Home | Register Login | Wanted Manuals | MarketPlace | Members Area | Manuals Manufacturer Directory | UPC Lookup | Information Pages | Policy


Back To Task Force Air Compressor       Model: 77813 Task Force Oil Free Portable Air Compressor
Regular Text Search or Search by Model Number

Register / log-in to add to your Hammerwall Collection.
Manual Location


Manuals For Same Model Number.
No other Manuals with the Exact Same Model Number and Manufacture.
Other Items that are in the Same Category.
77813 Task Force Oil Free Portable Air Compressor...
83691 Task Force Air Compressor Electric Handheld...

This is a partial text extraction from the pdf, to download the pdf, click the Manual tab. If you want to search this text, hold control and F, and type the word you are looking for.

Page: 1

TASK FORCE ° Item # 77813 OIL - FREEPortable Air Compressor 1.5 peak HP - - 3 gallons 125 max psi 3.4 scfm @ 40 psi - - 2.2 scfm @ 90 psi 120 VAC - - 15 amp minimum circuit Includes : 25 ft nylon coil hose and 17 pc accessory kit OWNER'S MANUAL and Parts List WARNING ! , _ Read and understand all safety precautions and operating instructions before using Portable Air Compressor . FMoidrwceussttoAmirerTescehrnviocleo , giecso , ntaIncct : . , 625 Barclay Boulevard , Lincolnshire , IL 60069 , 1 - 800 - 628 - 8815 ext . 5000 5 / 8 / 03 Task Force ® is a registered trademark of LF , LLC . All Rights Reserved . Part No . E100185
Page: 2

TABLE OF CONTENTS Page Safety Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Duty Cycle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Description of Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Important Safety Instructions & Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Operating Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Routine Maintenance Schedule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Exploded Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Troubleshooting Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Page: 3

Safety Definitions The information listed below should be read and compressor . We utilize the symbols below to allow understood by the operator . This information is given to the reader to recognize important information about their _ rotect the user while operating and storing the air safety . Indicates an imminently hazardous situation which , if Indicates a potentially hazardous situation which , if not not avoided , will result in death or serious injury . avoided , may result in minor or moderate injury . Indicates a potentially hazardous situation which , if not When used without the safety alert symbol indicates a avoided , could result in death or serious injury . potentially hazardous situation which , if not avoided , may result in property damage . Glossary CFM : Cubic feet per minute . Cut - In Pressure : The air compressor will automatically start to refill the tank when the pressure drops SCFM : Standard cubic feet per minute ; a unit of measure below the prescribed minimum . for air delivery . Cut - Out Pressure : The point at which the motor stops PSlG : Pounds per square inch gauge ; a unit of measure when the tank has reached maximum air pressure . for pressure . Code Certification : Products that bear one or more of ASME : American Society of Mechanical Engineers . the following marks : UL , CUL , ETL , CETL , have California Code : Unit may comply with California Code been evaluated by OSHA certified independent 462 ( I ) ( 2 ) / ( M ) ( 2 ) . safety laboratories and meet the applicable Underwriters Laboratories Standards for Safety . Duty Cycle This air compressor pump should not run more than check for restrictions in the air line , use a larger diameter 30 minutes of one hour . If the pump runs more than the hose , or purchase an air compressor that better matches 50 % of the duty cycle then the air requirement is greater your air requirements . than that which is supplied by the unit . You may need to Description of Operation Drain Valve : Used to drain condensation from the air tank . Air Intake Filter : Provides clean air to the pump and must Located at bottom of tank . always be kept free of debris . Check on a daily basis or before each use . Picture shown in assembly section . Motor Thermal Overload : The motor has an automatic thermal overload protector . If the motor overheats , this Air Compressor Pump : Oil free direct driven pump that protector wilt shut off the motor . The motor must be allowed compresses air which is distributed to the tank ( not shown ) . 30 minutes to cool before restarting or press the reset Check Valve : When the pump is not in operation the valve button on the motor if applicable ( not shown ) . closes to retain air pressure inside the tank . An internal Pressure Switch : This controls the power to the motor and component . also the cut - in / cut - out pressure settings . This switch serves as the Auto - On / Off positions for the unit .
Page: 4

Description of Operation - Cont . Pressure Relief Valve : The pressure relief valve , located Outlet Pressure Gauge : Indicates the outgoing air on the side of the pressure switch , is designed to pressure to the tool and is controlled by the regulator . automatically release compressed air when the air Tank Pressure Gauge : Indicates the reserve air pressure compressor reaches cut - out pressure . The released air in the tank . should only escape momentarily and the valve should then Regulator : The air pressure coming from the air tank is close . controlled by the regulator . To increase the pressure turn Tank Safety Valve : Used to allow excess tank pressure to the knob clockwise and to decrease the pressure turn the escape into the atmosphere . This valve should only open knob counterclockwise . when the tank pressure is above the maximum rated pressure . Important Safety Instructions and Guidelines • Save all instructions • Improper operation or maintenance of the warnings and safety instructions provided before using this product could result in serious this equipment . injury and / or property damage . Read and understand all of The air compressor should be operated on a dedicated 15 amp circuit . If the circuit does not have 15 free amps available , a larger circuit must be used . Always use more air hose before utilizing extension cords . All extension cords used must be 12 gauge with a maximum length of 25 ft . The circuit fuse type must be a time delay . Low voltage could cause damage to the motor . If the air compressor is in operation , all guards and covers should be attached or Risk of Moving Parts installed correctly . If any guard or cover has been damaged , do not operate the equipment until the proper personnel has correctly repaired the equipment . The power cord should be free of any moving parts , twisting and / or crimping while in use and while in storage . Risk of Burns There are surfaces on your air compressor that while in operation and thereafter can cause serious burns if touched . The equipment should be allowed time to cool before any maintenance is attempted . Items such as the compressor pump and the outlet tube are normally hot during and after operation . Risk of Falling Operation of the air compressor should always be in a position that is stable . Never use the air compressor on a rooftop or elevated position that could allow the unit to fall or be tipped over . Use additional air hose for elevated jobs . Risk from Always wear ANSI Z87 . 1 approved safety glasses with side shields when the air compressor is in use . Turn off the air compressor and drain the air tank before Flying Objects performing any type of maintenance or disassembly of the hoses or fittings . Never point any nozzle or sprayer toward any part of the body or at other people or animals . 4
Page: 5

Risk to Breathing Avoid using the air compressor in confined areas . Always have adequate space ( 12 inches ) on all sides of the air compressor . Also keep children , pets , and others out of the area of operation . This air compressor does not provide breathable air for anyone or any auxiliary breathing device . Spraying material will always need to be in another area away from the air compressor to not allow intake air to damage the air compressor filter . N'I Risk of Never utilize the air compressor in the rain or wet conditions . Any electrical issues or repairs should be performed by authorized personnel such as an electrician and should Electrical Shock comply with all national and local electrical codes . The air compressor should also have the proper three prong grounding plug , correct voltage , and adequate fuse protection . Risk of Never operate the compressor near combustible materials , gasoline or solvent vapors . If spraying flammable materials , locate the air compressor at least 20 feet away from Explosion or Fire the spray area . Never operate the air compressor indoors or in a confined area . Risk of Bursting Always drain the air compressor tank daily or after each use . If the tank develops a leak , then replace the air compressor . Never use the air compressor after a leak has been found or try to make any modifications to the tank . Never modify the air compressor's factory settings which control the tank pressure or any other function . Installation Lubrication and Oil Handle Assembly Attach the handle to the ' This compressor requires no lubrication or oiling . No break frame with the saddle bolts in procedure is required by the user . This product is factory from the outside of the handle tested to ensure proper operation and performance . and the knobs on the inside . Location of the Air Compressor To Install the Air Intake The air compressor should always be located in a clean , Filter dry , and well ventilated environment . The unit should have Remove the assembly from at a minimum , 12 inches of space on each side . The air filter the poly bag and thread the intake should be free of any debris or obstructions . Please filter assembly onto the head check the air filter on a daily basis to be sure it is clean and of the compressor as shown . in working order . Extension Cords Use only a 3 - wire extension cord that has a 3 - blade grounding plug , and a 3 - slot receptacle that will accept the plug on the product . Make sure your extension cord is in good condition . When using an extension cord , be sure to use one heavy enough to carry the current your product wilt 5
Page: 6

Installation - Cont . draw . Cords must not exceed 25 feet and No . 12 AWG size instructions are not completely understood or if in doubt as must be used . An undersized cord will cause a drop in line to whether the tool is properly grounded . voltage resulting in loss of power and overheating . Improper installation of the grounding plug can result in a risk of electric shock . If repair or replacement of the cord or plug is necessary , do not connect the grounding wire to Plug either fiat blade terminal . The wire with insulation having an outer surface that is green with or without yellow stripes is _ Grounded the grounding wire . Check with a qualified electrician or _ Outlet serviceman if the grounding instructions are not completely understood , or if in doubt as to whether the Grounding Pin product is properly grounded . Do not modify the plug provided ; if it will not fit the outlet , have the proper outlet installed by a qualified electrician . Grounding Instructions This product should be grounded . In the event of an electrical This product is for use on a circuit having a nominal rating short circuit , grounding reduces the risk of electric shock by of 120 volts and is factory - equipped with a specific electric providing an escape wire for the electric current . This cord and plug to permit connection to a proper electric product is equipped with a cord having a grounding wire circuit . Make sure that the product is connected to an outlet with an appropriate grounding plug . The plug must be having the same configuration as the plug . No adapter plugged into an outlet that is properly installed and grounded should be used with this product . If the product must be in accordance with all local codes and ordinances . Check reconnected for use on a different type of electric circuit , with a qualified electrician or service personnel if these qualified service personnel should make the reconnection . Operating Procedures Daily Start - Up Procedures 1 . Set the Auto - On / Off lever to the Off position . 2 . Check the air compressor visually for any damage or When draining the tank , always use ear and eye protection . obstruction to the intake filter . Drain the tank in a suitable location ; condensation will be 3 . Close the drain valve . present in most cases of draining . 4 . Plug the power cord into the proper receptacle . 5 . Turn the Auto - On / Off lever to the On - Auto position and 5 . Open the drain valve allowing air to bleed from the tank . the compressor will start and build air pressure in the After all of the air has bled from the tank , close the drain tank to cut - out pressure and then shut off automatically . valve to prevent debris buildup in the valve . 6 . Adjust the regulator to a PSI setting that is needed for your application and be sure it is within the safety standards required to perform the task . If using a pneumatic tool , the manufacturer should have recommendations in the Water that remains in the tank during storage wilt corrode and weaken the air tank which could cause the tank to manual for that particular tool on operating PSI settings . 7 . The air compressor is now ready for use . rupture . Please be sure to drain the tank after each use or daily . Daily Shut - Down Procedures 1 . Set the Auto - On / Off lever to the Off position . 2 . Unplug the power cord from the receptacle . 3 . Set the outlet pressure to zero on the regulator . 4 . Remove any air tools or accessories .
Page: 7

Maintenance air bled from the tank and the unit allowed time to cool . The air compressor should be turned off and unplugged from the power Personal injuries could occur from moving parts , electrical source before any maintenance is performed as well as the sources , compressed air or hot surfaces . To ensure efficient operation and longer suit the conditions under which your compressor is used . life of the air compressor unit , a routine The modifications wilt depend upon the hours of operation maintenance schedule should be followed . The following and the working environment . Air compressors used in an schedule is geared toward a consumer whose extremely dirty and / or hostile environment wilt require a compressor is used in a normal working environment on a greater frequency of all maintenance checks . daily basis . If necessary , the schedule should be modified to Routine Maintenance Schedule Daily / Each Use 5 . Always check for any unusual noise and / or vibration . 1 . Check the air compressor for any visual damage or obstructions . 2 . Inspect the air filter and replace if necessary . 3 . Manually check the safety valve to make sure of proper Any service procedure not covered in the above mentioned operation . maintenance schedule should be performed by authorized 4 . Drain any condensation from the air tank after use . service personnel . Storage For storing the air compressor , be sure to do the following : 1 . Perform the daily maintenance schedule . 4 . Open the drain valve to bleed all air from the tank . 5 . Close the drain valve . 2 . Turn the unit off and unplug the power cord from the receptacle . 6 . Store the air compressor in a clean and dry location . 3 . Remove all air hoses , accessories , and air tools from the air compressor .
Page: 8

3 , 2 \ \ \ 16 \ \ 17 \ X \ \ 18 42 41 _ 75 26 \ I / 36 60 / \ / \ \ / \ 61 \ \ 62 63 _ 64 54 68 \ 69 71 \ \ - \ 73 " 74
Page: 9

Parts List Referenc Part Referenc Part Nun / bet Humber Description Qty Number Nunlber Description Qty 1 Bolt M6xlx40 SHCS 4 4O _ crew M4xl0 2 2 Lock Washer 4 41 EI00055 3ver - Load Switch 1 3 EI00047 Exhaust Elbow 1 42 Electric Motor 1 4 1 43 Cylinder Head _ apacitor 1 5 EI00048 Air Filter 1 44 Bumper , Rubber 4 6 El00050 Motor Shroud 1 45 _ over , Motor Back 1 7 2 46 Flat Washer _ crew M5xI0 1 8 Bolt M5xI0 2 47 _ entrifugal Switch 1 4 48 9 Flat Washer ran , Motor 1 i0 Lock Washer 4 49 _ nap Rin _ i ii * EI00066 Protective Fin 1 Bolt M6xlxl6 SHCS 4 5O 12 * El00051 1 51 Gasket , Cylinder Head * EI00066 _ ut , Swivel 2 13 * El00051 Valve Plate 2 52 * EI00066 3utlet Tube 1 14 * El00051 Valve Seat 2 53 3rip , Handle 1 15 * El00051 Aluminum Gasket 1 54 Fank i 16 * El00051 1 55 EI00083 root Rubber Pad 2 Gasket , Cylinder 17 1 56 * EI00067 rank Wheel 2 Cylinder 18 M8xI . 25 Hex Nut 2 57 * EI00067 _ ap Nut 2 19 Lock Washer 2 58 EI00023 Drain Valve 1 2O Stud NSxl . 25x32 2 59 El00181 Bolt , Saddle M8x25 2 21 2 6O Side Seal , cylinder EI00192 _ andle 1 22 1 61 * EI00052 M6xlx20 Screw EI00183 Knob , Threaded 2 23 * EI00052 1 62 * EI00068 Pressure Relief Tube 1 Piston Ring Plate 24 * EI00052 Piston Ring 1 63 * EI00068 _ ut 2 25 * EI00052 1 64 EI00063 heck Valve 1 Connectin _ Rod 26 5nload Elbow 1 * EI00052 Screw M4x0 . 7x18 SHCS 1 65 27 1 66 Snap Ring EI00057 Pressure Gauge 2 28 1 67 5nload Elbow 1 Bearing , Rod 1 68 EI00058 Pressure Switch 1 29 Screw N8xl . 25x40 SHCS 3O Lock Washer 1 69 Exhaust Elbow 1 31 Eccentric 1 7O _ anifold 1 32 * EI00053 Fan 1 71 El00061 _ afety Valve 1 33 * EI00053 Lock Washer 1 72 _ ipple , male thread 1 34 * EI00053 Screw M6xlx40 SHCS 1 73 EI00059 Re @ ulator 1 35 * EI00054 Front Cover Crankcase 1 74 El00060 uick Connect , Female 1 36 * EI00054 Screw M6xlxl6 SHCS 4 75 _ lip 1 2 76 Electrical Cable 1 37 Block , Motor PV cover 38 Crankcase 1 77 EI00062 Power Cord l Kit nun / her and parts that are included are as fo Llows : 1 39 Glove , Over - Load Part # Reference # i 51 d ( 12 - 16 ) Note : Any part number field without a part number e . 22 - 26 , Descriptions are provided for reference El00 5 _ abl e ( 32 - 34 ) * This symbol represents that the part being of _ O0 _ ! _ ( 35 , 36 ) only in a kit . One of each part per kit wi ] ( 50 - 52 ) EI00067 ( 56 , 57 ) EI00068 ( 62 , 63 )
Page: 10

Troubleshooting Guide The air compressor should be turned air bled from the tank and the unit allowed time to cool . off and unplugged from the power Personal injuries could occur from moving parts , electrical source before any maintenance is performed as well as the sources , compressed air , or hot surfaces . PROBLEM POSSIBLE CORRECTION Air leaks at the check valve A defective check valve results in a constant air leak at the pressure release valve or at the pressure relief valve , when there is pressure in the tank and the compressor is shut off . Drain the tank , then remove and clean or replace the check valve . Air leaks between head and Be sure of proper torque on head bolts . If leak remains , then contact Midwest Air cylinder . Technologies . Air leak from safety valve . Operate the safety valve manually by pulling on the ring . If the valve continues to leak when in the closed position , it should be replaced . Pressure reading on the If there is an excessive amount of pressure drop when the accessory is used , regulated pressure gauge replace the regulator . drops when an accessory is used . NOTE : Adjust the regulated pressure under flow conditions ( while accessory is being used ) . It is normal for the gauge to show minimal pressure loss during initial use of the tool . Excessive tank pressure . Move the Auto - On / Off lever to the Off position . If the unit doesn't shut off , unplug it from the power source and contact Midwest Air Technologies . Motor will not start . Make sure power cord is plugged in and the switch is on . Check the reset button ( if equipped ) on the motor . Reset if needed or allow 30 minutes for cooling period . Inspect for the proper size fuse in your circuit box . If the fuse was tripped , reset it and restart the unit . If repeated tripping occurs , replace the check valve or contact Midwest Air Technologies . Excessive moisture in the Remove the water in the tank by draining after each use . High humidity discharge air . environments will cause excessive condensation . Utilize water filters on your air line . Water condensation is not caused by compressor malfunction . Be sure the compressor's air output is greater than your tool's air consumption rate . Air leaks from the tank body Never drill into , weld or otherwise modify the air tank or it will weaken . The tank can or tank welds . rupture or explode . Contact Midwest Air Technologies . 10
Page: 11

Limited Warranty Midwest Air Technologies , Inc . warrants to the original purchaser that each new air compressor and service part is free from defects in material and workmanship and agrees to repair or replace under this warranty any defective product or part as follows from the original date of purchase . 1 YEAR - Warranty on all air compressor products . 90 Days - Service parts THIS WARRANTY IS NOT TRANSFERABLE AND DOES NOT COVER : • Products sold damaged or incomplete , sold " as is " , sold reconditioned or used as rental equipment . • Delivery , installation or normal adjustments explained in the owner's manual . • Damage or liability caused by shipping , improper handling , improper installation , incorrect voltage or improper wiring , improper maintenance , improper modification , or the use of accessories and / or attachments not specifically recommended by Midwest Air Technologies . • Repairs necessary because of operator abuse or negligence , or the failure to install , operate , maintain and store the product according to the instructions in the owner's manual . • Damage caused by cold , heat , rain , excessive humidity , corrosive environments and materials , or other contaminants . • Expendable items that become worn during normal use such as drain valves , fuses , filters , air cleaners and pump oil . • Cosmetic defects that do not interfere with tool functionality . • Freight costs from customer to Midwest Air Technologies . • Repair and transportation costs of products or parts determined not to be defective . • ANY INCIDENTAL , INDIRECT OR CONSEQUENTIAL LOSS , DAMAGE , OR EXPENSE THAT MAY RESULT FROM ANY DEFECT , FAILURE OR MALFUNCTION OF THE PRODUCT . Some states do not allow the exclusion or limitation of incidental or consequential damages , so the above limitation or exclusion may not apply to you . • IMPLIED WARRANTIES , INCLUDING THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE , ARE LIMITED TO ONE YEAR FROM THE DATE OF ORIGINAL PURCHASE . Some states do not allow limitations on how long an implied warranty lasts , so the above limitations may not apply to you . WARRANTY SERVICE is available by delivering or shipping the defective product to any Midwest Air Technologies authorized warranty service locations . To determine the nearest authorized warranty service location , call the toll free number , l - 800 - 628 - 8815 ext . 5000 , 8 a . m . - 5 p . m . CST , M - F . Specific instructions regarding servicing arrangements and scheduling may vary depending on the type and size of the product and the availability of repair parts . • DO NOT return the defective product to the retailer . • Retain the original cash register sales receipt as proof of purchase for warranty work . ENGINE WARRANTIES This is the responsibility of the engine manufacturer . Warranties of merchandise sold by Midwest Air Technologies which has been manufactured by and identified as the product of another company are the responsibility of the manufacturer of that product . Midwest Air Technologies , Inc . Lincolnshire , IL 60069 11
Search in Air Compressor on ebay
"