inserting the battery pack into power tools that have the switch on invites accidents . m Recharge only with the Charger / Adapter specified by the manufacturer . A Charger / Adapter that is suitable for one type of batter pack may create a risk of fire when used with another battery pack . m Use power tools only with specifically designated battery packs . Use of any other battery packs may create a risk of injury and fire . m When battery pack is not in use , keep it away from other metal objects like paper clips , coins , keys , nails screws or other small metal objects that can make a connection from one terminal to another . Shorting the battery terminals together may cause burns or a fire . m Under abusive conditions , liquid may be ejected from the battery , avoid contact . If contact accidentally occurs , flush with water . If liquid contacts eyes , additionally seek medical help . Liquid ejected from the battery may cause irritation or burns . i _ ' WARN | NG : T ° reduce the risk ° f injury , user must read instructi ° n manual ]
Page: 7

SERVICE m Have your power tool serviced by a qualified repair person using only identical replacement parts . This will ensure that the safety of the power tool is maintained . m When servicing a power tool , use only identical replacement parts . Follow instructions in the Maintenance section of this manual . Use of unauthorized parts or failure to follow Maintenance instructions may create a risk of shock or injury . m Use auxiliary handle supplied with the tool ( Available only in 320.26302 ) . Loss of control can cause personal injury . m Hold power tools by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord . Contact with a " live " wire will also make exposed metal parts of the tool " live " and shock the operator . m Use clamps or another practical way to secure and support the workpiece to a stable platform . Holding the work by hand or against your body leaves it unstable and may lead to loss of control . m Know your power tool . Read operator's manual carefully . Learn its applications and limitations , as well as the specific potential hazards related to this tool . Following this rule will reduce the risk of electric shock , fire or serious injury . m Always wear safety glasses with side shields . Everyday glasses have only impact resistant lenses . They are NOT safety glasses . Following this rule will reduce the risk of eye injury . m Protect your lungs . Wear a face or dust mask if the operation is dusty . Following this rule will reduce the risk of serious personal injury . m Protect your hearing . Wear hearing protection during extended periods of operation . Following this rule will reduce the risk of serious person injury . m Battery tools do not have to be plugged into an electrical outlet ; therefore , they are always in operating condition . Be aware of possible hazards when not using your battery tool or when changing accessories . Following this rule will reduce the risk of electric shock , fire or serious personal injury . m Do not place battery tools or their batteries near fire or heat . This will reduce the risk of explosion and possibly injury . m Do not crush , drop or damage battery pack . Do not use a battery pack or Charger / Adapter that has been dropped or received a sharp blow . A damaged battery is subject to explosion . Properly dispose of a dropped or damaged battery immediately . m Batteries vent hydrogen gas and can explode in the presence of a source of ignition such as a pilot light . To reduce the risk of serious personal injury , never use any cordless product in the presence of open flame . An exploded battery can propel debris and chemicals . If exposed , flush with water immediately . m Do not charge battery tool in a damp or wet location , Following this rule will reduce the risk of electric shock . m For best results , your battery tool should be charged in a location where the temperature is more that 32 ° F ( 0 ° C ) but less that 104 ° F ( 40 ° C ) . Do not store outside or in vehicles . m Under extreme usage or temperature conditions , battery leakage may occur , if liquid comes in contact with your skin , wash immediately wit soap and water , then neutralize with lemon juice or vinegar , if liquid gets in your eyes , flush them with clean water for at least 10 minutes , then seek immediate medical attention . Following this rule will reduce the risk of serious personal injury . m Save these instructions . Refer to them frequently and use them to instruct others who may use this tool . If you loan someone this tool , also loan them these instructions . m if the power supply cord is damaged , it must be replaced only by the manufacturer or by an
Page: 8

, _ , WARN | NG : READ AND UNDERSTAND ALL iNSTRUCTiONS . Failure to follow all | instructions listed below may result in electric shock , fire and / or serious personal injury . 1 ill Before using battery Charger / Adapter , read all instructions and cautionary markings in this manual , on battery Charger / Adapter , battery and product using battery to prevent misuse of the products and possible injury or damage . _ kCAUTION . " To reduce the risk of electric shock or damage to the Charger / Adapter and i battery , charge only lithium - ion rechargeable batteries as specifically designated on your Charger / Adapter . Other types of batteries may burst , causing personal injury or damage . 1 ill Do not use Charger / Adapter outdoors or expose to wet or damp conditions . Water entering Charger / Adapter will increase the risk of electric shock • ill Use of an attachment not recommended or sold by the battery Charger / Adapter manufacturer may result in a risk of fire , electric shock or injury to persons . Following this rule will reduce the risk of electric shock , fire or serious personal injury • ill De not abuse cord or Charger / Adapter . Never use the cord to carry the Charger / Adapter • Do not pull the Charger / Adapter cord rather than the plug when disconnecting from receptacle • Damage to the cord or Charger / Adapter could occur and create an electric shock hazard • Replace damaged cords immediately • ill Make sure cord is located so that it will not be stepped on , tripped over , come in contact with sharp edges or moving parts or otherwise subjected to damage or stress . This will reduce the risk of accidental falls , which could cause injury and damage to the cord , which could result in electric shock • ill Keep cord and Charger / Adapter from heat to prevent damage to housing or internal parts . ill Do not let gasoline , oils , petroleum - based products , etc . come in contact with plastic parts . They contain chemicals that can damage , weaken or destroy plastic • ill An extension cord should not be used unless absolutely necessary . Use of impropermust extension cord could result in a risk of fire and electric shock . If an extension cord be used , make sure : 1 . That pins on plug of extension cord are the same number , size and shape as hose of plug on Charger / Adapter . 2 . That extension cord is properly wired and in good electrical condition ; and 3 . That wire size is large enough for AC ampere rating of Charger / Adapter as specified below : Cord Length ( Feet ) 25 ' 50 ' 100 ' Cord Size ( AWG ) 16 16 16 NOTE : AWG = American Wire Gauge II Do not operate Charger / Adapter with a damaged cord or plug , which could cause shorting and electric shock . I1damaged , have the Charger / Adapter repaired or replaced by an authorized service technician at Sears Service Center . ill Do not operate Charger / Adapter if it has received a sharp blow , been dropped or otherwise damaged in any way . Take it to an authorized service technician at Sears Service Center for an electrical check to determine if the Charger / Adapter is in good working order • ill Do not disassemble Charger / Adapter . Take it to an authorized service technician at Sears Service Center when service or repair is required • Incorrect reassembly may result in a risk of electric shock or fire . ill Unplug Charger / Adapter from outlet before attempting any maintenance or cleaning to reduce the risk of electric shock .
Page: 9

[ ] Disconnect ChargerlAdapter from the power supply when not in use . This will reduce the risk of electric shock or damage to the Charger / Adapter if metal items should fall into the opening . It will also help prevent damage to the Charger / Adapter during a power surge . [ ] Risk of electric shock . Do not touch uninsulated portion of output connector or uninsulated battery terminal . [ ] Save these instructions . Refer to them frequently and use them to instruct others who may use this tool . If you loan someone this tool , loan them these instructions also to prevent misuse of the product and possible injury . iMPORTANT SAFETY iNSTRUCTiONS [ ] SAVE THESE INSTRUCTIONS . This manual contains important safety and operating instructions for battery Charger / Adapter 320.25709 and battery pack 320.25708 . [ ] Before using battery Charger / Adapter , read all instructions and cautionary markings on battery Charger / Adapter , battery and product using battery . [ ] CAUTION . To reduce the risk of injury , charge only lithium - ion rechargeable batteries . Other types of batteries may burst , causing personal injury or damage . _ L , WARN | NG : Use of this product can generate dust containing chemicals known to the state of California to cause cancer , birth defects or other reproductive harm . Some examples of these chemicals are : [ ] Lead from lead - based paints . [ ] Crystalline silica from bricks and cement and other masonry products . [ ] Arsenic and chromium , from chemically treated lumber . Your risk from these exposures varies , depending upon how often you do this type of work . To reduce your exposure to these chemicals : [ ] Work in a well - ventilated area . [ ] Work with approved safety equipment , such as those dust masks that are specially designed to filter out microscopic particles . Avoid prolonged contact with dust from power sanding , sawing , grinding , drilling and other construction activities . Wear protective clothing and wash exposed areas with soap and water . Allowing dust to get into your mouth , eyes or lay on the skin may promote absorption of harmful chemicals .
Page: 10

Fig , I Two - Speed Gear Box Vents Auxillar Handle ( available only in 320.28302 ) Torque Adjustment Ring Direction of Rotation Chuck Selector Jaws ( FORWARD / CENTER Ratcheting LOCK / REVERSE ) Keyless Trigger Chuck Switch Integrated LED Worklight _ mD _ _ • • _ _ Chuck 1 / 2 - in . Ratcheting , single - sleeve keyless Motor 20 Volt DC Switch VSR ( Variable Speed Reversible ) No Load Speed LO 0 - 350 / HI 0 - 1,300 ( RPM ) Clutch 24 Position Torque 500 in . Ibs . Drill / Driver Weight ( without battery ) 3.88 Ibs . Battery Type Lithium - Ion Battery Voltage 20.0 Volt DC Charger / Adapter Input 120 - Volts , 60 Hz AC only Optimum Charging Temperature 32 ° F ( 0 ° C ) - 104 ° F ( 40 ° C ) 10
Page: 11

_ OD _ * • • w ° 0 ¸ Chuck 1 / 2 - in . Ratcheting , single - sleeve keyless Motor 12.0 Volt DC Switch VSR ( Variable Speed Reversible ) No Load Speed LO 0 - 230 / HI 0 - 1,000 ( RPM ) Clutch 24 Position Torque 370 in . Ibs . Drill / Driver Weight ( without battery ) 3.07 Ibs . Battery Type Lithium - Ion Battery Voltage 12.0 Volt DC Charger / Adapter Input 120 - Volts , 60 Hz AC only Optimum Charging Temperature 32 ° F ( 0 ° C ) - 104 ° F ( 40 ° C ) Chuck 1 / 2 - in . Ratcheting , single - sleeve keyless Motor 16.0 Volt DC Switch VSR ( Variable Speed Reversible ) No Load Speed LO 0 - 300 / HI 0 - 1,300 ( RPM ) Clutch 24 Position Torque 420 in . Ibs . Drill / Driver Weight ( without battery ) 3.13 Ibs . Battery Type Lithium - Ion Battery Voltage 16.0 Volt DC Charger / Adapter Input 120 - Volts , 60 Hz AC only Optimum Charging Temperature 32 ° F ( 0 ° C ) - 104 ° F ( 40 ° C ) 11
Page: 12

KNOWYOUR DRILL / DRIVER ( Fig . 1 ) the tool and in this operator's manual as well as a knowledge of the project you are attempting . _ , WARN | NG : Thesafeuseofthisproductrequiresanunderstandingoftheinformationon Before use of this product , familiarize yourself with all operating features and safety rules . ADJUSTABLE TORQUE The drill has a 24 - position clutch . The torque adjustment clutch can be turned to select the right amount of torque for your application . TWO - SPEED GEAR BOX The two - speed gear box is designed for drilling or driving at LO or HI speeds . A slide switch is located on top of your drill for selecting the appropriate speed . VARIABLE SPEED The variable speed trigger switch delivers higher speed with increased trigger pressure and lower speed with decreased trigger pressure . RATCHETING KEYLESS CHUCK The keyless chuck allows you to hand - tighten or release the drill bit in the chuck jaws . The ratcheting feature is designed to prevent the chuck from opening during operation . FORWARD / R EVERS E / CENTER LOCK The drill has a direction of rotation selector located above the trigger switch for changing the direction of bit rotation . Setting the trigger switch in the OFF ( center lock ) position helps reduce the possibility of accidental starting when not in use . AUXILIARY HANDLE ( ONLY COMES WITH 320.26302 ) The drill is equipped with an auxiliary handle for ease of operation and to prevent loss of control . LED WORKLIGHT The LED worklight , located on the front of the drill base , illuminates when the trigger switch is depressed . This feature provides extra light for increased visibility . AWARN | NG : if any parts are broken or missing , DO NOT attempt to plug in the power i cord or operate drill until the broken or missing parts are replaced . Failure to do so could result in possible serious injury . J AWARN | NG : Do not attempt to modify this drill or create accessories not i recommended for use with this drill . Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious injury . J _ , WARN | NG : To prevent accidental starting that could cause serious personal injury , i always remove the battery pack from the drill when assembling parts . ! UNPACKING This product has been shipped completely assembled . I ! 1 Carefully remove the tool and any accessories from the box . Make sure that all items listed in the packing list are included . ! ! Inspect the tool carefully to make sure no breakage or damage occurred during shipping . I ! 1 Do not discard the packing material until you have carefully inspected and satisfactorily operated the drill . I ! 1 If any parts are damaged or missing , please refer to the numbers listed on the back page of operator's manual . PACKING LIST Drill / Driver , Auxiliary Handle ( ONLY AVAILABLE IN 320.26302 ) , Double - ended Bit , Operator's Manual 12
Page: 13

POWEBRAR mThisLithium - Iboantterpyaciksequipped with a POWER BAR which is used to display the battery pack's remaining run time . Press the POWER BAR button to display the LED lights . The LED lights will stay lit for approximately 4 seconds . NOTE : The POWER BAR can be used when the battery is attached or removed from tooJ t Fig , 2 Charge O ® O O 60 - 7g % Charge 0 0 ® ® 4o - sg % Charge 0 0 0 ® 20 - 3g % Charge POWER BAR O O O - E - Cha1rg0e % Under • ' - , ' - , ' , • ' - CompJeteJy d , schorged J LOW CAPACITY WARNING ill If one LED on the POWER BAR begins to flash , the battery pack's charge is under 10 % capacity and should be recharged . ill Unlike other battery pack types , Lithium - ion battery packs deliver fade - free power for their entire run time . The tool will not experience a slow , gradual loss of power as you work . To signal that the battery pack is at the end of its run time and needs to be charged , power to the tool will drop quickly . The POWER BAR will begin to display four flashing LED lights when it is completely discharged . When this happens , remove the tool from the workpiece and charge the battery pack as needed . NOTE : The POWER BAR may also display fourTMflashing LED lights due to an overload j or high temperature situation ( see SmartChip Battery protection ) . SmartChip TM BATTERY PROTECTION SmartChip TM intuitive circuitry protects the battery pack from extreme temperature , over - discharge and over - charge . To protect the battery from damage and prolong its life , the battery pack's SmartChip TM circuitry will turn off the battery pack if it becomes overloaded or if the temperature becomes too high during use . This may happen in extremely high torque , binding and stalling situations . This intelligent system will shutdown your battery pack if its operating temperature exceeds 176 ° F ( 80 ° C ) and will begin normal operation when it returns to 32 ° F ( 0 ° C ) - 122 ° F ( 50 ° C ) . TM ill The POWER BAR will display four flashing LED lights if the SmartChip circuitry detects a momentary overload . You can conveniently reset the battery pack by pressing the POWER BAR button . Press the POWER BAR button again to display the remaining charge . i NOTE : if the POWER BAR continues to flash four LED lights after reset , place the | battery pack on the ChargerlAdapter to evaluate the battery condition ( see Fig . 4 ) . J 13
Page: 14

3 NOTE : A significantly reduced run time after fully charging the battery pack indicates | that the batteries are near the end of their usable life and must be replaced . J COLD WEATHER OPERATION I ! 1 This Lithium - Ion battery pack will provide optimal performance in temperatures between 32 ° F ( 0 ° C ) and 104 ° F ( 40 ° C ) . When the battery pack is very cold , it may " pulse " for the first minute of use to warm itself up . Put the battery pack on a tool and use the tool in a light application . After about a minute , the battery pack will have warmed itself up and will operate normally . WHEN TO CHARGE THE BATTERY PACK The Lithium - Ion battery can be charged at any time and will not develop a " memory " when charged after only a partial discharge . It is not necessary to run down the battery pack charge before recharging . Remove the battery pack from the tool when convenient for you and your job . III Use the POWER BAR to determine when you need to recharge the battery pack . ! ! You can " top - off " your battery pack's charge before starting a big job or long period of use . I ! 1 Due to Lithium - Ion's fade - free properties , the only time it is necessary to charge the Lithium - Ion battery pack is when the pack has reached the end of its charge . To signal the end of charge , power to the tool will drop quickly . Charge the battery pack as needed . HOW TO CHARGE THE BATTERY PACK i | NOTE : This Lithium - ion battery pack is shipped partially charged . Before using it the first time , fully charge the battery pack . J A fully discharged battery pack with a temperature between 32 ° F ( 0 ° C ) and 104 ° F ( 40 ° C ) will charge in about 60 - 120 minutes ( depends on battery's capacity ) . I ! 1 Charge the Lithium - Ion battery pack only with the correct Charger / Adapter . ! ! Connect the Charger / Adapter to a power supply . Fig , 3 I ! 1 Attach the battery pack to the Charger / Adapter by aligning the raised ribs of the battery pack with the slot in the Charger / Adapter . Slide the battery pack onto the Charger / Adapter ( Fig . 3 ) I ! 1 The Charger / Adapter will communicate with the battery pack's SmartChip TM circuitry to evaluate the condition of the battery pack . I ! 1 The POWER BAR LED lights will cycle from right to left during charging . This is part of the normal charging operation . I ! 1 After charging is complete , the green LED on the Charger / Adapter will come on and the POWER BAR LED lights will go off . The POWER BAR LED lights will not be displayed when the POWER BAR button is pressed while the battery pack is on the Charger / Adapter . I ! 1 The battery pack will fully charge , but will not overcharge , if left on the Charger / Adapter . NOTE : For your convenience , the Charger / Adapter can operate with most generators and inverters rated at 300 watts or higher . 14
Page: 15

LED FUNCTIONS OF CHARGER / ADAPTER ( Fig . 4 ) Fig , 4 BATTERY RED GREEN LED iNDiCATOR ACTION PACK LED LED Charging will begin when Hot / Cold On Off battery returns to ( SEE NANUAL ) _ ) Hi / LO TENP . battery 32 ° F ( 0 ° C ) - 104 ° F ( 40 ° C ) Battery pack or Charger / Defective i Flashing Off BATTERY DEFECTIVE Adapter is defective Charging Off Flashing Charging CHARGING BATTERY [ _ Fully Off On Charging is complete FULL BATTERY charged Maintenance charging CHARGING A HOT BATTERY PACK If the battery pack is above normal temperature range , the red LED will be lit and the green LED will be off . When the battery pack cools down to approximately 104 ° F ( 40 ° C ) , the Charger / Adapter will automatically begin charging . CHARGING A COLD BATTERY PACK If the battery pack is below the normal temperature range , the red LED will be lit and the green LED will be off . When the battery warms to a temperature of more than 32 ° F ( 0 ° C ) , the Charger / Adapter will automatically begin charging . DEFECTIVE BATTERY If the Charger / Adapter detects a problem , the red LED will begin flashing and the green LED will be off . m If defective , remove and reinsert the battery pack in the Charger / Adapter . If the LED status reads " defective " a second time , try charging a different battery pack . m If a different battery pack charges normally , dispose of the defective battery pack ( see Maintenance section ) . m If a different battery pack also indicates " defective , " the Charger / Adapter may be defective . BATTERY CHARGING If the battery pack is within normal temperature range , the green LED will begin flashing and the red LED will be off . The battery pack will reach a full charge . The POWER BAR LED lights will cycle right to left during charging . This is part of the normal charging operation . The POWER BAR LED lights will not be displayed when the POWER BAR button is pressed while the battery pack is on the Charger / Adapter . BATTERY FULL If the battery pack is within normal temperature range , the green LED will be lit and the red LED will be off . The battery pack is fully charged and ready to use . The battery pack will fully charge , but will not overcharge , if left on the Charger / Adapter . The POWER BAR LED lights will not be displayed when the POWER BAR button is pressed while the battery pack is oil the Charger / Adapter . NOTE : Charger / Adapter may warm up with several continuous charge cycles . This is / part of the normal operation of the Charger / Adapter . Charge in a well ventilated area . J 15
Page: 16

TOATTACBHATTERPYAC ( KFig5 . ) mLoctkhetriggesrwitcohnthedrilbl yplacing thedirectioonfrotatio ( nforward / reverse / centelorcks ) electionrcenteprosition mAligntheraisepdortioonnthebatterpyack withthegrooveosnthebottomofthedrill , thenattacthhebatterpyactkothedrilal s shown mMakseurethelatchonthebatterpyack snapisntoplacaendthebatterpyack issecuretodthedrilbl eforbeeginning operation . TODETACH BATTERY PACK ( Fig . 5 ) m Lock the trigger switch on the drill by placing the direction of rotation ( forward / reverse / center lock ) selector in center position ! Press the latch located on the front of the battery pack to release battery pack . m Pull forward on the battery pack to remove from the drill . _ , WARN | NG : Battery tools are always in operating condition . Therefore , direction of ] rotation selector should always be locked when not in use or carrying at your side . 16
Page: 17

TRIGGESWRITCH ( Fig . 6 ) To turn the drill ON , depress the switch trigger . To turn it OFF , release the trigger . Direction of rotation VARIABLE SPEED ( Fig . 6 ) selector The variable speed trigger switch delivers higher speed with increased trigger pressure and lower speed with decreased trigger pressure . DIRECTION OF ROTATION SELECTOR ( FORWARD / REVERSE / CENTER LOCK ) ( Fig . 6 ) The direction of bit rotation is reversible and is controlled by a selector located above the trigger switch . With the drill held in normal operating position : m Position the direction of rotation selector to the left of the tool for drilling . m Position the direction of rotation selector to the right of the tool for reverse . ill Setting the switch in the OFF ( center lock ) position helps reduce the possibility of accidental starting when not in use . _ I _ CAUTION : To prevent gear damage , always allow the chuck to come to complete | stop before changing the direction of rotation . ! i NOTE : The drill will not run unless the direction of rotation selector is engaged fully to | the left or right . ] ELECTRIC BRAKE To stop the drill , release the trigger switch and allow the chuck to come to a complete stop . The electric brake quickly stops the chuck from rotating . This feature engages automatically when you release the trigger switch . RATCHETING KEYLESS CHUCK ( Fig . 7 ) Fig , 7 OPEN The drill has a ratcheting keyless chuck to Ratcheting ( release ) tighten or release drill bits in the chuck jaws . Chuck The arrows on the chuck indicate which jaws direction to rotate the chuck body in order to GRIP ( tighten ) or OPEN ( release ) the chuck jaws on the drill bit . The ratcheting feature is designed to prevent the chuck from opening during operation . _ , WARNING : Do not hold the chuck body with one hand and use the power of the drill to tighten the chuck jaws on the drill bit . The chuck body could slip in your hand , or your hand could slip and come in contact with the rotating bit . This could cause an accident resulting in serious personal injury . 17
Page: 18

TWO - SPEGEEDARBOX ( Fig8 . ) Fig , 8 Two - speed Thedrilhl asatwo - spegeedabroxdesigned gearbox switch fordrillinogrdrivinagtLOorHIspeedAs . Hi slideswitcihslocateodnthetopofthedriltlo seleceitther LO or HI speed . When using drill in the LO speed range , speed will decrease and the drill will have more power and torque . When using drill in the HI speed range , speed will increase and the drill will have less power and torque . Use LO speed for high power and torque applications and HI speed for fast drilling or driving applications . NOTE : Avoid running the drill at LO speed for extended periods of time . Running at LO speed under constant usage may cause the drill to become overheated , if this occurs , cool the drill by running it without a load at HI speed . _ CAUTION : Never change gears while the tool is running . Failure to obey this caution / could result in serious damage to the drill . ! ADJUSTABLE TORQUE CLUTCH ( Fig . 9 ) When using the drill / driver for different driving applications , it is necessary to increase or decrease the torque in order to help prevent the possibility of damaging screw heads , threads , workpiece , etc . In general , torque intensity should correspond to the screw diameter , if the torque is too high or the screws too small , the screws may be damaged or broken . The torque is adjusted by rotating the torque Fig , 9 To decrease adjustment ring . torque The torque is greater when the torque adjustment ring is set on a higher setting . The torque is less when the torque adjustment is set on a lower setting . The proper setting depends on the type of material and the size of screw you are using . Select the option that best matches the type of Torque bit , fastener and material you will be using . adjl ring Ill Choose the correct speed : LO or HI . To increase ill Choose the correct torque setting . torque DRILL MODE ( Fig . 10 ) Fig , t0 Drillicon Torque indicator Select drill mode for drilling and other heavy duty applications . ill To select drill mode , rotate the torque adjustment ring until the _ . & . _ icon aligns with the torque indicator and clicks into position . 18
Page: 19

LED WORKLIGHT ( Fig . 11 ) The LED worklight located on the base of the drill will come on when the trigger switch is depressed . The LED worklight will turn off when the trigger switch is released . This provides additional lighting on the surface of the workpiece for operation in lower - light areas . Variable BiT STORAGE ( Fig . 12 ) When not is use , the bit provided with the drill can be stored on the base of the drill by snapping it into place in the bit clip . LED worklight Fig . t2 INSTALLING BITS ( Fig . 13 ) Fig . 13 Ratcheting = = Lock the trigger switch by placing theFF Chuck keyless OPEN direction of rotation selector in the O chuck jaws ( release ) ( center ) position . = = Open or close the chuck jaws to a point where the opening is slightly larger than the bit size you intend to use . Also , raise the front of the drill slightly to keep the bit from falling out of the chuck jaws . = = Insert a drill bit . NOTE : Rotate the chuck body in the I direction of the arrow marked GRIP to close the chuck jaws . Do not use a wrench to t ghten or oosen the chuck jaws . J m Tighten the chuck jaws securely on the bit . REMOVING BiTS ( Fig . 13 ) Fig = t4 WRONG ! m Lock the trigger switch by placing theFF direction of rotation selector in the O ( center ) position . m Open the chuck jaws . NOTE : Rotate the chuck body in the I direction of the arrow marked OPEN to I open the chuck jaws . Do not use a wrench to t ghten or oosen the chuck jaws . J WRONG ! m Remove the drill bit . A . WARN | NG : Make sure to insert the drill bit straight into the chuck jaws . Do not | insert the drill bit into the chuck jaws at an angle then tighten , as shown in figure 15 . This could cause the drill bit to be thrown from the driJJ , resulting in possible serious J personal injury or damage to the chuck . 19
Page: 20

USING THE AUXiLiARY HANDLE ASSEMBLY ( ONLY AVAILABLE iN 320.26302 ) ( Fig . 15 ) An auxiliary handle assembly is packed with the drill for ease of operation and to help prevent loss of control . The handle can be rotated 360 ° and it can also be mounted on the To tighten opposite side for left hand use . m Loosen the handle assembly by turning the handle counterclockwise . m Rotate the handle assembly to the desired operating position . m Securely tighten by turning the handle assembly clockwise . Be sure the handle assembly is securely tightened against the clamp . This secures the handle assembly . DRILLING ( Fig . 16 ) m Check the direction of rotation selector for the correct setting ( forward or reverse ) . m Secure the material to be drilled in a vise or with clamps to keep it from turning as the drill bit rotates . m Hold the drill firmly and place the bit at the point to be drilled . II Depress the trigger switch to start the drill . m Move the drill bit into the workpiece , applying only enough pressure to keep the bit cutting . Do not force the drill or apply side pressure to elongate a hole . Let the tool do the work . m When drilling hard , smooth surfaces , use a center punch to mark the desired hole location . This will prevent the drill bit from slipping off - center as the hole is started . m When drilling metals , use a light oil on the drill bit to keep it from overheating . The oil will prolong the life of the bit and increase the drilling action . m If the bit jams in the workpiece or if the drill stalls , stop the tool immediately . Remove the bit from the workpiece and determine the reason for jamming . NOTE : This drill is equipped withke an electric brake . When the bra is functioning properly , sparks may be visible through the vent slots in the housing . This is normal and is the action of the brake . , _ WARNiNG : Be prepared for binding at bit breakthrough . When these situations I occur , the drill has a tendency to grab and kick opposite to the direction of rotation and could cause loss of control when breaking through material , if not prepared , this loss of control can result in possible serious injury , J 20
Page: 21

WOODDRILLING Fomr aximupmerformanucseeh , ighspeesdteeolrbradpoinbtitsforwooddrilling . mBegidnrillinagtaverylowspeetdoprevetnhtebitfromslippinogffthestartinpgointin , crease speeadsthedrilbl itbitesintothematerial . mWhednrillin " gthroughho " lesp , lacaeblocokfwoobdehintdheworkpietcoeprevernatgged orsplintereeddgeosnthebacskideofthehole . METAL DRILLING For maximum performance , use high speed steel bits for metal or steel drilling . m When drilling metals , use a light oil on the drill bit to keep it from overheating . The oil will prolong the life of the bit and increase the drilling action . H ! Begin drilling at a very low speed to prevent the bit from slipping off the starting point . m Maintain a speed and pressure which allows cutting without overheating the bit . Applying too much pressure will : - Overheat the drill . - Wear the bearings . - Bend or burn bits . - Produce off - center or irregular - shaped holes . MASONRY DRILLING For maximum performance , use carbide - tipped masonry bits when drilling holes in brick , tile , concrete , etc . m Maintain a speed and pressure which allows cutting without overheating the bit or drill . Applying too much pressure will : - Overheat the drill . - Wear the bearings . - Bend or burn bits . Produce off - center or irregular - shaped holes . ! Apply light pressure and medium speed for best results in brick . H ! Apply additional pressure for hard materials such as concrete . m When drilling holes in tile , practice on a scrap piece to determine the best speed and pressure . Begin drilling at a very low speed to prevent the bit from slipping off the starting point . _ WARN | NG : Always wear safety goggles or safety glasses with side shields during power too operat on or when bow ng dust . f operat on s dusty , a so wear a dust mask . _ WARN | NG : To ensure safety and reliability , all repairs should be performed by a qualified service technician at Sears Service Center . 21
Page: 22

GENERAL MAINTENANCE Avoid using solvents when cleaning plastic parts . Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use . Use clean cloths to remove dirt , dust , oil , grease , etc . _ WARN | NG : Do not at any time let brake fluids , gasoline , petroleum - based products , penetrating oils , etc . , come in contact with plastic parts . Chemicals can damage , weaken or destroy plastic which may result in serious personal injury . 1 _ WARN | NG : To avoid serious personal injury , always remove the battery pack I . mthe tool and unplug the Charger / Adapter when cleaning or performing any BATTERIES The battery pack is equipped with Lithium - Ion rechargeable batteries . The duration of use from each charge will depend on the type of work performed . The batteries in this tool have been designed to provide maximum trouble - free life . Like all batteries , they will eventually wear out . Do not disassemble the battery pack or attempt to replace the batteries . Handling of the batteries , especially when wearing rings and jewelry , could result in a serious burn . To obtain the longest possible battery life , read and understand the operators manual . [ ] It is good practice to unplug the Charger / Adapter and remove the Lithium - Ion battery pack when not in use . For Lithium - Ion battery pack storage longer than 30 days : [ ] Store the Lithium - Ion battery pack where the temperature is below 80 ° F ( 26 ° C ) and free of moisture . [ ] Store Lithium - Ion battery packs in a 30 % - 50 % charged condition . [ ] Every six months of storage , fully charge the Lithium - Ion battery pack . [ ] Exterior may be cleaned with a cloth or soft non - metallic brush . BATTERY PACK REMOVAL AND PREPARATION FOR RECYCLING To preserve natural resources , please recycle or dispose of batteries properly . This product contains lithium - ion batteries . Local , state or federal laws may prohibit disposal of lithium - ion batteries in ordinary trash . Consult your local waste authority for information regarding available recycling and / or disposal options . _ WARN | NG : Upon removal , cover the battery pack's terminals with heavy - duty adhesive tape . Do not attempt to destroy or disassemble the battery pack or remove any of its components . Lithium - ion batteries must be recycled or disposed of properly . Also , never touch the terminals with metal objects and / or body parts as a short circuit may result . Keep away from children . Failure to comply with these warnings could result in fire and / or serious injury , 22
Page: 23

CHUCRKEMOV ( AFLig1 . 7 - 19 ) Thechucckanberemovaenddreplacbeya newone . mLoctkhetriggesrwitcbhyplacinthge directioonfrotatiosnelectioncr enteprosition . ! Openthechucjkaws . mInseart5 / 16 - ionr . largehrexkeyintothe chucokfthedrilal ndtightetnhechucjkaws securely . mTapthehexkeysharpwlyithamalleint aclockwidseirectioTnh . iswillloosetnhe Ratcheting screwinthechucfkoreasyremoval . keylessk chuc mOpenthechucjkawsandremovtheehex keyU . sinagscrewdrivreemr , ovtheechuck screwbyturninigtinaclockwidseirection . Fig . t8 tNhrOeTaEds : , The chuck screw has left handed J Screwdriver m Insert the hex key into the chuck and tighten the chuck jaws securely . Tap sharply with as mallet in a counterclockwise direction . Thi will loosen the chuck on the spindle . It can now be unscrewed by hand . TO RETIGHTEN A LOOSE CHUCK The chuck may become loose on the spindle and develop a wobble . Also , the chuck screw may become loose , causing the chuck jaws to bind and prevent them from closing . To tighten a loose chuck or chuck screw : m Lock the trigger switch by placing the direction of rotation selector in center position . m Open the chuck jaws . m Insert the hex key into the chuck and tighten the chuck jaws securely . Tap the hex key % sharply with a mallet in a clockwise direction . This will tighten the chuck oil the spindle . m Open the chuck jaws and remove the hex key . m Using a screwdriver , tighten the chuck Hex key Chuck screw by turning the chuck screw in a Jaws counterclockwise direction . i AWARNING : Always wear safety glasses with side shields during maintenance . J A _ WARN | NG : To ensure safety and reliability , all repairs should be performed by a i qualified service technician at Sears Service Center . J WARN | NG : To avoid serious personal injury , always remove the battery pack m the tool and unplug the Charger / Adapter when cleaning or performing any maintenance . ] 23
Page: 24

@ ® / @ © 20 Volt . LITHIUMqON CORDLESS 1 / 2 - in . DRILL / DRIVER MODEL NUMBER 320.26302
Page: 25

20 Volt . MTHIUM - ION CORDLESS 1 / 2 - in . DRILL / DRIVER MODEL NUMBER 320.26302 The Model Number will be found on the Nameplate attached to the right side of the drill . Always mention the Model Number in all correspondence regarding your tool . ITEM NO . PARTS NO . PART DESCRIPTION QTY . 1 5820325000 Screw ( L . H . ) 1 2 3860084000 Chuck 1 3 3420466000 Decorate Cover 1 4 3320358000 Clutch Cap 1 5 5810032000 Tapping Screw 4 8 2790110000 Gear Case ASSY . 1 7 5620049000 Tapping Screw 2 8 5850015000 Washer 2 9 3550673000 Pinion 1 10 2730114000 DC Motor 1 11 3122817000 Speed Change Button 1 12 3700961000 Spring Stop 1 13 3700972000 Name Plate 1 14 3700971000 Name Plate 1 15 5610013000 Tapping Screw 8 18 3320359000 Right Housing ASSY . 1 17 3700963000 Lantern Ring 1 18 3122818000 F / R Button 1 19 Inner Lead 1 set 20 4870303000 Switch 1 21 4890301000 PCB ASSY . 1 22 3400260000 Contact Receptacle ASSY . 1 23 3700960000 Handle Hoop 1 24 3320360000 Left Housing ASSY . 1 28 3700973000 Name Plate 1 28 3700405000 Bits Holder 1 27 3810357000 Bits 1 28 5640154000 Lock Bolt 1 29 3122938000 Splint 1 30 3420500000 Handle Cover 1 31 3122946000 Plate 1 25
Page: 26

20 Volt . LITHIUM - ION CORDLESS 1 / 2 - in . DRILL / DRIVER MODEL NUMBER 320.26302 The Model Number will be found on the Nameplate attached to the right side of the drill . Always mention the Model Number in all correspondence regarding your tool . iTEM NO , PARTS NO , PART DESCRIPTION QTY , 32 3400274000 Handle 1 33 3700974000 Name Plate 1 34 3660252000 Handle Hoop 1 SEE BACK PAGE FOR PARTS ORDERING iNSTRUCTIONS 26
Page: 27

mL _ rm _ jc o _ J _ J r - r _ m
Page: 28

12 Volt . LITHIUM = ION CORDLESS 1 / 2 = in . DRILL / DRIVER MODEL NUMBER 320.29032 The Model Number will be found on the Nameplate attached to the right side of the drill . Always mention the Model Number in all correspondence regarding your tool . | TEM NO , PARTS NO , PART DESCRIPTION QTY , 1 3810357000 SCREW BIT 1 2 2822394000 MOTOR & GEAR ASSY 1 3 3700961000 STOP SPRING 1 4 5610098000 THREAD FORMING SCREW 4 5 5650007000 SPRING WASHER 2 6 3860084000 CHUCK 1 7 5610106000 TAPPING SCREW 4 8 3420605000 DECORATE COVER 1 9 5650003000 SPRING WASHER 1 10 5620031000 SCREW 1 11 3703673000 BIT HOLDER 1 12 5620034000 SCREW 4 13 5700046000 STEEL BALL 6 14 3703909000 HEAT SINK 1 15 3700408000 GASKET 1 1 16 3660109000 SPRING 1 17 4920155000 SHRINKABLE TUBE 1 18 3320525000 SWITCH TRIGGER 1 19 3550290000 LOCK PIN 10 20 2790118000 GEAR CASE ASSY 1 21 3704024000 MOUNTING PLATE 1 22 5610013000 TAPPING SCREW 8 23 5620325000 SCREW ( L . H . ) 1 24 3703983000 SPRING STOP 1 25 3123494000 SPRING HOLDER 1 26 3123133000 F / R BUTTON 1 27 3123511000 CLUTCH CAP 1 28 3320493000 LEFT HOUSING ASSY 1 29 3320494000 RIGHT HOUSING ASSY 1 30 3121435000 PLASTIC SLEEVE 1 31 3700972000 NAME PLATE 1 28
Page: 29

12 Volt . LITHIUM = ION CORDLESS 1 / 2 = in . DRILL / DRIVER MODEL NUMBER 320.29032 The Model Number will be found on the Nameplate attached to the right side o1the drill . Always mention the Model Number in all correspondence regarding your tool . ITEM NO , PARTS NO , PART DESCRIPT | ON QTY , 32 3122817000 SPEED CHANGE BUTTON 1 33 3700960000 HANDLE HOOP 1 34 3123141000 BRACKET 1 35 3700963000 LANTERN RING 1 36 3402175000 CONTACT RECEPTACLE ASSY 1 37 4870346000 TRIGGER SWITCH 1 38 4360225000 LED 1 39 4120311000 LEAD RESISTOR 1 SEE BACK PAGE FOR PARTS ORDERING INSTRUCTIONS 29
Page: 30

mL Oi _ o _ c r - € _ € _
Page: 31

16 Volt . LITHIUM - ION CORDLESS 1 / 2 - in . DRILL / DRIVER MODEL NUMBER 320.29036 The Model Number will be found on the Nameplate attached to the right side of the drill . Always mention the Model Number in all correspondence regarding your tool . ITEM NO . PARTS NO . PART DESCRIPTION QTY . 1 3810357000 SCREW BIT 1 2 2822394000 MOTOR & GEAR ASSY 1 3 3700961000 STOP SPRING 1 4 5810098000 THREAD FORMING SCREW 4 5 5850007000 SPRING WASHER 2 6 3860084000 CHUCK 1 7 5810108000 TAPPING SCREW 4 8 3420605000 DECORATE COVER 1 9 5850003000 SPRING WASHER 1 10 5620031000 SCREW 1 11 3703673000 BIT HOLDER 1 12 5620034000 SCREW 4 13 5700046000 STEEL BALL 6 14 3703909000 HEAT SINK 1 15 3700408000 GASKET 1 1 16 3660109000 SPRING 1 17 4920155000 SHRINKABLE TUBE 1 18 3320525000 SWITCH TRIGGER 1 19 3550290000 LOCK PIN 10 20 2790118000 GEAR CASE ASSY 1 21 3704024000 MOUNTING PLATE 1 22 5610013000 TAPPING SCREW 8 23 5620325000 SCREW ( L . H . ) 1 24 3703983000 SPRING STOP 1 25 3123494000 SPRING HOLDER 1 28 3123133000 F / R BUTTON 1 27 3123511000 CLUTCH CAP 1 28 3320493000 LEFT HOUSING ASSY 1 29 3320494000 RIGHT HOUSING ASSY 1 30 3121435000 PLASTIC SLEEVE 1 31 3700972000 NAME PLATE 1 31
Page: 32

16 Volt . LITHIUM = ION CORDLESS 1 / 2 = in . DRILL / DRIVER MODEL NUMBER 320.29036 The Model Number will be found on the Nameplate attached to the right side of the drill . Always mention the Model Number in all correspondence regarding your tool . ITEM NO , PARTS NO , PART DESCRIPTION GTY , 32 3122817000 SPEED CHANGE BUTTON 1 33 3700980000 HANDLE HOOP 1 34 3123141000 BRACKET 1 35 3700963000 LANTERN RING 1 36 3402175000 CONTACT RECEPTACLE ASSY 1 37 4870346000 TRIGGER SWITCH 1 38 4360225000 LED 1 39 4120311000 LEAD RESISTOR 1 SEE BACK PAGE FOR PARTS ORDERING iNSTRUCTIONS 32
Page: 33

33
Page: 34

34
Page: 35

35
Page: 36

Your Home For repair - in your home - of all major brand appliances , lawn and garden equipment , or heating and cooling systems , no matter who made it , no matter who sold it ! iiiiiiiiiiiiiiii For the replacement parts , accessories and owner's manuals that you need to do - it - yourself . iiiiiiiiiiiiiiii For Sears professional installation of home appliances and items like garage door openers and water heaters . iiiiiiiiiiiiiiii 1 - 800 - 4 - MY - HOME ® Anytime , day or night / 1 - _ 00 - 469 - _ _ U63SotAndOonada _ www . sres , . co , , www . sre _ , . c , HHHHHHHH OuHr ome HHHHHHHH For repair of carry - in items like vacuums , lawn equipment , and electronic , call or go on - line for the location of your nearest SeaPr , ort _ , , epaiCr enter . HHHHHHHH 1 - 800 - 488 - 1222 Anytime , day or night ( U . S . A . only ) , , , . , eo , , . co _ HHHHHHHH To purchase a protection agreement ( U . S . A . ) or maintenance agreement ( Canada > on a product serviced by Sears : 1 - 800 - 827 - 6655 ( U . S . A . ) 1 - 800 - 361 - 6665 ( Canada ) Para pedir servicio de reparaciSn Au Canada pour service en francais : a domicilio , y para ordenar piezas : 1 - 800 - LE - FOYER ac ili ! il , - 888 - so - HoGAR , 1 - 00 - 33 - 6937 , © Sears Brands , LLC _ Registered Trademark / TMTrademark / SM Service Mark of Sears Brands , LLC _ Mama Registrada / TMMarca de F _ brica / sM Marca de Servicio de Sears Brands , LLC MCMarque de commerce / MDMarque d6pos6e de Sears Brands , LLC
Search in Cordless Drill on ebay
"

If you click the (B) symbol next to any of the model numbers it will search for that item, and display it to the left.
Compatible BatteriesTools That use the same battery as this one.
Bat.:25708
   Charger:320.25709

320.26302 Drill
Additional Battery and Chargers.
Battery/charger combo : 2770110000
Charger : 0800107000
* Clicking the part number will send you to Sears Parts Direct.
02340226004 Owners manual
12770110000 Battery/charger combo
10800107000 Charger
15620325000 Screw,l.h
102730114000 Motor
113122817000 Spd change button
123700961000 Spring stop
133700972000 Nameplate
143700971000 Nameplate
155610013000 Screw
163320359000 R housing asy
173700963000 Lantern ring
183122818000 F/r button
19N/A Inner lead
23860084000 Chuck
204870303000 Switch
214890301000 Pcb asy
223400260000 Contact receptacle asy
233700960000 Handle hoop
243320360000 L housing asy
253700973000 Nameplate
263700405000 Bits holder
273810357000 Bits
285640154000 Lock bolt
293122938000 Splint
33420466000 Decorate cover
303420500000 Handle cover
313122946000 Plate
323400274000 Handle
333700974000 Nameplate
343660252000 Handle hoop
43320358000 Clutch cap
55610032000 Screw
62790110000 Gear case asy
75620049000 Screw
85650015000 Spring washer
93550673000 Pinion