Home | Manufacturer Directory | UPC Lookup | Wanted Manuals | Information Pages |
Register Login | Members Area |

Back To Troy-Bilt Pruner       Model: TBTP Troy-Bilt Tree Pruner
Regular Text Search or Search by Model Number

Register / log-in to add to your Hammerwall Collection.
Manual Location


Upload a pic of this item

Manuals For Same Model Number.
No other Manuals with the Exact Same Model Number and Manufacture.
Other Items that are in the Same Category.
TBTP Troy-Bilt Tree Pruner...

This is a partial text extraction from the pdf, to download the pdf, click the Manual tab. If you want to search this text, hold control and F, and type the word you are looking for.

Page: 1

® O I I _ _ Operator's Manual runer J TBTP C _ U $ LISTED A241 IMPORTANT : READ SAFETY RULES AND INSTRUCTIONS CAREFULLY 769 - 00412 ( 8 / 02 ) PRINTED IN USA
Page: 2

THANK YOU Rules for Safe Operation . . . . . . . . . . . . . . . . . . . 3 - 6 A . Important Safety Information . . . . . . . . . . . . . . 3 - 4 Thank you for buying this quality product . This modern B . Safety and International Symbols . . . . . . . . . . . . 5 outdoor power tool will provide many hours of useful C . Know Your Unit . . . . . . . . . . . . . . . . . . . . . . . . . . 6 service . You will find it to be a great labor - saving device . This operator's manual provides you with easy - to - II . Assembly Instructions . . . . . . . . . . . . . . . . . . . . . . . 7 understand operating instructions . Read the whole A . Installing The Blade . . . . . . . . . . . . . . . . . . . . . . . 7 manual and follow all the instructions to keep your new B . Installing And Adjusting The Shoulder Harness . . . 7 outdoor power tool in top operating condition . PRODUCT REFERENCES , ILLUSTRATIONS AND Ill . Operating Instructions . . . . . . . . . . . . . . . . . . . . . 8 - 9 SPECIFICATIONS A . Assembling the Coupler . . . . . . . . . . . . . . . . . . . 8 B . Operating The Pruner . . . . . . . . . . . . . . . . . . . . . 9 All information , illustrations and specifications in this C . Pruning Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 manual are based on the latest product information available at the time of printing . We reserve the right to IV . make changes at any time without notice . Maintenance and Repair Instructions . . . . . . . . . . 10 A . Pruner Blade Replacement . . . . . . . . . . . . . . . . 10 Copyright © 2002 MTD SOUTHWEST INC B . Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 All Rights Reserved . C . Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Troy - Bilt ® is a registered trademark of D . Accessories / Replacement Parts . . . . . . . . . . . . 10 MTD PRODUCTS INC V . Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 SERVICE INFORMATION Service on this unit both within and after the Vl . Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 warranty period should be performed only by an authorized and approved service dealer . CONTENTS OF CARTON Dial : This unit should consist of the following : • 1 - 330 - 558 - 7220 TBTP Tree Pruner Add - On Blade & Blade Cover Or Blade Clamp Screw and Lock Washer • 1 - 866 - 840 - 6483 to obtain the listing of the authorized service dealer nearest you . Boom Extension DO NOT RETURN THE UNIT TO THE RETAILER . Hangers NOTE : PROOF OF PURCHASE WILL BE 9 / 64 " Allen Wrench REQUIRED FOR WARRANTY SERVICE , Shoulder Harness Make sure this manual is carefully read and understood Operator's Manual before starting or operating this equipment . Product Registration Card THIS PRODUCT IS COVERED BY ONE OR MORE US NOTE : This product has been rated for use on both gas PATENTS . OTHER PATENTS PENDING . and electric powerheads . Read the Operator's Manual ( s ) and follow all warnings and safety instructions . Failure to do so can result in serious injury to the operator and / or bystanders . 2
Page: 3

The purpose of safety symbols is to attract your DANGER : Failure to obey a safety warning attention to possible dangers . The safety symbols , and will result in serious injury to yourself or to their explanations , deserve your careful attention and others . Always follow the safety precautionsnd to reduce the risk of fire , electric shock , a understanding . The safety warnings do not by IA personal injury . themselves eliminate any danger . The instructions or warnings they give are not substitutes for proper WARNING : Failure to obey a safety warning accident prevention measures . can result in injury to yourself and others . SYMBOL MEANING Always follow the safety precautions to reduce the risk of fire , electric shock , and SAFETY ALERT SYMBOL : Indicates lA personal injury . danger , warning , or caution . Attention is required in order to avoid serious personal CAUTION : Failure to obey a safety warning injury . May be used in conjunction with other may result in property damage or personal symbols or pictographs . injury to yourself or to others . Always follow the safety precautions to reduce the risk of NOTE : Advises you of information or instructions vital lA fire , electric shock , and personal injury . to the operation or maintenance of the equipment . • IMPORTANT SAFETY INFORMATION • READ ALL INSTRUCTIONS • Always stop the engine and allow it to cool before filling the fuel tank . Never remove the cap of the fuel tank , or WARNING : When using the uniL the safety add fuel , when the engine is hot . Never operate the unit rules must be followed , For your own safety I without the fuel cap securely in place . Loosen the fuel and that of bystanders , please read these tank cap slowly to relieve any pressure in the tank . instructions before operating the unit , Please • Mix and add fuel in a clean , well - ventilated area keep the nstruct ons safe for ater use . outdoors where there are no sparks or flames . Slowly BEFORE OPERATING remove the fuel cap only after stopping engine . Do not • Carefully read and understand the operator's manual smoke while fueling or mixing fuel . Wipe up any spilled of the unit that powers this attachment . fuel from the unit immediately . • Read this operating instruction manual carefully . Be • Avoid creating a source of ignition for spilled fuel . Do thoroughly familiar with the controls and the proper use not start the engine until fuel vapors dissipate . of the equipment . Know how to stop the unit and • Move the unit at least 30 feet ( 9.1 m ) from the fueling disengage the controls quickly . source and site before starting the engine . Do not smoke . Keep sparks and open flames away from the • Do not operate this unit when tired , ill , or under the influence of alcohol , drugs , or medication . area while adding fuel or operating the unit . • Never start or run the unit inside a closed room or • Never allow children to operate the equipment . Nevere allow adults unfamiliar with the instructions to use th building . Breathing exhaust fumes can kill . Operate this unit . Never allow adults to operate the equipment unit only in a well ventilated area outdoors . without proper instruction . SPECIAL SAFETY WARNINGS FOR ELECTRIC • All guards and safety attachments must be installed POWERHEADS AND TREE PRUNERS properly before operating the unit . WARNING : To reduce the risk Of electrical • Inspect the unit before use . Ensure the blade is shock , use only extension cords approved for installed correctly and secure . outdoor use , such as an extension cord of cord type SW - A , SOW - A , STW - A , STOW - A , • Keep bystanders , especially children and pets , at least SJW - A , SJOW - A , SJTW - W or SJTOW - A . 50 ft ( 15 m ) away . Extension cords are available from your local SPECIAL SAFETY WARNINGS FOR GAS retailer . Use only round - jacketed extension POWERHEADS AND TREE PRUNERS cords approved for outdoor use . • CORD SETS : Make sure your cord set is in good its vapors Can explode if ignited . Take the condition . When using a cord set , be sure to use a following precautions : cord that is heavy enough to carry the current that your unit will draw . An undersized cord set will cause a drop • Store fuel only in containers specifically designed and in line voltage resulting in loss of power and approved for the storage of such materials . overheating . See the operator's manual for the unit that will power this add - on for the recommended cord size . 3
Page: 4

• Inspect all extension cords and the unit power • Do not operate the unit faster than the speed connection periodically . Look closely for deterioration , needed to prune . Do not run the unit at high speed cuts or cracks in the insulation . Also inspect the when not pruning . connections for damage . Replace the cords if any • Always stop the unit when work is delayed or when defects or damage appear . walking from one cutting location to another . • Prevent disconnection of the tree pruner powerhead • If you strike or become entangled with a foreign object , from extension cord during operation by using a plug - stop the engine immediately and check for damage . receptacle retaining strap , connector , or by making a Have any damage repaired before attempting further knot as shown below : Extension Tree Pruner Extension Tree Pruner operations . Do not operate unit with a bent , cracked or Cord Cord COrd Cord dull blade . Discard blades that are bent , warped , cracked or broken . • Stop the unit IMMEDIATELY if you feel excessive vibration . Vibration is a sign of trouble . Inspect thoroughly for loose nuts , bolts or damage before continuing . Repair or replace affected parts as • Avoid dangerous environments . Never operate your unit necessary . in damp or wet conditions . Moisture is a shock hazard . • Stop and switch the unit to off for maintenance , • Do not use the unit in the rain . Do not use in or around water . repair , or for changing add - ons attachments . • Do not handle the plug or unit with wet hands or • Use only Genuine Factory Parts TMand accessories for standing on any wet surfaces . this unit . These are available from your authorized service dealer . Use of any Genuine Factory Parts rM or • Keep pruner away from power lines or electrical wires . accessories could lead to serious injury to the user or • Do not leave the unit plugged in when not in use , changing damage to the unit , and void your warranty . attachments or add - ons , or while being serviced . OTHER SAFETY WARNINGS WHILE OPERATING • Allow the unit to cool before storing or transporting . Be • Wear safety glasses or goggles that are marked as sure to secure the unit while transporting . meeting ANSI Z87 . 1 standards , and ear / hearing • Store the unit inside in a dry place , either locked up or protection when operating this unit . Wear a face or up high to prevent unauthorized use or damage . Keep dust mask if the operation is dusty . out of the reach of children . • Wear heavy , long pants , boots , gloves and a long • Never douse or squirt the unit with water or any other sleeve shirt . Do not wear loose clothing , jewelry , short liquid . Keep handles dry , clean and free from debris . pants , sandals or go barefoot . Secure hair above shoulder level . Clean after each use , see Cleaning and Storage instructions . • Use the unit only in daylight or good artificial light . • Keep these instructions . Refer to them often and use • Do not force unit . It will do the job better and with less them to instruct other users . If you loan someone this likelihood of injury at a rate for which it was designed . unit , also loan them these instructions . • To reduce the risk of electrical shock , keep the pruner • Only qualified personnel should perform any repairs from power lines or electrical wires . or maintenance procedures that are not described in this manual . • Use the right tool . Use this unit only as described in this manual . Do not use for any job except that for • Check shear bolts , engine mounting bolts and other which is intended . bolts at frequent intervals for proper tightness to be sure the equipment is in safe working condition . • Do not overreach . Always keep proper footing and balance . • Always refer to the Operator's Manual instructions for important details if the unit is to be stored for an • Always hold the unit with both hands when operating . extended period . Keep a firm grip on both the front and rear handle or grips . • Do not attempt to repair the machine unless you have the proper tools , and instructions for disassembly and • A coasting blade can cause injury while it continues repair of the machine . to moves after the unit is stopped . Maintain proper control of the unit until the blade has completely stopped moving . SAVE THESE INSTRUCTIONS • Keep hands , face , and feet at a distance from all moving parts . Do not attempt to touch or stop the blade when it is moving . 4
Page: 5

SAFETY AND INTERNATIONAL SYMBOLS This operator's manual describes safety and international symbols and pictographs that may appear on this product . Read the operator's manual for complete safety , assembly , operating and maintenance and repair information . SYMBOL MEANING • SAFETY ALERT SYMBOL Indicates danger , warning , or caution . May be used in conjunction with other symbols or pictographs . • WARNING - READ OPERATOR'S MANUAL Read the Operator's Manual ( s ) and follow all warnings and safety instructions . Failure to do so can result in serious injury to the operator and / or bystanders . • WEAR EYE AND HEARING PROTECTION WARNING : The operation of any power tool can be the source of thrown objects and loud noise which can cause severe eye injury and hearing loss . Always wear safety glasses or goggles eye protection meeting ANSI Z87 . 1 standards and ear protection when operating this unit . Use a full face shield when needed . • KEEP BYSTANDERS AWAY WARNING : Keep all bystanders , especially children and pets , at least 50 feet ( 15 m ) , & from the operating area . • THROWN OBJECTS AND RECIPROCATING BLADE CAN CAUSE SEVERE INJURY WARNING : Inspect the unit before use . Do not operate unit with a bent , cracked or dull blade . Keep away from the blade . _ . . " • SHARP BLADE WARNING : Sharp blade , do not touch . To prevent serious injury , always wear gloves when changing or handling the blade . • WEAR HEAD PROTECTION WARNING : Falling objects can cause severe head injury . Wear head protection when operating this unit . O • BOOM EXTENSIONS WARNING : To prevent serious injury , do not use more than one boom extension with the pruner attachment . 5
Page: 6

APPLICATIONS With Pruner Add - On : • For pruning limbs and branches up to 4 inches in diameter , Hangers Sha _ Housing Gear Housing Boom Extension Blade and Blade Cover Shoulder Harness Blade Clamp Screw and Lock Coupler Washer Foot 6
Page: 7

INSTALLING THE BLADE INSTALLING AND ADJUSTING THE SHOULDER HARNESS 1 . Slide the blade cover past the end of the blade to expose the hole for the pin . 1 . Push the strap through the center of the buckle . 2 . Insert the blade through the end of the pruner 2 . Pull the strap over the cross bar and down through housing and install the blade over the pin ( Fig . 1 ) . The the slot in the buckle ( Fig . 4 ) . blade teeth should face the foot side . 3 . Snap it on to the support fitting ( Fig . 5 ) . 3 . Install the blade clamp over the blade and pin . Install 4 . While standing in the operating position adjust length the screw with lock washer and tighten securely with to fit the operator's size . the allen wrench ( Fig . 2 ) . Lengthen the harness by pulling down on the strap 4 . Before operating unit , remove blade cover and lifting the buckle end up ( Fig . 6 ) . completely ( Fig . 3 ) . Store away for later use . Shorten the harness by pulling the strap back Blade and Blade through the buckle while holding the buckle ( Fig . 6 ) . Cover @ Pin I 0 0 Fig . 1 Fig . 4 \ \ \ \ Blade Clamp Screw and Lock Washer Blade Clamp o O Fig . 2 Fig . 5 Blade Cover \ Fig . 3 Fig . 6 7
Page: 8

ASSEMBLING THE COUPLER Coupler Primary Hole ReleaseButto _ . y The following Troy - Bilt Add - Ons are also available for your unit : \ \ Blower / Vacuum . . . . . . . . . . . . . . . . . . . . . . . . . . . . TBBV Cultivator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TBGC Hedge Trimmer . . . . . . . . . . . . . . . . . . . . . . . . . . . . TBHS Edger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TBLE Upper Shaft Lower Shaft Straight Shaft Trimmer . . . . . . . . . . . . . . . . . . . . . . TBSS Housing Knob Housing Snow Thrower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TBST Fig . 8 Turbo Blower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TBTB 4 . Turn the knob clockwise to tighten ( Fig . 9 ) . Removing the add - on : primary hole ( Fig . 8 ) and securely tighten the I JCAUTL ' ° OctNkher : ele ° bs ° ett ° innthe 1 knob before operating this unit . J manual fo [ add : 0n pri0r t0 operation : J 1 . Turn the knob counterclockwise to loosen ( Fig . 7 ) . 2 . Press and hold the release button ( Fig . 7 ) . 3 . While firmly holding the upper shaft housing , pull the tree pruner attachment out of the coupler ( Fig . 8 ) . Installing the add - on : and damage to the unit , shut unit off before Fig . 9 remov ng or nsta ng add - ons . J NOTE : To make installing or removing the add - on _ I k CAUTION : The tree pruner add - on with the easier , place the unit on the ground or on a coupler system is to be used in the primary work bench . hole only , Using the wrong hole could lead to 1 . Turn knob counterclockwise to loosen ( Fig . 7 ) . persona njury or damage to the un t . 2 . While firmly holding the add - on , push it straight into Installing the boom extension : the coupler ( Fig . 8 ) . When using the boom extension , follow steps 1 - 3 under Installing the Attachment or Add - ons . Install the 3 . While firmly holding the add - on , push it straight into extension to the power head , then repeat the steps for the coupler ( Fig . 2 ) . installing the pruner attachment to the extension . Check Flex Shaft Engagement Prior to Using Coupler Release Button Guide Recess 1 . Start the unit . 2 . Briefly engage and release the trigger . 3 . Check that add - on is operating . 4 . If the add - on is not operating , remove add - on and repeat steps for installing the add - on . 5 . Recheck operation of add - on attachment . Iockwise Knob Fig . 7 NOTE : Aligning the release button with the guide recess will help installation ( Fig . 7 ) . 8
Page: 9

OPERATINGTHE PRUNER WARNINGA : lways wear eye , hearing , foot I and body protection to reduce the risk of injury when operating this unit . Before operating the unit , stand in the operating position ( Figs . 10 & 11 ) . Check for the following : • The operator is wearing a face shield , head protection and proper clothing . • Harness is adjusted to proper position . • The handle is adjusted to provide the best grip . Fig . 14 • The operator has a firm grip on both the throttle grip PRUNING TIPS and handle . Why Prune ? Trees need to be trained . If they are not , they may grow into a tangled and potentially dangerous area of the yard . Pruning is useful for sizing , shaping , removing broken branches and maintaining the health of the tree . When to Prune ? Pruning can be done at any time during the year . But , the best time is during the dormant ( winter ) season . What to Look for ? Finding problem areas in a tree can be difficult . Look for and remove : • Dead or dying branches . Cut them back to a healthy branch Fig . 10 Fig . 11 or trunk because they may carry insects or diseases . 1 . When operating the pruner , rest the foot of the pruner • Branch stubs . These occur when a prior pruning was against the tree limb that is being cut ( Fig . 12 ) . done incorrectly or if a branch broke off during a storm . 2 . Make the first cut one ( 1 ) foot ( 30.5 cm ) from where Cut the stubs back to the closest healthy branch or trunk . the final cut will be ( Fig . 13 ) . • Future growth . If a tree limb is growing towards a fence 3 . Cut to the outside of the branch collar to avoid or building , remove it early . The older the tree , the damage to the tree ( Fig . 14 ) longer it takes for cutting wounds to heal . How to Prune Correctly • Don't cause damage to the trunk bark by cutting too close to the trunk . • Cut the branch so that the wound is as small as possible . • Don't leave a long branch stub . It can lead to rot or Foot insect infestation . • Use a sharp blade to make cuts that are clean and smooth . Fig . 12 Fig . 13 9
Page: 10

PRUNER BLADE REPLACEMENT always wear gloves while handling , removing or nsta ng the bade . Blade Clamp Screw and Lock Washer I long periods of use . To avoid serious I personal injury , do not touch the housing Until I _ iII _ I WARNING : The pruner housing gets hot after I Blade Clamp F t has coo ed . o o / Replacing the Blade Fig . 15 Replace the blade if : PRUNER GEAR HOUSING • it is missing teeth , dull , bent or damaged . All internal parts are lubricated at the factory and require • you are required to force the moving blade through no maintenance . Do not disassemble the pruner . Contact wood . an authorized service dealer for any internal repairs . • the engine slows excessively while cutting . CLEANING • every one ( 1 ) hour ( accumulative ) of actual cutting time . Use a small brush to clean offthe outside of the unit . Do not use strong detergents . Household cleaners that 1 . Install the blade cover on the blade . contain aromatic oils such as pine and lemon , and 2 . Remove the blade clamp screw , lock washer and solvents such as kerosene , can damage plastic housing blade clamp ( Fig . 15 ) . or handle . Wipe off any moisture with a soft cloth . 3 . Reinstall the blade following the steps under STORAGE Installing the Blade in the assembly section . • Store the unit inside in a dry place , either locked up or Cleaning the Blade up high to prevent unauthorized use or damage . Keep out of the reach of children . • Clean the blade after each use to remove pitch , gum , sap , etc . ACCESSORIES / REPLACEMENT PARTS • Clean the blade with commercially available saw blade Blade ( 2 pack ) . . . . . . . . . . . . . . . . . . . . . . . 791 - 180966B cleaners that are available at your local hardware store . Blade Clamp . . . . . . . . . . . . . . . . . . . . . . . . . 791 - 181155 • Discard the blade if it is missing teeth , dull , bent or Blade Clamp Screw and Lock Washer . . . . . 791 - 181156 damaged in any way . Use only original Genuine Factory Parts rM replacement • Always install the blade cover on the blade when not in use . parts . 10
Page: 11

Unit Weight ( Without Boom Extension ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Ibs . ( 1.36 kg . ) Unit Weight ( Boom Extension ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5 Ibs . ( 0.68 kg . ) Unit Length ( Without Boom Extension and Blade ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 inches ( 0.84 m ) Length of Boom Extension . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 inches ( 0.66 m ) Blade Length ( Maximum cut diameter ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 inches ( 10.16 cm ) Strokes per Minute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Up to 2000 Shoulder Harness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Quick Snap 11
Page: 12

' REPLACEMENT PARTS - MODEL TBTP TREE PRUNER ADD - ON PPN 41AJTP - C063 @ Q @ Item Part NO . Description Item Part NO . Description 1 791 - 180968B Blade ( 2 pack ) 16 791 - 181883 Anti . Rotation Screw 2 791 _ 181153 Blade Cover 17 791 _ 181166 Drive Shaft Assembly 18 79 % 181992 Drive Shaft Housing Assembly 3 791 - 181155 Blade Clamp 4 791 - 181158 Blade Clamp Screw & Washer Assembly 19 79 % 612605 Hanger 20 791 _ 181980 Couple [ ( includes items 2 ! - 24 ) 5 79 % 181874 Arbor Assembly 6 79 ! _ 181875 Bevel Gear 21 791 - 181617 Bolt 7 791 - 181876 Washer 22 79 % 181981 Adjustment Knob 8 791 - 181877 Pinion Bevel Gear 23 791 _ 181886 Knob Retaining Nut 9 791 - 181851 Insulator 24 791 - 182057 Screw 10 791 _ ! 81878 Slide Bushing 25 791 - 181161 Extension Boom and F ! ex Shaft Assembly 11 791 - 181879 Felt Seal 26 753 _ 1214 AntFRotation Screw 12 791 - 181880 Slider ( 2 _ pack ) 79 % 181167 Allen Wrench 9 / 64 " 13 791 - 181881 Rubber Plug 791 _ 682075B Shoulder Harness 14 791.181991 Housing set 15 79 ! _ 181345 Housing Screw ( 8 required ) Not Shown Issued 8 / 02
Page: 13

MANUFACTURER'S LIMITED WARRANTY FOR : O n n _ . ' _ " . _ " The limited warranty set forth below is given by MTD No implied warranty , including any implied warranty of SOUTHWEST INC ( " MTD " ) with respect with new merchantability or fitness for a particular purpose , merchandise purchased and used in the United States , its applies after the applicable period of express written possessions and territories . warranty above as to the parts as identified . No other express warranty or guaranty , whether written or oral , MTD warrants this product against defects in material and except as mentioned above , given by any person or workmanship for a period of two ( 2 ) years commencing on entity , including a dealer or retailer , with respect to any the date of original purchase and will , at its option , repair or product shall bind MTD . During the period of the replace , free of charge , any part found to be defective in Warranty , the exclusive remedy is repair or replacement material or workmanship . This limited warranty shall only of the product as set forth above . ( Some states do not apply if this product has been operated and maintained in allow limitations on how long an implied warranty lasts , so accordance with the Operator's Manual furnished with the the above limitation may not apply to you . ) product , and has not been subject to misuse , abuse , commercial use , neglect , accident , improper maintenance , The provisions as set forth in this Warranty provide alteration , vandalism , theft , fire , water , or damage because the sole and exclusive remedy arising from the sales . of other peril or natural disaster . Damage resulting from the MTD shall not be liable for incidental or consequential installation or use of any accessory or attachment not loss or damages including , without limitation , approved by MTD for use with the product ( s ) covered by expenses incurred for substitute or replacement lawn this manual will void your warranty as to any resulting care services , for transportation or for related damage . expenses , or for rental expenses to temporarily replace a warranted product . ( Some states do not allow This warranty is limited to ninety ( 90 ) days from the date of limitations on how long an implied warranty lasts , so the original retail purchase for any MTD product that is used for above limitation may not apply to you . ) rental or commercial purposes , or any other income - producing purpose . In no event shall recovery of any kind be greater than the amount of the purchase pdce of the product sold . Alteration HOW TO OBTAIN SERVICE : Warranty service is available , of the safety features of the product shall void this Warranty . WITH PROOF OF PURCHASE THROUGH YOUR LOCAL You assume the risk and liability for loss , damage , or injury to AUTHORIZED SERVICE DEALER . To locate the dealer in you and your property and / or to others and their property your area , please check for a listing in the Yellow Pages or arising out of the use or misuse or inability to use the product . contact the Customer Service Department of MTD SOUTHWEST INC by calling 1 - 800 - 345 - 8746 or writing toda 550 N . 54th Street , Chandler , Arizona 85226 or if in Cana This limited warranty shall not extend to anyone other call 1 - 800 - 668 - 1238 . No product returned directly to the than the original purchaser , original lessee or the person factory will be accepted unless prior written permission has for whom it was purchased as a gift . been extended by the Customer Service Department of How State Law Relates to this Warranty : This warranty MTD SOUTHWEST INC . gives you specific legal rights , and you may also have This limited warranty does not provide coverage in the other rights which vary from state to state . following cases : To locate your nearest service dealer dial A . Wear items - Blade 1 - 800 - 345 - 8746 in the United States or 1 - 800 - 668 - I 238 in Canada . B . MTD does not extend any warranty for products sold or exported outside of the United States of America , its possessions and territories , except those sold MTD SOUTHWEST INC through MTD's authorized channels of export distribution 550 N . 54th Street MTD reserves the right to change or improve the design Chandler , AZ 85226 U . S . A . of any TrimmerPlus ® Product without assuming any obligation to modify any product previously manufactured .
Search in Pruner on ebay
"