Home | Register Login | Wanted Manuals | MarketPlace | Members Area | Manuals Manufacturer Directory | UPC Lookup | Information Pages | Policy


Back To PanaSonic Home Theatre System       Model: SA-HT56 or SAHT56 PanaSonic Home Theater Audio System HDMI Viera Link Manual
Regular Text Search or Search by Model Number

Register / log-in to add to your Hammerwall Collection.
Manual Location


This is a partial text extraction from the pdf, to download the pdf, click the Manual tab. If you want to search this text, hold control and F, and type the word you are looking for.

Page: 1

Operating Instructions Home Theater Audio System Model No . SC - HT56 Dear customer Thank you for purchasing this product . Before connecting , operating or adjusting this product , please read the instructions completely . Please keep this manual for future reference . If you have any questions contact 1 - 800 - 211 - PANA ( 7262 ) The warranty can be found on page 23 . As an ENERGY STAR Partner , Panasonic has determined that this product meets the ENERGY STAR guidelines for energy efficiency . P RQTX0175 - 2P SC - HT56P_MP ( RQTX0175 - 2P ) . indb 1 9 / 19 / 2008 12 : 27 : 44 PM
Page: 2

IMPORTANT SAFETY INSTRUCTIONS these operating instructions carefully before using the unit . Follow the safety instructions on the unit and the applicable safety Read instructions listed below . Keep these operating instructions handy for future reference . Protect the power cord from being walked on or pinched 1 ) Read these instructions . 10 ) particularly at plugs , convenience receptacles , and the point 2 ) Keep these instructions . where they exit from the apparatus . 3 ) Heed all warnings . 11 ) Only use attachments / accessories specified by the 4 ) Follow all instructions . manufacturer . 5 ) Do not use this apparatus near water . INSTRUCTIONS 12 ) Use only with the cart , stand , tripod , bracket , or table specified by the 6 ) Clean only with dry cloth . manufacturer , or sold with the apparatus . 7 ) Do not block any ventilation openings . Install in accordance When a cart is used , use caution when with the manufacturer’s instructions . moving the cart / apparatus combination to 8 ) Do not install near any heat sources such as radiators , heat avoid injury from tip - over . registers , stoves , or other apparatus ( including amplifiers ) 13 ) Unplug this apparatus during lightning storms or when SAFETY that produce heat . unused for long periods of time . 9 ) Do not defeat the safety purpose of the polarized or 14 ) Refer all servicing to qualified service personnel . Servicing grounding - type plug . A polarized plug has two blades with is required when the apparatus has been damaged in any one wider than the other . A grounding - type plug has two IMPORTANT way , such as power - supply cord or plug is damaged , liquid blades and a third grounding prong . The wide blade or the has been spilled or objects have fallen into the apparatus , third prong are provided for your safety . If the provided the apparatus has been exposed to rain or moisture , does plug does not fit into your outlet , consult an electrician for not operate normally , or has been dropped . replacement of the obsolete outlet . FCC Note : This equipment has been tested and found to comply with the CAUTION limits for a Class B digital device , pursuant to Part 15 of the RISK OF ELECTRIC SHOCK FCC Rules . DO NOT OPEN These limits are designed to provide reasonable protection against harmful interference in a residential installation . This CAUTION:TO REDUCE THE RISK OF ELECTRIC equipment generates , uses and can radiate radio frequency SHOCK , DO NOT REMOVE SCREWS . energy and , if not installed and used in accordance with NO USER - SERVICEABLE PARTS INSIDE . the instructions , may cause harmful interference to radio REFER SERVICING TO QUALIFIED communications . However , there is no guarantee that SERVICE PERSONNEL . interference will not occur in a particular installation . If this equipment does cause harmful interference to radio or television reception , which can be determined by turning the The lightning flash with arrowhead symbol , equipment off and on , the user is encouraged to try to correct within an equilateral triangle , is intended to the interference by one or more of the following measures : alert the user to the presence of uninsulated  Reorient or relocate the receiving antenna . “ dangerous voltage ” within the product’s  Increase the separation between the equipment and enclosure that may be of sufficient magnitude receiver . to constitute a risk of electric shock to persons .  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected . The exclamation point within an equilateral  Consult the dealer or an experienced radio / TV technician triangle is intended to alert the user to the for help . presence of important operating and unauthorized changes or modifications to this equipment Any maintenance ( servicing ) instructions in the would void the user’s authority to operate this device . literature accompanying the appliance . This device complies with Part 15 of the FCC Rules . Operation is subject to the following two conditions : ( 1 ) This WARNING : device may not cause harmful interference , and ( 2 ) this device must accept any interference received , including interference TO REDUCE THE RISK OF FIRE , ELECTRIC SHOCK OR that may cause undesired operation . PRODUCT DAMAGE , • DO NOT EXPOSE THIS APPARATUS TO RAIN , Responsible Party : MOISTURE , DRIPPING OR SPLASHING AND THAT NO Panasonic Corporation of North America OBJECTS FILLED WITH LIQUIDS , SUCH AS VASES , One Panasonic Way SHALL BE PLACED ON THE APPARATUS . Secaucus , NJ 07094 • USE ONLY THE RECOMMENDED ACCESSORIES . RQTX0175 Support Contact : • DO NOT REMOVE THE COVER ( OR BACK ) ; THERE Panasonic Consumer Electronics Company ARE NO USER SERVICEABLE PARTS INSIDE . REFER Telephone No . : 1 - 800 - 211 - PANA ( 7262 ) SERVICING TO QUALIFIED SERVICE PERSONNEL . 2 SC - HT56P_MP ( RQTX0175 - 2P ) . indb 2 9 / 19 / 2008 12 : 27 : 51 PM
Page: 3

System SC - HT56 Supplied accessories AV Control Receiver SA - HT56 Please check and identify the supplied accessories . Front speakers SB - HF56 Use numbers indicated in parentheses when asking for replacement parts . Surround speakers SB - HS760 ( Product numbers correct as of September 2008 . Center speaker SB - HC760 These may be subject to change . ) To order accessories , refer to “ Accessory Subwoofer SB - HWX50 Purchases ” on page 23 . Table of contents caution 1 AC power 2 Batteries Before use supply cord ( K2CB2CB00021 ) IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . 2 1 Calibration Supplied accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 accessories / Listening microphone Listening caution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1 FM indoor ( L0CBAB000125 ) The remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 antenna Control guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 ( RSA0007 - L1 ) 1 Remote control Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 YB000319 ) ( N2QA Main unit / Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 1 AM loop STEP 1 Speaker setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 antenna Placement of speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Speaker cables ( N1DAAAA00002 ) Connect the speakers to the receiver . . . . . . . . . . . . . . . . . . . . . . . . 6 3.0 m / 9.8 ft . x 2 Other speaker setup options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 ( REEX0449K - 2K ) 1 Speaker Supplied Wireless system connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 3.0 m / 9.8 ft . x 1 sticker sheet STEP 2 Home theater connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 ( REEX0449K - 2M ) TM ( RQCXA0013 - 1 ) ” . . . . . . . . . . . . . . . . . 8 HDMI and VIERA Link “ HDAVI Control 8.0 m / 26.2 ft . x 2 High - quality audio and video simply with HDMI ( REEX0449E - 2K ) connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Using the VIERA Link “ HDAVI Control ” . . . . . . . . . . . . . . . . . . . . . . . . 8 TV , BD player / DVD recorder and DVD player . . . . . . . . . . . . 9 Listening caution STEP 3 Antenna and AC power supply connections . . . . . . . 10 STEP 4 Auto speaker setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Process for auto speaker setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Troubleshooting for auto speaker setup . . . . . . . . . . . . . . . . . 12 EST . 1924 Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Distance / Auto setup / Input mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 HDMI settings / DRCOMP / Attenuator / TV delay / Selecting fine audio equipment such as the unit you’ve just Adjusting speaker output level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 is only the start of your musical enjoyment . Now it’s purchased time to consider how you can maximize the fun and excitement Operations your equipment offers.This manufacturer and the Electronic Basic operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Industries Association’s Consumer Electronics Group want you Adding surround effects to stereo sources . . . . . . . . . . . . 15 to get the most out of your equipment by playing it at a safe level . Using Dolby Pro Logic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 ΙΙ One that lets the sound come through loud and clear without Using the Sound Field Control ( SFC ) . . . . . . . . . . . . . . . . . . . . . . . . . 15 annoying blaring or distortion - and , most importantly , without MENU operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 affecting your sensitive hearing . The radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Direct tuning / Automatic presetting / Manual We recommend that you avoid prolonged exposure to excessive presetting / Selecting channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 noise . Sound field . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Adjusting the tone / Dimension Control “ DIMEN ” / Sound can be deceiving . Over time your hearing “ comfort level ” Center Width Control “ C - WDTH ” / Balance / adapts to higher volumes of sound . So what sounds “ normal ” can Center focus / Adjusting SFC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 actually be loud and harmful to your hearing . Other functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Guard against this by setting your equipment at a safe level Sleep timer / Muting / Dimmer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 BEFORE your hearing adapts . The RESET function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 To establish a safe level : Remote control operation guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 • Start your volume control at a low setting . Watching DVDs / TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 lowly increase the sound until you can hear it comfortably • S Operating the DVD recorder / DVD player . . . . . . . . . . . . . . . . . 20 and clearly , and without distortion . Operating the TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Changing the remote control code . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Once you have established a comfortable sound level : RQTX0175 Set the dial and leave it there . • Reference Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Taking a minute to do this now will help to prevent hearing Troubleshooting guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 damage or loss in the future . After all , we want you listening for a Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 lifetime . Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 3 Product Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back cover SC - HT56P_MP ( RQTX0175 - 2P ) . indb 3 9 / 19 / 2008 12 : 27 : 53 PM
Page: 4

The remote control Use 1 Aim at the sensor , avoiding obstacles , at a maximum range of 7 m ( 23 feet ) directly in front of the unit . 3 R6 / LR6 , AA Remote control signal sensor 2 2 guide g Batteries control / Control • Insert so the poles ( + and – ) match those in the remote 7 meters ( 23 feet ) control . • Do not use rechargeable type batteries . • Do not heat or expose to flame . Transmission window • Do not leave the batteries in an automobile exposed to direct sunlight for a long period of time with doors and windows closed . remote CAUTION Note Danger of explosion if battery is incorrectly replaced . The Replace only with the same or equivalent type • Keep the transmission window and the unit's sensor free from recommended by the manufacturer . dust . Dispose of used batteries according to the manufacturer’s • peration can be affected by strong light sources , such as O instructions . direct sunlight , and the glass doors on cabinets . Control guide Remote control This page describes the buttons used to control this unit . See the guide at pages 20 and 21 for the buttons that control other units . ― DVD - P ] [ ^ ] [ TV ] [ BD / DVR , 7 1 7 1 Standby / on button . Input mode and remote control mode buttons . ― BAND ] [ TUNER , 2 8 [ + , - , VOL ] For switching the remote control to 2 To adjust the volume . TUNER mode and selecting TUNER . [ MUTING ] After selecting TUNER , press and hold To mute the volume . to switch between FM and AM . 3 [ 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 0 ] 3 8 9 [ TUNER DIRECT TUNING ] To enter radio frequencies and To enable selection of radio stations by channels . 4 frequency . [ 10 ] ≧ 5 To enter two digit channels . 10 [ OFF ] [ - AUTO SETUP ] 4 To cancel Dolby Pro Logic and SFC . ΙΙ For auto speaker setup . [ ] PL 9 For selecting a Dolby Pro Logic mode : ΙΙ [ , , , , SKIP ] u 2 i 1 5 MOVIE , MUSIC or PANORAMA . For selecting preset radio channels . [ MUSIC ] ― C.FOCUS ] [ - EFFECT , 6 For selecting SFC modes : Use when adjusting Dolby Pro Logic ΙΙ LIVE , POP / ROCK , VOCAL , JAZZ , effects . DANCE or PARTY . Press and hold to select center focus [ MOVIE ] 6 mode . For selecting SFC modes : [ - , + ] 10 DRAMA , ACTION , SPORTS , MUSICAL , First select [ - EFFECT ] or [ - LEVEL , GAME or MONO . RQTX0175 — TEST ] , then press [ - ] or [ + ] to adjust . ― TEST ] [ - LEVEL , Use when adjusting speaker level . Press and hold to start the speaker test signal . 4 SC - HT56P_MP ( RQTX0175 - 2P ) . indb 4 9 / 19 / 2008 12 : 27 : 55 PM
Page: 5

Control guide Main unit 1 2 3 4 5 6 7 guide Control 8 9 10 [ AUTO SPEAKER SETUP ] 5 Standby indicator [ ^ ] 1 Flashes during Auto Speaker Setup . Lights when the setup When the unit is connected to the AC power supply , this finishes . indicator lights up in standby mode and goes out when the [ INPUT SELECTOR , < , > ] 6 unit is turned on . For selecting input . [ , POWER ] 8 [ VOLUME ] 7 Press to switch the unit from on to standby mode or vice Volume control . versa . In standby mode , the unit is still consuming a small [ ] Headphone jack 8 amount of power . 1 / 8 Ø3.5 mm ( " ) stereo Plug type : ― SETUP , [ - MENU , RETURN ] 2 • Sound does not come from the speakers if you connect • For entering menus and setup to make various settings . headphones . • For returning to previous menus . • Avoid listening for prolonged periods of time to prevent [ TUNE , / , / 4 ] 2 3 1 3 hearing damage . For tuning the radio and selecting menu or setup items . [ SETUP MIC ] jack 9 [ ENTER ] 4 For calibration microphone . Used during menu or setup operations . Remote control signal sensor 10 Display 1 2 3 4 TUNED ST MONO SLEEP C.FOCUS PCM 5 W M DIGITAL INPUT 6 DIGITAL DTS ft SFC 7 kHz PL 2CH MIX MHz 8 9 10 6 [ TUNED , ST , MONO ] [ DIGITAL , DTS , PL Ι ] % % Ι 1 Radio indicators Lights to indicate the source's input signal and decoding format used . TUNED : A station is tuned DIGITAL : Dolby Digital sources % ST : A stereo FM broadcast is tuned DTS : DTS sources MONO : You have switched to monaural mode to improve PL : Dolby Pro Logic decoder is being used % ΙΙ ΙΙ reception [ SFC , 2CH MIX ] 7 [ SLEEP ] 2 SFC : Appears when you are using an SFC mode Sleep timer indicator . 2CH MIX : Appears when you are listening to a multi - channel source with headphones General display 3 [ M ] 8 Shows the input mode , radio frequency and other general Flashes or lights during presetting . information . [ ft , kHz , MHz ] [ PCM , C.FOCUS ] 9 4 Distance and frequency unit indicators PCM : Lights when the PCMFIX mode is set ft : feet ( speaker distance ) RQTX0175 C.FOCUS : Appears when you are using Center Focus kHz : AM , or PCM sampling frequency [ DIGITAL INPUT ] 5 MHz : FM Lights when input is digital . [ W ] 10 ( ➡ Lights when you are using the digital transmitter page 7 ) . 5 Flashes when there is no link between the main unit and the wireless system ( For details , refer to the operating instructions for SH - FX67 ) . SC - HT56P_MP ( RQTX0175 - 2P ) . indb 5 9 / 19 / 2008 12 : 27 : 59 PM
Page: 6

Speaker setup 1 STEP Speaker cables 1 Speaker sticker sheet ( 3 short , 2 long ) 6 1 2 3 4 5 Supplied WOOER F cLh cRh ch ch L R TNE R CE SUB FRO NT NT FRO ND OU SURR OUND SURR SUB URR UND URR UND R FRONT S O S O F ONT TRE CEN cLh Rch EWOOFR Lch Rch 6 5 3 4 1 2 1 2 3 4 6 5 FER WOO Lch ch R Lhc Rch TNE R CE ON FRONT T FR UND RO SU SUB ND SURRO R U accessories F ONT F O NT R R S RO ND S ROUND UB UR U UR S CENTER Rch Lch Lch R ch W OFER O 6 5 1 2 3 4 setup Placement of speakers . Placement of speakers Speaker Place the front , center , and surround speakers at approximately Center speaker Front the same distance from the seating position . Front speaker Auto Speaker Setup compensates for any differences speaker ( R ) ( ➡ pages 11 to 12 ) . ( L ) The angles in the diagram are approximate . Surround Subwoofer speaker Front speakers ( left , right ) ( R ) Place on the left and right of the TV at seated ear height so that there is good coherency between the picture and sound . Center speaker lace underneath or above the center of the TV . Aim the P speaker at the seating area . Surround speakers ( left , right ) Place on the side of or slightly behind the seating area , higher than ear level . Surround Subwoofer speaker The subwoofer can be placed in any position as long as it is at a ( L ) reasonable distance from the TV . Note that some experimentation can yield the smoothest low Positioning for best effect frequency performance . Placement near a corner can increase How you set up your speakers can affect the bass and the the apparent output level , but can result in unnatural bass . sound field . Note the following points . Note 13 • Place speakers on flat secure bases . " ) Keep your speakers at least 10 mm ( / away from the 32 • Placing speakers too close to floors , walls , and corners can system for proper ventilation . result in excessive bass . Cover walls and windows with a thick curtain . Connect the speakers to the receiver Attach the speaker - cable stickers to make connection easier . Be careful not to Speaker - cable sticker cross ( short - circuit ) or reverse the polarity of the speaker wires as doing so may Insert the wire fully . amage the speakers . d SURROUND ( R ) CENTER Push ! SURROUND ( L ) SURROUND SURROUND Lch Lch 3 3 FRONT ( R ) SUB WOOFER 6 FRONT ( L ) RQTX0175 not insert the Do wires beyond the wire insulation . + : White − : White ( Blue line ) 6 SUBWOOFER SC - HT56P_MP ( RQTX0175 - 2P ) . indb 6 9 / 19 / 2008 12 : 28 : 03 PM
Page: 7

Turn off all components before making any connections . • Peripheral equipment and cables sold separately • unless otherwise indicated . To connect equipment , refer to the appropriate • operating instructions . 1 Other speaker setup options TEP Plate thickness plus ■ Fitting optional speaker stands Example : Surround speaker 9 S 32 " ) / to 7.0 mm ( ( For front , center and surround speakers ) 13 Metal screw 32 " ) / 10 mm ( Ensure the stands meet these conditions before purchasing them . hole Note the diameter and length of the screws and the distance between For attaching setup to speaker screws as shown in the diagram . stands . Speaker stand kg • The stands must be able to support over 10 ( 22 lb . ) . ( not included ) • The stands must be stable even if the speakers are in a high position . r 3 1 Speake 16 32 " ) / " ) , pitch 0.8 mm ( / 5.0 mm ( ■ Attaching to a wall You can attach the surround , center and front speakers to a wall . kg The wall or pillar on which the speakers are to be attached should be capable of supporting 10 • ( 22 lb . ) per screw . Consult a qualified building contractor when attaching the speakers to a wall . Improper attachment may result in damage to the wall and speakers . 1 2 Drive the screw ( not included ) into the wall Fit the speaker securely onto the screw ( s ) with the hole ( s ) Center speaker 3 16 " ) At least 30 mm ( 1 / Front speakers 9 5 32 " ) 32 " ) Ø7.0 mm ( / Ø4.0 mm ( / 190 mm 11 15 32 " ) 32 " ) / to 9.4 mm ( / ( 7 Wall or pillar 5 32 " ) / 4.0 mm ( 1 / 4 " ) to 6.0 mm ( Surround speaker If irregular coloring occurs on your television Caution The supplied speakers are designed to be used close to a • Use the speakers only with the recommended television , but the picture may be affected with some televisions system . Failure to do so can damage the and setup combinations . amplifier and speakers , and can cause fire . If this occurs , turn the television off for about 30 minutes . Consult a qualified service person if damage The television's demagnetizing function should correct the occurs or if a sudden change in performance problem . If it persists , move the speakers further away from the is apparent . television . • Do not attempt to attach these speakers Notes on front speakers to walls using methods other than those These speakers do not have magnetic shielding . Do not place described in this manual . them near televisions , personal computers or other devices easily influenced by magnetism . Wireless system connection Digital transmitter cover Set your sound free with Panasonic’s wireless PUSH PUSH receiver and speaker systems DIGITAL Attach the SH - FX67 digital transmitter for wireless surround sound . PUSH PUSH TRANSMITTER Push ! Push ! You can also connect your portable audio equipment to the wireless system . For details , refer to the operating instructions for SH - FX67 . Note RQTX0175 Remove the digital transmitter cover before installing any optional Rear panel of the main unit Panasonic wireless accessory . You can use the blunt end of a writing instrument • Replace the cover when the digital transmitter is not in use . to push here until the cover pops out . 7 SC - HT56P_MP ( RQTX0175 - 2P ) . indb 7 9 / 19 / 2008 12 : 28 : 08 PM
Page: 8

Home theater connections 2 TM STEP HDMI and VIERA Link “ HDAVI Control ” High - quality audio and video simply with HDMI connection • The HDMI ( High Definition Multimedia Interface ) connection means you only need one cable to transmit digital audio and video between two pieces of equipment . HDMI Cable ( not included ) ( Use a Panasonic HDMI cable for best results . ) connections • It is recommended that you use Panasonic’s HDMI cable . , Recommended part number : RP - CDHG10 ( 1.0 m / 3.3 ft . ) RP - CDHG15 ( 1.5 m / 4.9 ft . ) , RP - CDHG20 ( 2.0 m / 6.6 ft . ) , RP - CDHG30 ( 3.0 m / 9.8 ft . ) , RP - CDHG50 ( 5.0 m / 16.4 ft . ) , etc . • Non - HDMI - compliant cables cannot be utilized . Rear panel BD player / Note theater DVD recorder DVD HDMI Connect only DVD equipment to ( AV OUT ) the HDMI input terminal of the unit . TV HDMI Connecting other equipment may V IN ) ( A e prevent the output of sounds or show DVD Homplayer DVD HDMI distorted pictures . ( AV OUT ) Audio and video signal flow when you have used HDMI connections The audio and video signals from DVD equipment pass through to the television even if this unit is set to standby . TV TV When this When this unit is in unit is on standby mode ( in standby ON condition , page 14 ) ➡ udio Video Video A Audio Audio VOLUME INPUT SELECTOR VOLUME INPUT SELECTOR MENU MENU TUNE TUNE SETUP ETUP S ENTER ENTER RETURN RETURN SETUP MIC SETUP MIC rs Speake This unit Speakers This unit udio Video A Video Audio DVD equipment DVD equipment For your reference • Audio signals from HDMI connection takes priority to digital terminal connections ( page 9 ) . ➡ • This unit’s HDMI can carry video signals up to 1125p ( 1080p ) ( even when this unit is in standby mode ) . 1125p : a progressive ( non - interlace ) scanning system that sends 1,125 scan lines every 1 / 60 second . • Please use High Speed HDMI Cables that have the HDMI logo ( as shown on the cover ) . • When outputting 1080p signal , please use the HDMI cables 16.4 feet or less . Using the VIERA Link “ HDAVI Control ” What is VIERA Link “ HDAVI Control ” ? TM TM VIERA Link is a new name for EZ Sync . VIERA Link “ HDAVI Control ” is a convenient function that offers linked operations of this system , and a Panasonic TV ( VIERA ) or DVD recorder ( DIGA ) under “ HDAVI Control ” . You can use this function by connecting the equipment with the HDMI cable . See the operating instructions for connected equipment for operational details . VIERA Link “ HDAVI Control ” , based on the control functions provided by HDMI which is an industry standard known as HDMI • CEC ( Consumer Electronics Control ) , is a unique function that we have developed and added . As such , its operation with other manufacturers ’ equipment that supports HDMI CEC cannot be guaranteed . This system supports “ HDAVI Control 2 ” function . • “ HDAVI Control 2 ” is the newest standard ( current as of February , 2007 ) for Panasonic’s HDAVI Control compatible equipment . This standard is compatible with Panasonic’s conventional HDAVI equipment . • Please refer to individual manuals for other manufacturers ’ equipment supporting VIERA Link function . Preparation 1 . Connect your other Panasonic home theater equipment ( VIERA Link “ HDAVI Control ” compatible VIERA television or DIGA DVD recorder ) with an HDMI cable ( above ) . 2 . Read your television’s operating instructions and make the settings necessary to activate theVIERA Link “ HDAVI Control ” . 3 . Switch on all your equipment , then switch your television off then on again and check that images from DIGA appear correctly . ( Do this whenever you change connections or settings . ) Rear panel TV HDMI V 175IN ) ( A DVD recorder TV ( VIERA ) DIGITAL PUSH PUSH RQTX0 ( DIGA ) TRA NSMITTER VD HDMI D DIGITAL AUDIO ( AV OUT ) OUT ( OPTICAL ) 8 • To take advantage of the multi - channel sounds now available with digital television , use a digital connection if your TV has a digital output terminal . • To turn off VIERA Link “ HDAVI Control ” , “ HDMI settings ” , page 14 . ➡ SC - HT56P_MP ( RQTX0175 - 2P ) . indb 8 9 / 19 / 2008 12 : 28 : 11 PM
Page: 9

Turn off all components before making any connections . • Peripheral equipment and cables sold separately • unless otherwise indicated . To connect equipment , refer to the appropriate • operating instructions . 2 STEP Stereo connection cable Optical fiber cable Coaxial cable Other Left accessories Right connections Note • Notes on digital input • Use digital connection to enjoy Dolby Digital or DTS . This unit can decode the following signals : • Do not bend the optical fiber cable . • Dolby Digital , DTS • PCM , including PCM with sampling frequencies of 96 kHz or 88.2 ckHzode : theater It cannot de • Other digital signals , such as MPEG • Dolby Digital RF signals from a laser disc player Home TV , BD player / DVD recorder and DVD player BD player / DVD recorder BD / DVR Connect the IN video cable L directly to the TV . AUDIO OUT R VOLUME INPUT SELECTOR VOLUME INPUT SELECTOR MENU MENU TUNE TUNE SETUP ETUP S ENTER ENTER RETURN RETURN SETUP MIC SETUP MIC IN VIDEO OUT VIDEO OPT 2 DIGITAL AUDIO OUT BD / DVR TV ( Monitor ) Coaxial R COAXIAL LADIGITALL TDIGITA DIGI PUSH PUSH PUSH PUSH TRA RENSMITTERR TNSMITTE TRA NSMIT OUT AUDIO DIGITAL DVD - P DVD player TV DVD - P IN Connect the IN L L video cable FRONT ( L , R ) directly to AUDIO OUT R R AUDIO OUT the TV . VIDEO OUT OPT 1 RQTX0175 IN VIDEO DIGITAL AUDIO OUT TV 9 TV ( Monitor ) TV DVD player SC - HT56P_MP ( RQTX0175 - 2P ) . indb 9 9 / 19 / 2008 12 : 28 : 15 PM
Page: 10

Turn off all components before making any connections . • Peripheral equipment and cables sold separately • unless otherwise indicated . Antenna and AC power To connect equipment , refer to the appropriate • operating instructions . supply connections 3 STEP 1 AC power supply cord 1 FM indoor antenna AM loop antenna 1 Supplied accessories connections FM outdoor antenna For best reception FM indoor antenna Adhesive tape FM outdoor antenna Fix the end of the antenna where • Disconnect the FM indoor reception is best . antenna . • The antenna should be supply installed by a competent technician . power AC and 75 coaxial cable Ω Antenna plug Antenna Click ! 2 AM loop antenna 1 Black 3 White Red Keep the antenna cord away from DVD players and other cords . DIGITAL PUSH PUSH TRA NSMITTER AC IN ~ 2 The cooling fan operates at high power output levels only . 1 AC power supply cord Connect this cord after all other cables are connected . Household AC outlet ( AC 120 V / 60 Hz ) AC IN ~ Conserving power he unit consumes 0.7 W ( in HDMI standby on condition ) even when it is turned off with [ ] . T 8 To save power when the unit is not to be used for a long time , unplug it from the household AC outlet . You will need to reset some memory items after plugging in the unit . RQTX0175 Note • The included AC power supply cord is for use with this unit only . Do not use it with other equipment . • Do not use an AC power supply cord from other equipment . 10 SC - HT56P_MP ( RQTX0175 - 2P ) . indb 10 9 / 19 / 2008 12 : 28 : 19 PM
Page: 11

Turn off all components before making any connections . • Peripheral equipment and cables sold separately • unless otherwise indicated . To connect equipment , refer to the appropriate • Auto speaker setup operating instructions . 4 Auto speaker setup allows you to achieve a satisfactory listening environment easily with the use of the supplied calibration microphone STEP as a detector of sound signals . The unit will first perform automatic speaker detection , then checks and adjusts the following settings . DETECTION • Checks which speakers you have connected . setup speaker • ks the distance of each speaker from the listening position and adjusts the Chec DISTANCE timing of each channel automatically . Auto FREQUENCY • es any further corrections to the frequency response . Mak LEVEL Checks • and adjusts each speaker level automatically . Loud test tones are output from the speakers during setup , so keep children out of the room . 2 1 Before setup Conduct the auto speaker setup in a quiet environment . A noisy background will give unsatisfactory results . Process for auto speaker setup 3 Turn on the unit . . Press  • The standby indicator goes off when you turn on the unit . DIGITAL PUSH PUSH TRA NSMITTER Note Connect the calibration The calibration microphone is sensitive to  AC IN ~ microphone to the heat . Keep it away from direct sunlight and [ SETUP MIC ] jack on do not place it on top of the unit . the front panel . 2 Calibration microphone ( included ) 1 Placing of calibration Place • on a flat surface at the seating area .  microphone . • Set calibration microphone position at your ear height . AC IN ~ RQTX017511 SC - HT56P_MP ( RQTX0175 - 2P ) . indb 11 9 / 19 / 2008 12 : 28 : 24 PM
Page: 12

Turn off all components before making any connections . • Peripheral equipment and cables sold separately • unless otherwise indicated . To connect equipment , refer to the appropriate • Auto speaker setup operating instructions . 4 STEP - AUTO SETUP a ) Press and hold . Start performing auto  speaker setup . • [ AUTO SPEAKER SETUP ] indicator starts flashing . AUTO AUTO SPEAKER SETUP SPEAKER SETUP setup • “ AUTO SETUP ” appears on the display . b ) The unit checks that you have correctly speaker connected the calibration microphone . c ) The automatic setup starts with STEP 1 , STEP 2 , and STEP 3 calibration as follows . STEP1 – DETECTION / DISTANCE STEP2 – FREQUENCY STEP3 – LEVEL   Auto For your reference • Loud test tones are output from each speaker during the configuration . • During setup , operations may stop when there is an error message on the display . Refer below for troubleshooting . “ COMPLETE ” appears on the display and all calibrations are saved . • Auto speaker setup finishes .  [ AUTO • SPEAKER SETUP ] indicator lights . - AUTO SETUP • To exit , press and hold . • Disconnect the calibration microphone . To cancel during setup Press any button on the main unit or remote control . “ CANCELED ” appears on the display . Note • Perform auto speaker setup again if you have changed the speakers , speaker positions , or the layout of your listening environment . • If you find speaker output unsatisfactory , reset all auto speaker setup settings and change them manually . Refer to “ Auto setup ” ( page 13 ) . ➡ • The calibration will give optimal result for “ DISTANCE ” . Therefore , you are unable to adjust the setting manually . Troubleshooting for auto speaker setup While performing auto speaker setup , errors may occur and the messages will blink or scroll on the display , depending on the conditions . Press any button on the main unit or remote control to stop the setup . - AUTO SETUP After troubleshooting , press and hold to start the setup process again . Message Solutions Pages • ation microphone is not detected . Insert the microphone correctly . 11 “ INSERT MIC ” Calibr “ CHECK CONNECTION TO One of the surround speakers • is not detected . Check the connections . 6 LS / RS SPEAKERS ” • k the front ( L ) and ( R ) connections . 6 “ CHECK CONNECTION TO Chec L / R SPEAKERS ” Note • Auto speaker setup may produce an unsatisfactory result with some speaker setups and configurations . • Auto speaker setup will not start if you have muted the speakers . Turn the muting off ( page 19 ) . ➡ • Auto speaker setup will not start if you have plugged in headphone . Unplug any headphone . RQTX0175 TM ” ( page 8 ) is disabled during auto speaker setup . • VIERA Link “ HDAVI Control ➡ 12 SC - HT56P_MP ( RQTX0175 - 2P ) . indb 12 9 / 19 / 2008 12 : 28 : 28 PM
Page: 13

Display Settings Switch on . Change the settings to suit your equipment to the environment in which you are using it . Before making any changes , read the descriptions of the settings , note the factory settings and ranges , and refer to the equipment's instructions . Enter the Select the item you want to change . Change the Exit the 1 2 3 4 setup mode . setting . setup mode . Settings Select and press [ ENTER ] . 2a DISTANCE AUTO SETUP INPUT ↔ ↔ Press to change the Press repeatedly MODE HDMI DRCOMP ↔ ↔ ↔ setting . until “ EXIT ” appears . ATTENUATOR REMOTE TV DELAY ↔ ↔ ↔ RESET EXIT ↔ • efer to pages 13 and 14 for each item settings . R Press and hold . • For “ REMOTE ” , refer to page 21 . Press once to enter . Press [ ENTER ] to • For “ RESET ” , refer to page 19 . completely exit the Select and press [ ENTER ] . 2b setup mode . Note Auto speaker setup calibration will give optimal result for “ DISTANCE ” . Therefore , you are unable to adjust the setting manually . 2a 2b 3 • the distance of the front , center and surround speakers from Enter DISTANCE LR Distance the seating position . 3 feet to C 30 feet Change the distance so that the sound from all the speakers ( except for the S subwoofer ) reaches you at the same time . You can select distances between 3 feet and 30 feet . Repeat for each speaker channel The factory settings are : 10 ft ( feet ) LR ( front ) : 10 ft ( feet ) C ( center ) : 5 ft ( feet ) S ( surround ) : • Reset the settings done in auto speaker setup . UTO SETUP DEFAULT NO A Auto setup YES YES : Reset all auto speaker setup settings NO : To cancel ( factory setting ) • This unit automatically detects whether input is digital or INPUT MODE TV Input mode analog , but you can fix the input mode . AUTO AUTO : The unit automatically detects whether input is digital or analog . DVR ANALOG ( factory setting ) DIG ANALOG : Select to make the unit accept analog input . PCMFIX DIG : Select to make the unit accept digital input . DVD 1 PCMFIX : Select to input to PCM . 1 In rare cases , the unit may have trouble recognizing PCM signals and this may cause the beginning of tracks to be cut off . Select “ PCMFIX ” if this occurs . • With DTS , the signals may not be recognized at all . Engage the DTS FIX mode if this occurs . To engage the DTS FIX mode : Press and hold [ - MENU ] and [ ENTER ] at the same time . “ DTS ” lights . To cancel the DTS FIX mode : Press and hold [ - MENU ] and [ ENTER ] at the same time . RQTX0175 The mode cancels when input mode is set to AUTO or when the unit is turned off . Note hen a FIX mode is on , the unit cannot process other signals . This may cause noise to be output . If this occurs , select an W input mode other than PCMFIX , or cancel the DTS FIX mode . 13 ( continue on next page ) SC - HT56P_MP ( RQTX0175 - 2P ) . indb 13 9 / 19 / 2008 12 : 28 : 32 PM
Page: 14

Display Settings Switch on . 2a 2b 3 HDMI STNBY • To reduce standby power consumption . HDMI settings TM • Choice for turning off the VIERA Link “ HDAVI Control ” ( page 8 ) . ➡ Settings Standby selection VIERA Link “ HDAVI Control ” OFF : Standby power consumption reduced OFF : VIERA Link “ HDAVI Control ” OFF ( approximately 0.3 W ) . is OFF ON ON : VIERA Link “ HDAVI Control ” CTRL • Signals from DVD equipment cannot pass is ON ( factory setting ) through HDMI connection to the television when the unit is in standby ( page 8 ) . ➡ • VIERA Link “ HDAVI Control ” ( page 8 ) ➡ does not work when the unit is in standby . ON : Normal standby power consumption ( factory setting ) DRCOMP OFF ( Dynamic range compression ) DRCOMP • Change this setting to listen to software recorded with Dolby Digital at low volume ( such as late at night ) and maintain audio STANDARD clarity . It reduces the peak level in loud scenes without affecting the sound field . OFF : The software is played with the original dynamic range ( factory setting ) . MAX STANDARD : The level recommended by the producer of the software for household viewing . MAX : The maximum allowable compression ( recommended for night viewing ) . ATTENUATOR OFF ( A / D Attenuator ) Attenuator • Turn the A / D attenuator on if “ OVERFLOW ” lights frequently ON when using 2 - channel analog input . The factory setting is OFF . • Delay audio if there appears to be a difference in timing between TV DELAY OFF TV delay audio and pictures . The factory setting is ON . ON Adjusting speaker output level C ( center ) , RS ( surround right ) and LS ( surround left ) can be adjusted between - 6 dB and VOL + 6 dB , with 0 dB being the level of the front speakers . Adjust center and surround output to the same apparent level of the front speakers . For SUBW ( subwoofer ) , you can select “ SUBW OFF ” so there is no output , “ SUBW MIN ” for minimum output , a level between 1 and 19 , or “ SUBW MAX ” for maximum output . Adjust subwoofer output so it is balanced with the front speakers . Output the signal . Adjust the main Select the speaker Adjust the level . Stop the test volume . channel . signal . VOL RQTX0175 Press and hold . Press and hold . C + 4dB TEST L L C R RS LS SUBW 14 Repeat for each speaker channel SC - HT56P_MP ( RQTX0175 - 2P ) . indb 14 9 / 19 / 2008 12 : 28 : 35 PM
Page: 15

Basic operations 1 2 3 4 operations Start play of the source . Select input . The unit sets the soundut Switch on . mode to suit the inp TUNER FM TUNER AM TV signal . Basic Adjust the volume . DVD - P BD / DVR Adding surround effects to stereo sources Using Dolby Pro Logic MOVIE ΙΙ Use this mode when playing movie software recorded in Dolby Dolby Pro Logic processor works not only on ΙΙ Surround . sources recorded with Dolby Surround , but also PL MUSIC on any stereo source . Adds surround effects to stereo sources . PL Press to select a mode from the table at PANORAMA ound is spread out more so you feel like you are surrounded by S right . music . • To cancel , press [ OFF ] . nd You can make fine surrou settings when in the MUSIC or PANORAMA mode . ( page 18 ) ➡ Using the Sound Field Control ( SFC ) LIVE Brings you up close for “ live ” stage performance and smoother Enjoy an enhanced sound experience with vocals . greater presence and spread by using these SFC POP / ROCK modes with PCM or analog stereo sources . For pop , rock , and other music that has a punch to it . VOCAL Press to select a mode from the For adding gloss to vocals . MUSIC tables at right . JAZZ • To cancel , press k [ OFF ] . er Conveys the exciting and intimate atmosphere of a jazz club . You can change the spea level of SFC . DANCE ( page 18 ) ➡ For dance music and other sounds with a strong beat . PARTY mode uses the front and surround speakers so that sound is in This stereo regardless of the direction you are facing . Note • Dolby Pro Logic and SFC modes remain in ΙΙ DRAMA effect until you turn the mode off . For dramas and other material where dialog is important . • When input is PCM with sampling frequencies ACTION of 96 kHz or 88.2 kHz , you cannot add For action movies and other material where impact is important . surround effects with Dolby Pro Logic or ΙΙ SFC . SPORTS To make you feel like you were in the stadium . • When input is Dolby Digital or DTS , you can MOVIE use SFC . RQTX0175 MUSICAL For musicals and other material where music is important . GAME Enjoy gaming with more impact . 15 MONO For monaural sound . SC - HT56P_MP ( RQTX0175 - 2P ) . indb 15 9 / 19 / 2008 12 : 28 : 41 PM
Page: 16

Display MENU operation This is an outline of the operations you can perform with the MENU . Press [ MENU ] once . - 1 2 4 5 3 Main menu Sub menu 1 Sub menu 2 Exit operation TUNER FM MODE AUTO Press Press The radio page 17 ( TUNER FM only ) ➡ MENUMONO repeatedly [ ENTER ] to until “ EXIT ” completely MEMORY MEMO CH 1 appears . exit the MEMO CH30 menu mode . EXIT START AUTO MEMO CANCEL MANUAL TUNE MODE PRESET BEAT PROOF MODE 1 ( TUNER AM only ) MODE 2 BASS 0 BASS - 6 Adjust the bass page 18 ➡ BASS + 6 TREBLE 0 TREBLE - 6 Adjust the treble page 18 ➡ TREBLE + 6 Press Press repeatedly [ ENTER ] to L R BALANCE until “ EXIT ” completely appears . exit the can adjust the balance of You menu mode . the front speakers page 18 ➡ EXIT DIMMER OFF DIMMER OFF Dim the display for better DIMMER 1 viewing in a darkened room page 19 ➡ DIMMER 2 DIMMER 3 SLEEP OFF SLEEP OFF The SLEEP timer can turn the SLEEP 30 unit off after a set time SLEEP 60 page 19 ➡ SLEEP 90 RQTX0175 SLEEP 120 16 SC - HT56P_MP ( RQTX0175 - 2P ) . indb 16 9 / 19 / 2008 12 : 28 : 45 PM
Page: 17

The radio 1 2 radio The Press [ INPUT SELECTOR < or > ] Select the frequency . to select “ TUNER FM ” or “ TUNER Auto tuning starts if you press and AM ” . hold the button . Direct tuning Manual presetting Preset the stations one at a time . Input the frequency of the station . Preparation : Tune to the station you want to preset . Remote control Main unit ― BAND ] 1 . Press [ TUNER , to select “ TUNER ” . ― BAND ] 2 . Press and hold [ TUNER , to select “ TUNER 1 . Press [ - MENU ] to select “ TUNER ” “ MEMORY ” . ➡ FM ” or “ TUNER AM ” . 2 . Press [ TUNE / - or / + ] to select the channel 2 1 3 . Press [ TUNER DIRECT TUNING ] . [ ENTER ] . ➡ 4 . Press the numbered buttons to enter the ( “ STORED ” lights . ) frequency . e.g . To select 107.9 MHz , press [ 1 ] [ 0 ] [ 7 ] [ 9 ] → → → For your reference • If you do not press a button while the cursor is flashing , the FM stations can also be preset in the MONO mode . display returns to the frequency being received . • If the frequency has not been input correctly , “ ERROR ” will be Selecting channels displayed . Remote control Automatic presetting ― BAND ] 1 . Press [ TUNER , to select “ TUNER ” . [ SKIP , i , u 2 1 ] . 2 . Press or The FM stations the unit can receive are preset in channels 1 to or 30 . The AM stations the unit can receive are preset in channels Press the numbered buttons . 21 to 30 ( FM stations are replaced if any were preset in these For channels 1 to 9 , press the corresponding number . channels ) . For channels 10 or over , press [ 10 ] , then the two digits . ≧ Preparation : Tune to either FM 87.9 MHz or AM 530 kHz . e.g . To select channel 21 : [ 10 ] [ 2 ] [ 1 ] ≧ → → Main unit Main unit 1 . Press [ - MENU ] to select “ TUNER ” “ AUTO ➡ MEMO ” . 1 . Press [ - MENU ] to select “ TUNER ” “ TUNE ➡ 2 . Press [ TUNE / - or / + ] to select “ START ” 2 1 MODE ” . [ ENTER ] . ➡ 2 . Press [ TUNE / - or / + ] to select “ PRESET ” 2 1 Select “ CANCEL ” to cancel . [ ENTER ] . ➡ Select “ MANUAL ” to cancel . The tuner presets all the stations it can receive into the channels 3 . After exiting the menu : in ascending order . Press [ TUNE / - or / + ] . 2 1 During automatic presetting , the memory indicator ( M ) flashes and the frequency scrolls . The memory indicator and channel numbers are displayed for a second when a station is preset . The last station to be preset is displayed when presetting finishes . Reducing excessive noise During FM stereo reception During AM reception When there is a lot of noise interference with an AM broadcast , You can improve FM reception by switching reception to RQTX0175 try switching this mode . monaural . Main unit Main unit ➡ ➡ 1 . Press [ - MENU ] to select “ TUNER ” “ FM MODE ” . 1 . Press [ - MENU ] to select “ TUNER ” “ BEAT 17 2 . Press [ TUNE / - or / + ] to select “ MONO ” PROOF ” . 2 1 ➡ 2 . Press [ TUNE / - or / + ] to select “ MODE 1 ” or [ ENTER ] . 2 1 Select “ AUTO ” to cancel . ➡ “ MODE 2 ” [ ENTER ] . SC - HT56P_MP ( RQTX0175 - 2P ) . indb 17 9 / 19 / 2008 12 : 28 : 47 PM
Page: 18

6 4 5 VOLUME Sound field 7 8 9 - / - - SUBWOOFER > = 10 0 SKIP SLOW / SEARCH i t y u STOP PAUSE PLAY g h q FUNCTIONS DIRECT NAVIGATOR TUNER TOP MENU DIRECT TUNING OK RETURN SUB MENU S - EFFECT - LEVEL C.FOCUS - EFFECT - LEVEL TEST C.FOCUS TEST field OFF PL MUSIC MOVIE SFC SURROUND Sound Balance Adjusting the tone You can adjust the balance of the front speakers . You can adjust the level of the bass and treble . Main unit Main unit 1 . Use the menus to select “ BALANCE ” . 1 . Use the menus to select “ BASS ” or “ TREBLE ” . MENU operation on page 16 . ➡ MENU operation on page 16 . ➡ 2 . Press [ TUNE / - or / + ] to adjust the balance . 2 1 2 . Press [ TUNE / - or / + ] to adjust the tone . 2 1 Center focus Input signals must be either analog or PCM , and Dolby Pro Use with discs where the dialogue is recorded in the center Logic and SFC must be off ( ➡ ) . ΙΙ page 15 channel . You can make the sound of the center speaker seem like it is Dimension Control “ DIMEN ” coming from within the television . can adjust the effect of the Dolby Pro Logic MUSIC and You ΙΙ PANORAMA modes ( page 15 ) . ➡ Remote control ― C.FOCUS ] . Press and hold [ - EFFECT , can make up for differences in the output level of the front You “ C.FOCUS ” lights . and surround speakers . The factory setting is off . You can choose a level between - 3 and + 3 : Increase the level to move sound to the front speakers , decrease to move it to the You cannot use this when the sound mode is STEREO . surround speakers . The factory setting is 0 . Adjusting SFC Remote control You can adjust the sound field by adjusting the level of the speakers . This adjustment can be made for each SFC mode ― C.FOCUS ] 1 . Press [ - EFFECT , to select “ DIMEN ” . ( page 15 ) . ➡ 2 . Press [ - ] or [ + ] to adjust the effect . Remote control Center Width Control “ C - WDTH ” ― TEST ] 1 . Press [ - LEVEL , to select the speaker You can adjust the effect of the Dolby Pro Logic MUSIC and ΙΙ channel . PANORAMA modes ( page 15 ) . ➡ Each time you press the button : C RS LS SUBW → → → adjustment helps you realize a more natural sound image This when listening to music . Move sound out into the front speakers to improve the overall front image , or add sound to the center 2 . Press [ - ] or [ + ] to adjust the level . speaker to fix the center image . C , RS , and LS : - 6 dB to + 6 dB You can choose a level between 0 ( the center speaker is SUBW : OFF MIN 1 - 19 MAX ↔ ↔ ↔ dominant ) and 7 ( center sound is spread out ) . The factory setting is 3 . RQTX0175 Remote control ― C.FOCUS ] 1 . Press [ - EFFECT , to select “ C - WDTH ” . 2 . Press [ - ] or [ + ] to adjust the effect . 18 SC - HT56P_MP ( RQTX0175 - 2P ) . indb 18 9 / 19 / 2008 12 : 28 : 58 PM
Page: 19

Other functions function RESET functions / The Sleep timer Muting The SLEEP timer can turn the unit off after a set time . Remote control It does not control any other components . Other Press [ MUTING ] . Main unit To cancel 1 . Use the menus to select “ SLEEP ” . Press [ MUTING ] again . MENU operation on page 16 . ➡ Muting also cancels when you adjust the volume or switch the 2 . Press [ TUNE / - or / + ] to select the time 2 1 unit to standby . ( in minutes ) . The display changes as follows : Dimmer SLEEP OFF SLEEP 30 SLEEP 60 SLEEP 90 ↔ ↔ ↔ Dim the display for better viewing in a darkened room . SLEEP 120 ↔ Main unit To check the setting 1 . Use the menus to select “ DIMMER ” . 1 . Press [ - MENU ] to enter the main menu . MENU operation on page 16 . ➡ 2 . Press [ TUNE / - or / + ] to select “ SLEEP ” . 2 1 2 . Press [ TUNE / - or / + ] to select the level 2 1 The time remaining appears . ( 1 , 2 , or 3 ) or OFF . To change the setting Repeat the procedure from the beginning . The RESET function The operation settings for the unit will be initialized to the settings made at the time of shipment . However , any preset radio stations will not be erased . [ ― 1 . Press and hold SETUP ] to enter the setup menu . RQTX017519 2 . Press [ TUNE / - or / + ] to select “ RESET ” [ ENTER ] . 2 1 ➡ 3 . Press [ TUNE / + ] to select “ RESET YES ” [ ENTER ] . 1 ➡ To cancel , select “ RESET NO ” . SC - HT56P_MP ( RQTX0175 - 2P ) . indb 19 9 / 19 / 2008 12 : 29 : 01 PM
Page: 20

Remote control operation guide This remote control can operate Panasonic DVD recorders , DVD players , and televisions . Note that this remote control cannot operate some equipment and that it may not be able to perform some operations . Before using a Panasonic DVD recorder or player DVD recorder Change the remote control code to match the remote control mode of the DVD recorder . 1 . Check the remote control mode of the DVD recorder . 2 . For about one second hold down both [ OK ] and the numbered button ( [ 1 ] , [ 2 ] or [ 3 ] ) ( the same as the remote control mode of the DVD recorder ) . The factory setting is [ 1 ] . DVD player Change the remote control code so you can operate a DVD player . For about one second hold down both [ OK ] and [ 4 ] . guide Watching DVDs / TV operation Switch on ^ Switch on the television and select input control ^ Remote Switch on the player and start play Switch off ^ ^ Operating the DVD recorder / DVD player DIRECT NAVIGATOR Show disc menus MENU Start play from a selected item Show disc menus SKIP Skip items during play FUNCTIONS elect and enter S menu items TUNER Search SLOW / SEARCH DIRECT TUNING through the Show player menus disc MENU PAUSE Clear menus or return SLOW / SEARCH RETURN MENU to previous menus Start slow - motion play STOP PAUSE PAUSE Stop play Pause play To view frame - by - frame Operating the TV Select channels directly RQTX0175 Adjust the volume 20 SC - HT56P_MP ( RQTX0175 - 2P ) . indb 20 9 / 19 / 2008 12 : 29 : 04 PM
Page: 21

Remote control operation guide Changing the remote control code Change the code if you find the Change the remote control’s code Change the main unit’s mode remote control unintentionally also 1 . Enter the SETUP menu . controls other Panasonic equipment . Do the following to set the remote MENU 5 . Press . SETUP control code and this unit’s remote Press and hold . control mode to the same one . RETURN 6 . While pressing , press and 2 . Select and press [ ENTER ] . hold for about 2 seconds . 3 . Select and press [ ENTER ] . To restore the code to “ 1 ” • On the main unit : In step 3 , select “ 1 ” . guide / Specifications • On the remote control : In step 6 , while 4 . Press [ - MENU , – SETUP , RETURN ] pressing [ OK ] , press and hold [ 1 ] for about repeatedly to select “ EXIT ” and 2 seconds . press [ ENTER ] . Specifications ( IHF ’ 78 ) AMPLIFIER SECTION SPEAKER SECTION g g  RMS Output Power of each channel driven Rating with low - cut filter equipped Amplifier 10 % total harmonic distortion Front speaker ( SB - HF56 ) 1 kHz Front CH 125 W per channel ( 3 Ω ) Type 1 Way , 1 Speaker tion 1 kHz Surround CH 125 W per channel ( 3 Ω ) Speaker unit 1 1 kHz Center CH 250 W per channel ( 6 Ω ) / 2 " ) cone type Full range 6.5 cm ( 2  opera 100 Hz Subwoofer CH 250 W per channel ( 6 Ω ) ( Max / 3 Ω ) Input power ( IEC ) 125 W Total RMS Output Power 1000 W Output sound pressure 80 dB / W ( 1.0 m ) Rated minimum sine wave RMS power output Frequency range 86 Hz to 25 kHz ( - 16 dB ) control 1 % total harmonic distortion ( Dolby Digital mode ) 98 Hz to 22 kHz ( - 10 dB ) 120 Hz to 20 kHz Front CH 53 W per channel ( 3 Ω ) Dimensions ( W x H x D ) 92 mm x 272 mm x 95 mm 5 23 3 120 Hz to 20 kHz Surround CH 53 W per channel ( 3 Ω ) 8 32 / 4 / " x 10 / " x 3 " ) ( 3 120 Hz to 20 kHz Center CH 133 W per channel ( 6 Ω ) kg Weight 0.74 ( 1.6 lb . ) 45 Hz to 120 Hz Subwoofer CH 141 W per channel ( 6 Ω ) emote Surround speaker ( SB - HS760 ) Total FTC Output Power 486 W Type 1 Way , 1 Speaker Rated minimum sine wave RMS power output Speaker unit 1 % total harmonic distortion ( Stereo mode ) 1 / 2 " ) cone type Full range 6.5 cm ( 2 R  120 Hz to 20 kHz Front CH 52 W per channel ( 3 Ω ) ( Max / 3 Ω ) Input power ( IEC ) 125 W 45 Hz to 150 Hz Subwoofer CH 141 W per channel ( 6 Ω ) Output sound pressure level 80 dB / W ( 1.0 m ) Total FTC Output Power 245 W Frequency range 95 Hz to 25 kHz ( - 16 dB ) Total harmonic distortion 120 Hz to 22 kHz ( - 10 dB ) half power at 1 kHz ( Front CH ) 0.5 % ( 3 Ω ) Dimensions ( W x H x D ) 92 mm x 142 mm x 95 mm 5 19 3 Input sensitivity 8 32 / 4 / " x 5 / " x 3 " ) ( 3 DVD - P , TV , BD / DVR 450 mV , IHF ' 66 kg Weight 0.6 ( 1.32 lb . ) S / N at rated power Center speaker ( SB - HC760 ) DVD - P , TV , BD / DVR 80 dB Type 2 Way , 2 Speakers Input impedance Speaker unit DVD - P , TV , BD / DVR 47 kΩ 1 / 2 " ) cone type x 2 Full range 6.5 cm ( 2 Tone controls  ( Max / 6 Ω ) Input power ( IEC ) 250 W BASS 50 Hz , + 6 dB to - 6 dB Output sound pressure level 82 dB / W ( 1.0 m ) TREBLE 20 kHz , + 6 dB to - 6 dB Crossover frequency 5 kHz Digital input / output : Frequency range 80 Hz to 25 kHz ( - 16 dB ) HDMI Input 2 96 Hz to 22 kHz ( - 10 dB ) Dimensions ( W x H x D ) 270 mm x 94 mm x 95 mm HDMI Output 1 5 11 3 8 16 / 4 / " x 3 / " x 3 " ) ( 10 Optical digital input 2 kg Weight 1.3 ( 2.9 lb . ) Coaxial digital input 1 Subwoofer ( SB - HWX50 ) Analog input / output Type 1 Way , 1 Speaker Analog audio input 3 1 / 2 " ) cone type Speaker unit ( Woofer ) 16 cm ( 6 Wireless Ready SH - FX67 Input power IEC 250 W ( Max / 6 Ω ) Output sound pressure level 78 dB / W ( 1.0 m ) OPERATING CONDITION g Frequency range 35 Hz to 200 Hz ( - 16 dB ) Operating temperature range 0 ° C to + 40 ° C ( + 32 ° F to + 104 ° F ) 40 Hz to 198 Hz ( - 10 dB ) Operating humidity range 20 % to 80 % RH ( no condensation ) Dimensions ( W x H x D ) 181 mm x 361 mm x 315 mm 1 7 13 FM TUNER SECTION g 8 32 32 " ) / " x 14 / " x 12 / ( 7 Frequency range 87.9 MHz to 107.9 MHz kg Weight 4.7 ( 10.4 lb . ) Sensitivity 11.2 dBf ( 2 µV ) , IHF ' 58 GENERAL g Total harmonic distortion Power supply AC 120 V , 60 Hz MONO 0.3 % Power consumption 125 W STEREO 0.4 % Dimensions ( W x H x D ) 430 mm x 105 mm x 388 mm 15 1 9 S / N 16 8 32 " ) / " x 4 / " x 15 / ( 16 RQTX0175 MONO 64 dB kg Weight 4 ( 8.8 lb . ) STEREO 63 dB Power consumption in standby mode : Antenna terminal 75 ( unbalanced ) Ω HDMI On : 0.7 W AM TUNER SECTION g HDMI Off : 0.3 W Frequency range 530 kHz to 1710 kHz Notes : 21 1 . Specifications are subject to change without notice . Total harmonic distortion is measured by the digital spectrum analyzer . 2 . SC - HT56P_MP ( RQTX0175 - 2P ) . indb 21 9 / 19 / 2008 12 : 29 : 08 PM
Page: 22

Troubleshooting guide Before requesting service , make the following checks . If you are in doubt about any of the check points , or if the remedies indicated in the chart do not solve the problem , refer to “ Customer Services Directory ” on page 23 . Page Common problems ■ No power . • Ensure the AC power supply cord is connected . 10 Turn the volume up . • 15 Check connections to speakers and other equipment . • 6 - 10 Select the correct source . • 15 No sound . Check that the digital signals can be decoded by this unit . • 9 Turn PCMFIX and DTS FIX off . • 13 An electrostatic discharge ( ESD ) may interrupt sound . Turn the unit off and on again . • – • k the DIMMER level . 19 Chec Display is dim . • An electrostatic discharge ( ESD ) may cause the display to dim . Turn the unit off and on again . – “ OVERLOAD ” , “ F70 ” , or “ F76 ” • urn the unit off , disconnect the AC power supply cord , and consult your dealer . – T appears on the display . “ FAN LOCK ” appears on the • ve the object obstructing the cooling fan . – Remo display . guide / Maintenance Sound ■ Sound is not heard from the II center , surround , or subwoofer 15 y be stereo . Use Dolby Pro Logic • C . The source ma or SF speakers . A ticking noise interrupts the • er wires are touching each other . Check all your speaker connections . 6 The speak sound . II II You • cannot use Dolby Pro Logic or SFC when input is PCM with sampling frequencies of 96 kHz Cannot use Dolby Pro Logic 15 or SFC . or 88.2 kHz . TroubleshootingRadio ■ iate antenna . ( You may need an outdoor antenna or one with more elements . ) Connect the appropr • 10 Adjust the position of the FM or AM antenna . • 10 The radio cannot be tuned in le . Reduce the treb • 16 , 18 or there is a lot of noise and Turn off nearby televisions , video decks and DVD players . • – interference . Separate the antenna from other cables , leads , and appliances . • – Try changing the sound mode or turning the modes off . • 15 There is a lot of noise when • ry changing the BEAT PROOF mode . 16 , 17 T listening to AM . HDMI ■ ou be playing a chapter on a DVD : Should y • When using an HDMI – – Change the audio output setting on the DVD player or DVD recorder from “ Bitstream ” to “ PCM ” . connection , the first few ( 6.1 - channel sources will however be played as 5.1 - channel . ) seconds of sound is cut off . – Select “ PCMFIX ” as instructed in “ INPUT MODE ” when you play 2 - channel sources . 13 • y the HDMI cable is not compatible with the unit’s copyright protection “ U 70 - 1 - 1 ” appears on the The equipment connected b – technology . display . • ed a signal for a picture format that is incompatible with the HDMI connection . “ U 70 - 1 - 2 ” appears on the The unit has receiv – Check the settings of the connected equipment . display . ything unusual happen using an HDMI connection : Should an • Consult your dealer if the sign remains on the display after these steps . “ U 70 - 3 ” appears on the – – Turn the connected equipment off and on again . display . – Pull out the HDMI cable then reinsert it . 8 – Reduce the amount of equipment connected in series to the HDMI terminal if exceeding 2 units . – • he unit does not work properly when wrong cords are in HDMI input and output terminals . Turn the The unit does not work T 8 unit off , unplug the AC power supply cord , and make connections again . properly . TM • our TV ( VIERA ) using the HDMI cable , switch the TV on , unplug the unit’s AC ” Connect the unit to y VIERA Link “ HDAVI Control – power supply cord , and insert it into a household AC outlet again . does not function properly . Remote control ■ The remote control does not • ies if they are worn . 4 Replace the batter work . Other products respond to the • s remote control code to “ REMOTE 2 ” . 21 Change this unit ’ remote control . Maintenance If the surfaces are dirty RQTX0175 To clean this unit , wipe with a soft , dry cloth . • Never use alcohol , paint thinner or benzine to clean this unit . • Before using chemically treated cloth , read the instructions that came with the cloth carefully . 22 SC - HT56P_MP ( RQTX0175 - 2P ) . indb 22 9 / 19 / 2008 12 : 29 : 09 PM
Page: 23

Limited Warranty Panasonic Puerto Rico , Inc . Panasonic Consumer Electronics Company , Ave . 65 de Infantería , Km . 9.5 Division of Panasonic Corporation of North America San Gabriel Industrial Park , Carolina , Puerto Rico 00985 One Panasonic Way Secaucus , New Jersey 07094 Panasonic Audio Products Limited Warranty or assistance in Puerto Rico call Panasonic Puerto Rico , Inc . Limited Warranty Coverage F ( 787 ) - 750 - 4300 or fax ( 787 ) - 768 - 2910 . If your product does not work properly because of a defect in materials or Limited Warranty Limits And Exclusions workmanship , Panasonic Consumer Electronics Company or Panasonic his warranty ONLY COVERS failures due to defects in materials T Puerto Rico , Inc . ( collectively referred to as “ the warrantor ” ) will , for the or workmanship , and DOES NOT COVER normal wear and tear or length of the period indicated on the chart below , which starts with the cosmetic damage . The warranty ALSO DOES NOT COVER damages date of original purchase ( “ warranty period ” ) , at its option either ( a ) repair which occurred in shipment , or failures which are caused by products not your product with new or refurbished parts , or ( b ) replace it with a new or supplied by the warrantor , or failures which result from accidents , misuse , a refurbished product . The decision to repair or replace will be made by abuse , neglect , mishandling , misapplication , alteration , faulty installation , the warrantor . set - up adjustments , misadjustment of consumer controls , improper Product or Part Name Parts Labor arranty maintenance , power line surge , lightning damage , modification , or commercial use ( such as in a hotel , office , restaurant , or other business ) , Audio Products ( except items listed One ( 1 ) One ( 1 ) year rental use of the product , service by anyone other than a Factory below ) year Servicenter or other Authorized Servicer , or damage that is attributable to USB Reader - Writer , Personal W acts of God . Not Limited Computer Card Adapters One ( 1 ) year HERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED T Applicable ( in exchange for defective item ) UNDER “ LIMITED WARRANTY COVERAGE ” . THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES Accessories : Headphones , Cartridges , Ninety ( 90 ) Ninety ( 90 ) RESULTING FROM THE USE OF THIS PRODUCT , OR ARISING OUT Microphones , Adapters days days OF ANY BREACH OF THIS WARRANTY . ( As examples , this excludes Not Rechargeable Batteries , DVD - R / - RAM damages for lost time , travel to and from the servicer , loss of media or en ( 10 ) days T Applicable Discs ( in exchange for defective item ) images , data or other memory content . The items listed are not exclusive , but are for illustration only . ) SD Memory Cards , Rechargeable Ninety ( 90 ) Not ALL EXPRESS AND IMPLIED WARRANTIES , INCLUDING THE WARRANTY Battery Packs ( in exchange for days Applicable OF MERCHANTABILITY , ARE LIMITED TO THE PERIOD OF THE LIMITED defective item ) WARRANTY . Some states do not allow the exclusion or limitation of incidental or uring the “ Labor ” warranty period there will be no charge for labor . D consequential damages , or limitations on how long an implied warranty During the “ Parts ” warranty period , there will be no charge for parts . You lasts , so the exclusions may not apply to you . This warranty gives you must carry - in or mail - in your product during the warranty period . If non - specific legal rights and you may also have other rights which vary from rechargeable batteries are included , they are not warranted . This warranty state to state . If a problem with this product develops during or after only applies to products purchased and serviced in the United States or the warranty period , you may contact your dealer or Servicenter . If the Puerto Rico . This warranty is extended only to the original purchaser of a problem is not handled to your satisfaction , then write to the warrantor’s new product which was not sold “ as is ” . A purchase receipt or other proof Consumer Affairs Department at the addresses listed for the warrantor . of the original purchase date is required for warranty service . PARTS AND SERVICE WHICH ARE NOT COVERED BY THIS LIMITED Carry - In or Mail - In Service WARRANTY ARE YOUR RESPONSIBILITY . Carry - In or Mail - In Service in the United States call 1 - 800 - 211 - PANA For ( 1 - 800 - 211 - 7262 ) or visit Panasonic web site : http : / / www.panasonic.com Customer Services Directory Obtain Product Information and Operating Assistance ; locate your nearest Dealer or Servicenter ; purchase Parts and Accessories ; or make Customer Service and Literature requests by visiting our Web Site at : h � p : / / www.panasonic.com / consumersupport or , contact us via the web at : h � p : / / www.panasonic.com / contactinfo You may also contact us directly at : 1 - 800 - 211 - PANA ( 7262 ) , Monday - Friday 9 am - 9 pm ; Saturday - Sunday 10 am - 7 pm , EST . For hearing or speech impaired TTY users , TTY : 1 - 877 - 833 - 8855 Accessory Purchases Purchase Parts , Accessories and Instruction Books online for all Panasonic Products by visiting our Web Site at : h � p : / / www.pstc.panasonic.com or , send your request by E - mail to : npcparts @ us.panasonic.com You may also contact us directly at : 1 - 800 - 332 - 5368 ( Phone ) 1 - 800 - 237 - 9080 ( Fax Only ) ( Monday – Friday 9 am to 8 pm , EST . ) Panasonic Service and Technology Company 20421 84th Avenue South , Kent , WA 98032 RQTX017523 ( We Accept Visa , MasterCard , Discover Card , American Express , and Personal Checks ) For hearing or speech impaired TTY users , TTY : 1 - 866 - 605 - 1277 Service in Puerto Rico Panasonic Puerto Rico , Inc . Ave . 65 de Infantería , Km . 9.5 , San Gabriel Industrial Park , Carolina , Puerto Rico 00985 Phone ( 787 ) 750 - 4300 , Fax ( 787 ) 768 - 2910 SC - HT56P_MP ( RQTX0175 - 2P ) . indb 23 9 / 19 / 2008 12 : 29 : 10 PM
Page: 24

CAUTION ! Product Service DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE , BUILT - IN CABINET OR IN ANOTHER CONFINED SPACE . 1 . Damage requiring service — The unit should be serviced by ENSURE THE UNIT IS WELL VENTILATED.TO PREVENT qualified service personnel if : RISK OF ELECTRIC SHOCK OR FIRE HAZARD DUE ( a ) The AC power supply cord or the plug has been TO OVERHEATING , ENSURE THAT CURTAINS AND damaged ; or ANY OTHER MATERIALS DO NOT OBSTRUCT THE ( b ) Objects or liquids have gotten into the unit ; or VENTILATION VENTS . ( c ) The unit has been exposed to rain ; or ( d ) The unit does not operate normally or exhibits a marked CAUTION ! change in performance ; or ( e ) The unit has been dropped or the cabinet damaged . Do not place anything on top of this unit or block the heat 2 . Servicing — Do not attempt to service the unit beyond that radiation vents in any way . In particular , do not place tape described in these operating instructions . Refer all other decks or CD / DVD players on this unit as heat radiated from it servicing to authorized servicing personnel . can damage your software . 3 . Replacement parts — When parts need replacing ensure the servicer uses parts specified by the manufacturer or The socket outlet shall be installed near the equipment and parts that have the same characteristics as the original parts . easily accessible . Unauthorized substitutes may result in fire , electric shock , or The mains plug of the power supply cord shall remain readily other hazards . operable . 4 . Safety check — After repairs or service , ask the servicer to To completely disconnect this apparatus from the AC Mains , perform safety checks to confirm that the unit is in proper disconnect the power supply cord plug from AC receptacle . working condition . Manufactured under license from Dolby Laboratories . The servicer will require all components to service your system . Dolby , Pro Logic , and the double - D symbol are trademarks of herefore , should service ever be necessary , be sure to bring T Dolby Laboratories . the entire system . Manufactured under license under U.S . Patent # ’ s : 5,451,942 ; 5,956,674 ; 5,974,380 ; 5,978,762 ; 6,487,535 & other U.S . and Product information worldwide patents issued & pending . DTS and DTS Digital Surround are registered trademarks and the DTS logos and For product information or assistance with product operation , Symbol are trademarks of DTS , Inc . © 1996 - 2008 DTS , Inc . refer to “ Customer Services Directory ” on page 23 . All Rights Reserved . The model number and serial number of this product can be HDMI , the HDMI logo and High - Definition Multimedia found on either the back or the bottom of the unit . Interface are trademarks or registered trademarks of HDMI Please note them in the space provided below and keep for Licensing LLC . future reference . EZ Sync ™ is a trademark of Panasonic Corporation . SC - HT56 MODEL NUMBER __________________________________ SERIAL NUMBER __________________________________ VIERA LINK ™ is a trademark of Panasonic Corporation . User memo : HDAVI Control ™ is a trademark of Panasonic Corporation . DATE OF PURCHASE _____________________________ DEALER NAME __________________________________ - If you see this symbol - DEALER ADDRESS _______________________________ Information on Disposal in other Countries outside the _______________________________________________________ European Union TELEPHONE NUMBER ____________________________ This symbol is only valid in the European Union . If you wish to discard this product , please contact your local authorities or dealer and ask for the correct method of disposal . Panasonic Consumer Electronics Panasonic Puerto Rico , Inc . En Company , Division of Panasonic Ave . 65 de Infantería , Km . 9.5 Corporation of North America San Gabriel Industrial Park , Carolina , One Panasonic Way Secaucus , Puerto Rico 00985 New Jersey 07094 http : / / www.panasonic.com © Panasonic Corporation 2008 RQTX0175 - 2P Printed in Malaysia H0908HU2118 SC - HT56P_MP ( RQTX0175 - 2P ) . indb 24 9 / 19 / 2008 12 : 29 : 10 PM
Search in Home Theatre System on ebay
"